Shenzhen Zhirenneng Technology PNB11 Color Bulb User Manual
- June 6, 2024
- Shenzhen Zhirenneng Technology
Table of Contents
User Manual
Color Bulb
PNB11
In the Box
Porik Bulb x 1
User Manuel x 1
Parameters
Name: Porik Color Bulb
Model /HVIN: PNB11
Power Rated: 9W
Lamp Interface: E26
Luminous Flux: 8001m
Wi-Fi Standard: 2.4GHz
Color Temperature: 2700K-6500K
Input Voltage: US/CA: AC110V-130V 50/60Hz
Compatibility: Android 4.1+, iOS 7.0+
IC
FCC ID
Note:
- Make sure that the power is off while connecting.
- EZ/AP mode will not show out if the switching speed is too fast.
- 5GHz network is not supported, 2.4GHz only.
Caution, Don’t put it in your mouth!
Warranty
- 30-day return policy & 2-year limited warranty.
- Timely customer service via support@Porik.co
- Lifetime professional tech support provided by Porik.
Connection Process
- Install the Porik bulb.
- Turn on the power.
- Open the OSAIO App and tap “+”.
- Follow the instructions to finish.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
NOTE : This equipment complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement: The equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of 20cm between the
radiator and your body.
RF exposure Statement This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20cm between the radiator
and your body. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
IC Warning
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate
using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference to
other users, the antenna type and its gain should be so chosen that the
equivalent isotopically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
RF exposure Statement This equipment complies with IC RSS – 102 radiation
exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of 20cm between the
radiator and your body.
https://download.osaio.net/app
NEED HELP?
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>