timberk T-SD400T05 Shoes Dryer Instruction Manual
- June 13, 2024
- TIMBERK
Table of Contents
INSTRUCTION MANUAL
T-SD400T05
IM2021
T-SD400T05 Shoes Dryer
Dear customer!
We thank you for the good choice and for a purchase of an electric shoes
dryer, developed and produced by our company.
IMPORTANT INFORMATION
The manufacturer reserves the right to make minor changes to the design of the product without additional notice that do not fundamentally affect its safety, performance and functionality. There may be some misprints in text and digital notations in the present manual. In case after reading of this manual you have any questions concerning work and operation of the appliance, please, refer to a shop assistant or to a specialized service center for further explanations. The device has a label with all the needed technical data and other useful information about the appliance. Use the appliance only for its intended purposes indicated in this manual.
SAFEGUARDS
Improper operation by ignoring safety precautions can result in damage to the health of the user and other people, as well as damage to their property.
- Please read these operating instructions carefully before connecting your device to the power supply, in order to avoid damage due to incorrect use.
- Before the first switching on check that voltage indicated on the rating label corresponds to the mains voltage in your home.
- The appliance is intended for use only in domestic aims. The unit is not intended for industrial and commercial use.
- Do not use outdoors or in high humidity conditions.
- Always unplug the appliance from the power supply when not in use.
- To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids.
- The appliance is not intended for use for physically, sensory or mental disabled person (including children) or for person with lack of life experience or knowledge, if only they are under supervision or have been instructed about the use of the unit by responsible person.
- Children must be under control in order not to be allowed to play with the appliance.
- Do not leave the appliance unattended when in use.
- In case of power cord is damaged, its replacement should be done by the manufacture or service department or the other high-skill person to avoid any danger.
- Never try to repair this appliance by yourself. In case of failure, contact the nearest seller.
- Ensure that the cord does not hang over sharp edges and keep it away from hot surfaces.
- Any objects or a liquids are not allowed in holes on the product.
- The speed of shoes drying depends on product’s use conditions, humidity and season of year.
- When the power is on, the light indicator light will turn on and the dryer body will heat up, which is correct one.
- Do not disassemble the device to avoid damage or breakage.
- Please keep the device at 10 cm or more distance from other objects for air access and avoid device breaking or damaging
- Moisture evaporation is a normal phenomenon during the drying process.
- The product has a low power, so it will not damage itself and will not harm the environment, even if connected to the electrical network for a long time.
- This product is suitable for wet or slightly wet, but not completely wet shoes, as well as for socks previously dried in the washing machine
- During shoes and socks drying, an unpleasant smell may occur. Keep your shoes and shoe dryer in a well-ventilated place.
- Please try to hang the products while drying to achieve the best result.
- Do not place the turned on shoe dryer on the carpet or any fabric.
- Do not touch the shoe dryer after the drying process is just over to avoid burning.
- If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for at least 2 hours before turning it on
- Manufacturing date is indicated on the unit and/or on packing as well as in accompanying documents in the following format XX.XXXX where first two figures XX is the month of production, and following four figures XXXX is the year of production.
APPOINTMENT OF THE DEVICE
- The device is designed for shoes drying
TECHNICAL PARAMETERS
Technical characteristics
Technical characteristics of the device are shown in the table below:
| Model name | T-SD400T05 |
|---|---|
| Power | 20 W |
| Device dimensions | 29× 170× 71 mm |
| Electrical protection class | II |
DEVICE DESCRIPTION
- Timer with control button
- Body
- Holes for steady drying
- Power cord
*The appearance of the device may differ from the images in the manual
OPERATION OF THE DEVICE
- Put the appliance in your shoes and connect it to the mains. The body is automatically heated to 65-80 °C temperature which is safe for shoes
- Wait until the shoes become dry
- Disconnect the device from the power supply.
- Remove the device from the shoe.
Timer function
- This appliance is equipped with a timer to turn off after 3, 6, 9 hours of operation.
- To activate the timer, press the button one/two/three times, respectively – the indicator of the selected time will light up.
CLEANING AND MAINTENANCE
- Disconnect the appliance from the power socket and make sure that the appliance is completely cooled down
- Remove the dryer from the shoes
- Wipe the body with a damp cloth. Do not use abrasive or chemical cleaning agents.
STORAGE
- Switch off and unplug the appliance; let it entirely cool.
- Complete all requirements of Chapter CLEANING AND CARE.
- The cord can be wrapped around the base area for storage.
- Keep the appliance in a dry cool place.
UTILIZATION RULES
**** The symbol on the unit, packing materials and/or documentations means
used electrical and electronic units should not be toss in the garbage with
ordinary household garbage. These units should be pass to special receiving
point.
For additional information about actual system of the garbage collection
address to the local authority.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>