gemini GGO-2650L Portable Bluetooth Party Speaker User Manual

gemini GGO-2650L Portable Bluetooth Party Speaker User Manual

Product Feature (subject to the actual product)

1. Long press to power on/off.
2. Short press to turn on the ambient light, long press to directly turn off the ambient light.
3. [EQ 】: Short press to switch two different sound effects.
4. [REC]: For the recording function and Bluetooth internal recording, you need to insert a USB or Micros SD, then insert a wired microphone or turn on the wireless microphone, and then short press the record button to record. When playing a recording file, long press the record button to delete the recording. When playing music, long press the record button to quickly enter the recording file.
5. [VOL ): Turn the knob to the left to decrease volume, turn the knob to the right to increase volume.
6. [ 】: Short press to convert mode: Bluetooth, Micro SD, AUX, USB.Long press for TWS function.
7. [ 】: Short press to skip to previous song when playing music.
8. Short press to skip to next song when playing music.
9. [ 】: Short press to play/pause. In Bluetooth mode, long press the play button to reset the Bluetooth connection.
10. [-MIC VOL+】: Turn the knob to the left to decrease microphone volume, turn the knob to the right to increase microphone volume.
11. [-GUITAR+】: Turn the knob to the left to decrease guitar volume, tum the knob to the right to increase guitar volume.
12. [-TREBLE+]: Turn the knob to the left to decrease treble, turn the knob to the right to increase treble.
13. [-BASS+): Turn the knob to the left to decrease bass, turn the knob to the right to increase bass.
14. [-ECHO+】: Turn the knob to the left to decrease microphone echo, turn the knob to the right to increase microphone echo.
15. [MIC】: Insert wired microphone.
16. [AUX】: AUX audio input. (Built-in hidden reset button. If device cannot be muted on/off normally, insert paper clip into the hole to press button / reset unit.
17. [USB】: Insert USB to play MP3 music. (Max workable capacity for USB is 64 GB, if more than 64 GB it can not work)
18. [TF 】: Insert Micro SD to play MP3 music. (Max workable capacity for Micro SD is 64 GB, if more than 64 GB it can not work)
19. [DC IN]: Charging the battery with adaptor.
20. [Charging Indicator): The light is RED when Charging and GREEN when fully charged.
21. [GUITAR]: Insert an instrument to play.

Bluetooth Connection Operation

Turn on to enter the Bluetooth mode. Then turn on the mobile Bluetooth and search Gemini GGO-2650L. If there is a prompt to use password, please enter “0000” and click confirm connection.

Bluetooth internal recording operation

1. Insert Micro SD or USB, then switch to Bluetooth mode.
2. The mobile phone plays the accompaniment music after connecting to the Bluetooth.
3. Insert in a wired microphone or turn on a wireless microphone.
4. Short press the record button, the Bluetooth internal recording starts to work, and then short press the record button to finish the internal recording and start to play the internal recording file.

Charging Instruction

1. To protect the performance of the battery, avoid using the machine while charging.
2. Note: The machine has no power bank function, it is forbidden to connect other devices through the USB interface.
3. Pls use 12V1.5A adaptor (which this machine comes with) for charging the battery, the red light is on when charging, the red light is off when fully charged and the green light is on.

TWS connection operation

1. In Bluetooth mode, turn on the two Bluetooth speaker device at the same time, and then turn on any speaker and long press key to pair with another speaker to TWS connect, long press again to disconnect TWS.
2. The optimal connection distance between two Bluetooth speakers is about 5 meters.
   
   When using the TWS function, place the two speakers horizontally in the same direction.

Troubleshooting

1. Automatically shut down when turned on The battery is low, please fully charge it before use.

2. The player automatically shuts down or restarts The battery is low, please fully charge it before use.

3. The charging light is not on, not charging
   Check if the adaptor wire is plugged in properly and not damaged. Use only 12V-1.5A adaptor for charging the speaker.

4. Bluetooth status is silent
   Pls make sure the Bluetooth is paired correctly, and the Bluetooth device is playing, the volume is turned up.

5. Micro SD/USB playback is silent
   Check whether the Micro SD/USB is inserted in the correct direction and in place. (Note: The music in the Micro SD/ USB mainly supports MP3 compressed audio files and WMA lossless audio files playback);

6. Recording doesn’t work
   Check that there is space on the Micro SD or USB drive, if not, delete some files to reserve storage space. Recording should be in Micro SD mode, USB mode and insert a wired microphone or turn on a wireless microphone.

Wireless microphone operation

1. Long press to power ON/OFF.
2. When the microphone is not connected to the device, the display will flicker slowly. When the microphone is successfully connected to the device, the display screen will stop flashing and display a steady state. The display blinks quickly when the battery is low.
3. When wireless microphone battery is dead, you can twist the microphone to the left, and replace the AA battery. Please pay attention to the positive and negative poles when replacing the battery.
4. Feedback: Please do not put the microphone close to the speaker device, this will cause a feedback loop of harsh noise. Keep the microphone a little bit away from or behind the speaker or try to turn down the volume of microphone if feedback occurs.

Remote operation instruction

1. Under normal circumstances, the remote control should be used within the receiving range of about 6 meters and 30 degrees from the device receiving window.
2. When operating the remote, please aim it at the receiving window of the device. There should be no obstacles between the remote and the device.
3. If the receiving window of the device is placed under a strong light, the operation panel of the remote may malfunction. In this case, please move the device away to avoid direct exposure.
4. When the remote no battery, you can replace the AAA batteries. Avoid mixing old and new batteries. Please check the remote batteries regularly to see if they need to be replaced.

Technical Specifications

Input voltage : 12V 1.5A
Output Power : 200W
Frequency effect: 60Hz-12KHz
S/N: ≥80dB
Battery: 7.4V/6000mAh

Package Contents

1. Speaker: 1 PC
2. Charging Cable : 1 PC
3. AUX Cable : 1 PC
4. User Manual :  1 PC
5. Remoter: 1 PC
6. Wireless Microphone: 1 PC
   

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>