PIVOT Stove Heating RSF6 Insulated Room Seal Flue Kit Instruction Manual
- June 12, 2024
- PIVOT Stove Heating
Table of Contents
PIVOT Stove Heating RSF6 Insulated Room Seal Flue Kit
Product Information
The Insulated Room Sealed Flue Kit is a fully sealed flue kit that is designed to be used with a heater. It is made from stainless steel and has a painted insulated RSF inside the home and a stainless steel RSF outside the home. The kit also includes an optional support brace.
Product Usage Instructions
-
Flue Assembly: Connect the RSF FK6FULLYINSULATED or any other compatible RSF FK series flue to the heater. – Use the supplied locking band to secure the flue to the heater. – If required, use the RSF-6STARTER adapter to connect a single flue to a twin flue.
-
Ceiling Ring Installation: Attach the E Ceiling Ring to the top of the flue assembly. – Use the supplied locking band to secure the ceiling ring to the flue.
-
Wind Cowl Installation: Attach the FWind Cowl (made of stainless steel) to the top of the flue assembly – Ensure that the wind cowl is securely attached toprevent wind interference.
-
Room Sealed Flue Adapter Installation: If needed, use the G Room Sealed Flue Adapter to connect a single flue to a twin flue. – Connect one end of the adapter to the flue assembly and the other end to the twin flues. Use the supplied locking bands to secure the connections.
Note: The product is available in different sizes, such as RSF FK. -
FULLYINSULATED, RSF FK7FULLYINSULATED, RSF FK8FULLYINSULATED, and RSF FK9FULLYINSULATED. Choose the appropriate size based on your specific requirements. Please refer to the product manual for detailed installation instructions and safety guidelines.
Optional Support Brace
NOTE
- The optional support brace (N) has the ability to adjust to any angle of adjacent roof beams.
- There is a 25mm clearance between the flue and any timber at all times*
Flue Assembly
NOTE:
To assemble the flue, first lock it into place, second secure V locking
band around joint
Fully Sealed Flue Kit
Ceiling Ring
NOTE:
There is a 25mm clearance between the flue and any timber at all times
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>