MICROTECH 141085113 Precision Digital Caliper User Manual
- June 13, 2024
- microtech
Table of Contents
MICROTECH 141085113 Precision Digital Caliper
MODIFICATIONS
Item No| Range| Resolution| Accuracy| Display|
Protection
---|---|---|---|---|---
| mm| inch| mm| μm| | IP
141085113| 0-150| 0-6”| 0,005| ±20| Digit height 9mm| IP-67
141085213| 0-200| 0-8”| ±20| IP-67
141085313| 0-300| 0-12”| ±30| IP-67
*MAX ERROR FOR INTERNAL END DEPTH MEASUREMENTS DIN-862
BUTTON FUNCTIONS
CORRECT MEASURINGS
OPERATION INSTRUCTIONS
Wipe with a clean cloth, soaked in gasoline, measuring surface of the frame and gauge calipers to remove anti-corrosion oil. Then wipe them with a clean dry cloth.
If necessary, open the battery cover; insert the battery (type CR2032) according to the polarity of the electrodes. Blinking display information or absence suggests replacing battery.
This caliper has Autos itch on/ off function:
- move electronic module for switch on caliper
- after 10 minutes without any moving caliper will switch off
During the measurement, measuring jaws should to sum to the measured object
without knocking.
During the measurement avoid warps of measuring surfaces of the instrument.
Measuring surface must be fully in contact with the measurement object.
WARNING!
IN THE PROCESS OF WORKING WITH CALIPERS SHOULD BE AVOIDED:
Scratches on the measuring surfaces;
Measuring the size of object in the process of machining;
Shocks or dropping, avoid bending of rod or other surfaces.
INSTRUMENT FIGURE
Item No
| DIMENSIONS| Display
---|---|---
A| B| C| D| E|
F
|
mm
| mm| mm| mm| mm| mm|
141085113| 235| 40| 10| 16| 16|
4×1,4
|
Digit height 9mm
141085213
| 290| 50| 10| 18| 16| 4×1,4
141085313| 395| 60| 11| 21| 16|
4×1,4
FUNCTIONS
IP67 electronics
Hand finished surfaces
cr2032 3v battery
mm/inch
HOLD function
Position memorized
Auto wake up & switch off
OPTIONAL ACCESSORIES
Change without prior notice
| 
---|---
