OSMO X21 TopCutter 5 Head Shavers User Manual

X21 TopCutter 5 Head Shavers
User Manual TopCutter
User Manual
If you want to read this user manual in a different language, visit osmousermanual.com

Information

Product brief introduction

(a) Shaver. (b) Charger (c) Comb (d) precision-trimmer (e)enfeosreenhacier trimmer cover (f) nose &ear trimmer (g) soft face sponge (h) facial cleaning brush
Notes Before using the product please read carefully the operating and keep properly for future references.

1. Only the included charger can be used.

2. The charger can transform 220V to a safe low voltage 2.4V.

3. The charger includes a transformer which should not be cut off and replaced with another plug otherwise it will lead to serious results.

4. If the charger is damaged it should be replaced with a new one with original type to avoid damage.

5. The three blades are made of super thin alloy. To avoid breakage please do not press it by hand (Fig 1).

6. The temperature for the product’s charger and storage should not exceed 5’C – 35’C.

7. Make sure the charger cannot be rinsed under water. (Fig 2)
   

8. Unplug the charger before cleaning the shaver with running water. (Fig 3)

9. The waterproof grade IPX7

10. This product cannot be used by physical distempered, sensorially or mentally disordered, or inexperienced persons (including children) unless they are under supervision or instruction by people in charge of their security. 11.Take care of children to keep them away from this product.

11. PlReeafseercelneacneinside beard if the shaver doesn’t work after you press the switch.

12. When the shaver is charging, the indicator light is red, when you see 60; that means it’s fully charged.

13. It is necessary to ensure you put protective cover on the shaver when you travel, to protect the shaver head.

Charge

Make sure the product is power-off before charging. Fast charge for 1hour. Keep use about 60minutes after full charge. (Fig 4) It’s better for the product not to be connected to the power supply for more than 24hrs.

1.  Insert the product charger into the shaver. (Fig 5)
   

2. Plugin the charger.

3. The charger indicator lights up (Fig 6)

4. After the full charge, unplug the charger and also pull out the product’s plug from the shaver.

5. It can charge with the charging base.

How to Use Product

Shaving

1. Press the button ON/OFF to start the shaver
2. Make the shaver head part move quickly on the skin in straight lines and circles (Fig 7).
   

To ensure a better shaving effect, the shaver must be cleaned regularly. The easiest and must sanitary way to clean the product is to wash the shaver head part and the whisker storeroom, each time and after using it..

1. Stop the shaver (Fig 9)
   

2. Pull away the shaver heads on the side, one by
   one and then rotate and pull out the middle head in the arrow direction indicated on it.

3. Clean the shaver head part and the hair storeroom for sometime with running water. (Fig 10)
   Make sure the inside of both the shaver and the hair storeroom has been cleaned thoroughly.

4. Wash the product’s surface.

5. Close the shaver head part and throw off surplus water.

Do not wipe the shaver head part with a towel or paper tissue, which may cause damages to the shaver head.
Open the shaver head part again and remain so to dry up the product. (Fig 12). You can also use the brush included to clean the hair storeroom.
Change the shaver head once a year to get the best shaving effect. The shaver has a long service life if not damaged for human factors. The damaged shaver head can only be replaced with shaver head of this company.

1. Pull the old shaver head assembly out of the shaver. (drawing) (Fig 13).

2. Insert the new shaver head assembly inside the groove (1) on the shavers top and then press down the shaver head assembly (2) to mount it on the shaver (a click will be heard). (Fig 14)

Precision Trimmer Instructions

Turn of the shaver power, remove the shaver head. Insert the hair clipper into the slot of the top shaver. Press down the hair clipper head part to install the shaver body. (hear the sound like “kaca”) (Fig 15)
TRIMMER
Note : Make sure your hair is clean and dry. Do not use the product for wet hair.

1. Ensure that you comb your hair according to hair growth direction before clip hair.

2. Put on the comb accessories to the slot both sides till you hear the sound, make sure the comb accessories have already fixed on both sides. (Fig 16)
   

3. The comb accessories have two length “3MM and 6MM” for clip hair with different length. Replacing the comb accessories directions according to length mark in the bottom. (Fig 17).
   Put down the comb accessories from one side slot to another. (Fig 18).
   

4. Open the switch, use it above the hair slowly. For good clip effect, please use the product in a different direction from hair growth direction.

Cleanness / Lubricate

1. Take out the precision trimmer head, use brush to clean the trimmer or clipper, or wash the trimmer head.
2. Do not use abrasive alcohol, gasoline or acetone etc. liquid to wash the product.
3. You should clean the product immediately after using once.
4. For best using and clean effect please add some lubricating oil every three months. The lubricate oil isn’t included in this package. You need to. purchase it yourself.

Nose Trimmer Instruction

Turn off the shaver power, remove the shaver head, insert the nose trimmer into the slot of the top shaver. Then press down the nose trimmer head to installed in the shaver body. (hear a sound like “kaca”) (Fig 20)

Trim Nose Hair

1. Make sure your nose is clean.
2. Open the switch, put the nose trimmer towards your inside nose, turn the nose trimmer to clip your long nose hair (Fig 21).
   Do not exceed 0.5cm for nose trimmer length inside your nose. To reduce the itch, you should put one side of the nose trimmer tip close to your skin.

Clip Ear hair

1. Clean outside ear, make sure no earwax. 2. Open the switch, then turn the trimmer tip towards your ear to clip your long hair. 3. Put the trimmer tip towards your outside ear lap slowly. (Fig 22). Do not exceed 0.5cm for trimmer tip length inside your ear.
   

SOFT FACE SPONGE

With cleansing brush, you can wash your face softly and clean.
Trimming
Used for trimming temple and moustache.

1. Push the slides face upwards to open the hair trimmer, which can be started as the shaver start. (Fig 23)
   

Using the cleansing brush attachment
Use the rotating brush attachment with your daily cleansing cream. The cleansing brush attachment removes oil and dirt, contributing the healthy and oil-free-skin.

1. Make sure the appliance is switched off and attach the cleansing brush attachment to the appliance (fig 24).

2. Moisten the attachment with water. Do not the appliance with a dry brush head, as this can irritate the skin.

Note: soft face sponge and facial cleansing brush are using the same base. (Fig 25-1-2)
Tip: Use the attachment before shaving for easier shaving and a more hygienic shaving result.

1. Moisten your face with water and apply a cleanser to your face.
2. Place the attachment on your right cheek. (Fig 26)
3. Switch on the appliance.
4. Gently move the attachment across your skin from the nose towards the ear. Do not brush the attachment too hard onto your skin to make sure the treatment remains comfortable.
5. After approximately 20 seconds you can move the attachment to your left cheek and this part of your face.

Caution: do not clean the sensitive area around your eyes.

1. After approximately 20 seconds you can move the attachment to your forehead and start cleansing this part of your face. Gently move the attachment from left to right.

Note: we advice that you not overdo the cleansing and not cleanse any area longer than 20 seconds.

1. After the treatment, rinse and dry your face. Your face is now ready for the next step of your daily routine.
2. Clean the attachment after use (See Chapter Cleansing and maintaining)

Accessories

The following accessories are included with the product; charger, brush.

Environmental Protection

1. To discard the product, please do not put it together with general domestic rubbish heaps but hand it to the official recycle center for environmental protection. (Fig 27)
2. The built in rechargeable battery contains substances which may pollute the environment, so it must be unloaded from the product or sent to the officially designated recycle center to be disposed before it’s discarded.

The battery should not be unloaded unless it’s been used up.

1. Unplug the charger and also pull out the product plug from the shaver.
2. Unload the battery. Do not plug in the shaver again after unloading the battery.

If you want to read this user manual in a different language, go to osmousermanual.com
Have any questions or need further assistance?
Send us an email at support@osmo-official.net and we will be happy to help!

References

• official.net - This website is for sale! - Official Resources and Information.
• osmousermanual.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>