Gemini GSW-T1500PK Bluetooth Portable Wireless 15″ Inch Woofer User Manual
- June 4, 2024
- gemini
Table of Contents
GSW-T1500PK Bluetooth Portable Wireless 15″ Inch Woofer
User Manual
GSW-T1500PK
USER MANUAL
Introduction
Thank you for purchasing our GSW-T 1500PK. We are confident that the GEMINI
family of products will make your life easier by using the latest
technological advancements in sound reproduction and will raise the bar for
pro audio products.
Support
At GEMINI, our highest priority is making your experience unforgettable. Need
help with setting up, troubleshooting, or looking for some tips? We’re here
for you, Monday through Friday 9 AM to 5 PM EST
1-732-346-0061
www.geminisound.com
What’s Included
Please ensure that you find these aceesesnies included with your GSW-T1500PK
speaker:
(1) GSW-T1500PK
(1) Speaker Stand
(1) Wired Microphone
(1) Power Cord
Power On
-
Connect power from the adaptor to the wall and connection on the back of the speaker
-
Press the power button on the front of the speaker.
-
While the speaker is connected to power, it will charge. There is a battery icon indicating the fullness of the internal battery. When it is fully charged you can disconnect from direct power.
Bluetooth Pairing
- Press the BLUETOOTH button. The speaker is now in Bluetooth pairing mode
- Search for GMN-GSW on your phone under Bluetooth settings and connect to the speaker
- The speaker will play two tones to indicate that it is now paired with your phone
Connecting & Playing
-
To connect other Input sources -i. Open front flap to display USB, Aux and Mit inputs on the front of the speaker Connect USB cable to USE Input Iii. Connect Aux cable to Aux input
-
With the speaker turned on, press the SOURCE button. i. Press 1 time for LINE IN MODE ii. Press 2 times for FM mode ill. Press 3 times for USB mode iv. Press 4 times for Bluetooth mode
Adjusting Volume
• The MASTER VOLUME controls arc located on the front panel of the speaker. Press the VOLUME UP button 1 time to turn the volume up. Press the VOLUME DOWN button 1 time to turn the volume down. VL will appear on screen & you can adjust the levels from 1 to 32
Beast Mode
- Enable Beast mode by pressing the BEAST button on the front panel of the weaker. The word BEAST will pop up on the LCD Screen. To turn it off, simply press the button again 1 time
Controlling Playback
-
Locate the PLAY/PAUSE, SKIP AHEAD and SKIP BACKWARD controls on the front of the speaker panel. Press the PLAY/ PAUSE button one time to PLAY from BLUETOOTH, LINE IN or USB sources.
-
To repeat a track locate the REPEAT 1 button. Press that button 1 time will enable the current track to be repeated.
-
Press the SKIP AHEAD button to advance to the next track. Press the SKIP BACKWARD button to return to the previous track.
-
To change radio stations in FM MODE. Press the SKIP AHEAD button to increase stations forward. Press the SKIP BACKWARD button to decrease stations backward
Equalizer EQ
- The GSW-1500PK has 5 different EQ settings, NORM, CLUB, VOCL, ROCK, POP. Located the EQbutton. Pressing it I time will change the EQsettings. The display will indicate what setting you are currently using.
Bluetooth Linking
- To LINK your speaker to another GSW-T1500PK, start by pressing the LINK button. You will hear a set of tones to indicate that the speaker is now in linking mode. The word LINK should appear in the lower left-hand corner of the LCD screen. Press the LINK button on the other speaker and you will hear the same tones. The speakers are now linked.
Controlling the Lights
-
The GSW-T1500PK speaker has 3 light settings; STEADY FLASHING, FLASHING TO THE MUSIC, and FADE IN/OUT. To activate STEADY FLASHING, Locate the LIGHTS button on the front of the LCD display. Press 1 time to turn the lights on and activate steady flashing mode. Press 2 times to turn on flashing to the music mode. Press 3. tidies to activate fade in/out mode. Press 4 times to turn off the lights.
-
The GSW-T1500PK speaker has 12 different light colors. To change colors, Locate the COLOR button. Each time you press the button it will change the color of the lights in the speaker
Connecting & Controlling the Mic
-
To connect a microphone to your GSW-911500PK speaker. Locate the front input connection panel on the front of the speaker. Open the rubber panel door. Connect microphone cable to input labeled MIC.
-
To control the microphone volume, locate the MIC – and VOL f buttons on the front panel of the speaker. Press the VOL + button I time to increase the microphone volume. Press the MIC — button in time to decrease the microphone volume.
GSW-71500PK Features
- Power ON/OFF Switch: Turns the unit on and off
- Volume Up: 7.1tras the main volume up
- Volume Down: Turns the volume down
- Beast Turn on and off Beast Mode
- Skip Ahead: Moves track ahead on BluetoothfUSIS meth and moves the radio station Jenard on FM mode
- Play/Pause: Starts and Stops music Bluetooth/ LISS mode
- Skip backward: Moves I track backward in BluetoothUSB mode and moves the radio station backward on FM mode
- EQ: Switches between equalizing settings
- Source: Switches between input sources
- Track Repeat Repeats the current track in Blue tooth/USB modes.
- Link: Initiates Bluetooth Linking
- Bluetooth: Activates Bluetonth Pelting
- Lights: Turns on/off and isolates different light modes
- Color. Changes the calms of lights and speaker
- MIc Vol Up: Increases the Microphone volume
- MN Vol Down: Decrease, the Microphone volume
- Aux Input Attach aux input here
- Microphone Input: Mach microphone input here
- USB Input: Meg in US$ input here
- Link Out To mimed output in another source
- DC IN: Plug in the power source.
Responsible Party Name: Innovative Concepts & Design
Company address: ;58 Florida Grove Road Perth
Amboy, NJ 08861, USA
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. The operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2( This device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment. has been tested and found to comply with the limits
for a class B digital device, pursuant to Part 15 of the FCC Rules. This
equipment generates uses and can radiate radio frequency energy and if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause interference to radio or television reception, which can be
determined by turning the equipment off and then on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to a different outlet so that the equipment and receiver are on different branch circuits.
- Consult the dealer or an experienced radio/TV technician for help.
FCC ID: 2AE6G-ALP-1500
Caution
- All operating instructions should be read before using this equipment.
- To reduce the risk of electrical shock, do not open the unit. There are no user-replaceable parts inside. Please refer servicing to a qualified Gemini service technician. Do not attempt to return this equipment to your dealer.
- Do not expose this unit to direct sunlight or to a heat source such as ate radiator or stove.
- This unit should be cleaned only with a damp cloth. Avoid smokers or other cleaning detergents.
- When moving this equipment, it should be placed in its original carton and packaging This will reduce the risk of damage during transit.
- Do not expose this unit to water or heat.
- Do not use cleaning products or lubricants on the controls or switches.
Precautions
Please read carefully before proceeding: Always follow the basic precautions
listed below to avoid the possibility of serious injury or even death from
electrical shock, or short-circuiting. damages, fire, or other hazards.
-
Please read, follow, and keep all instructions before using this product
-
Cleaning: The product should be cleaned only with a polishing cloth or a soft dry cloth. Never clean with furniture wax, benzene, or other volatile liquids since they may corrode the cabinet
-
Water and Moisture: Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.
-
Do Not Open: Do not open the device or attempt to disassemble the internal parts or modify them in any way. The device contains no user-serviceable parts. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified Gemini service personnel.
-
Replacement Parts: When replacement parts are required, be sure the service technician has used replacement pans specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock; or other hazards.
-
Location: If you use a stand, check the stand’s specifications and make sure that it is sturdy enough to support the weight of the speaker. You may need to limit the number of people around the placed stand, to avoid toppling the device or causing damage to the internal components. Also, be sure to keep the following cautions.
– Use the speaker stands with their legs fully opened.
– Mount only one speaker on each speaker stands.
– Tighten fastening screws securely.
– Remove the speakers from the stands before moving the stands or adjusting their height.
– Add weight such as sand bags around the stand legs to prevent them from falling over.
– Use the stand, a maximum height of 140cm (551.
– If you use the socket of a subwoofer to allow mounting of a satellite speaker, use a pole 100cm max. with an outer diameter of 35mm (1-3/8″).
– When carrying the device, always use two or more people
– Before moving the unit, remove all plugged cables.
– Do not use the speaker’s handles for suspended installation. Doing so can result in damage or injury
– Do not expose the device to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater) to prevent the possibility of panel disfiguration or damage to the internal components.
– Do not place the device in an unstable position where it may accidentally fall over. -
Rigging Safety: The GSW-T1500PK Rigging System’s provisions for use require that it be installed in actor dance with the following specifications. Before you begin installation:
– Inspect all components to ensure they are in good working order, taking care that all tracks, trusses, and connecting components (cables, fittings; arc undamaged.
— Use only the parts specified in this operating manual! Be sure to protect .cabinets against rain and moisture when they are deployed outdoors.
– If parts of the load-bearing equipment have been deformed, it is up to the manufacturer to determine if they are repairable.
The principle requirement for safe handling and trouble-free operation of this rigging system is a thorough understanding of fundamental operating safety and safety regulations. This operating manual contains the most vital instructions concerning the safe operation of the enclosures. -
Connections: Before connecting the device to other devices, turn off the power for all devices. Before turning the power on or off for all devices, set all volume levels to a minimum.
Warranty and Repair
All Gemini products are designed and manufactured to the highest standards in
the industry. With proper care and maintenance, your product will provide
years of reliable service.
Limited Warranty
A. Gemini guarantees its products to be free from defects in materials
and workmanship for one (1) year from the original purchase date.
B. This limited warranty does not cover damage or failure caused by
abuse, misuse, abnormal use, faulty installation, improper maintenance or any
repairs other than those provided by Gemini.
C. There are no obligations of liability on the part of Gemini for
consequential damages arising out of or in connection with the use or
performance of the product or other indirect damages with respect to loss of
property; revenues, of profit, or costs of removal, installation, or
reinstallation. All implied warranties for Gemini, including implied
warranties for fitness, arc limited in duration to one (1) year from the
original date of purchase, unless otherwise mandated by local statutes.
Return/Repair
A. In the U.S.A., please call our helpful Customer Service
Representatives at 732-346-0061, and
they will be happy to give you a Return Authorization Number (RA#) and the
address of an authorized service center closest to you.
B. After receiving an RA#, include it copy of the original sales receipt,
with the defective product and a description of the defect. Send by insured
freight to: Gemini and use the address provided by your customer service
representative. Your RA# must be written on the outside of the package, or
processing will be delayed indefinitely!
C. Service covered under warranty will be paid for by Gemini and returned
to you. For non-war-ran tied products. Gemini will repair your unit after
payment is received. Repair charges do not include return freight. Freight
charges will be added to the repair charges.
D. On warranty service, you pay for shipping to Gemini,we pay for return
shipping within the Continental United States. Alaska, Hawaii, Puerto Rico,
Canada, Bahamas, and the Virgin Islands will be charged for freight.
E. Please allow 2-3 weeks for the return of your product. Under normal
circumstances, your product will spend no more than 10 working days at Gemini.
We are not responsible for shipping times.
Parts of the design of this product may be protected by worldwide patents.
Information in this manual is subject to change without notice and does not
represent a commitment on the part of the vendor. Gemini shall not be liable
for any loss or damage whatsoever arising from the use of information or any
error contained in this manual. No part of this manual may be reproduced,
stored in a retrieval system or transmitted, in any form or by any means,
electronic, electrical, mechanical, optical, or chemical, including
photocopying and recording, for any purpose without the express written
permission of Gemini. It is recommended that all maintenance and service on
this product is performed by Gemini or its authorized agents. Gemini will not
accept liability for loss or damage caused by maintenance or repair performed
by unauthorized personnel.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>