beamZ 141158 Mini Star Ball DMX LED 9 Colours Instruction Manual
- June 13, 2024
- beamZ
Table of Contents
beamZ 141158 Mini Star Ball DMX LED 9 Colours
MOUNTING
The mounting place must be of sufficient stability and be able to support a weight of 10 times of the unit’s weight. Secure the unit with a safety cable so that it cannot fall down.
DMX512 CONTROL
If you are using a standard DMX controller, you can connect the DMX output of the controller directly to the DMX input of the first unit in a DMX chain. Always connect the output of one unit with the input of the next unit until all units are connected.
CAUTION! At the last unit, you must close the DMX line with a terminating resistor. Take an XLR connector and solder a 120 Ohm resistor between signal (-) and signal (+) and connect it to the DMX output of the last unit in the line.
DOWNLOAD OUR FULL MANUAL IN MANY LANGUAGES VISIT >>> WWW.BEAMZLIGHTING.COM
REMOTE CONTROLLER
- Standby
- DMX mode ON / OFF
- Pause/Start auto program or sound program
- Sound program S1
- Sound program S2
- Sound program S3
- Strobe ON/ OFF
- Auto program, chose A1, A2, A3, A4, A5, A6, A7
- Increase or decrease speed
CAUTION! The remote control is supplied with a battery inserted. An insulating foil between the battery and the battery contacts prevents the battery from being discharged during storage. Prior to the first operation remove the foil from the battery support on the rear side of the remote control. Otherwise operation of the remote control is not possible.
For operation, one 3 V button cell type CR 2025 is required. When inserting, pay attention that the positive pole of the button cell shows upwards in the support.
CONTROL MENU
| MENU | DESCRIPTION |
|---|---|
| A001 | DMX address setting |
| A1 X | Red + Purple+ Warm White mode |
| A2 X | Green + Blue + Pink mode |
| A3 X | Yellow + White + Orange mode |
| A4 X | All colours, speed slow to fast |
| A5 X | 3 Colours jumping effect, speed slow to fast |
| A6 X | 9 Colours jumping effect, speed slow to fast |
| A7 X | 9 Colours gradually effect, speed slow to fast |
| A8 X | Strobe |
| S1 X | Sound control mode 1, light reacts on the sound, motor runs continuously |
| S2 X | Sound control mode 2, colour change, motor speed fast |
| S3 X | Sound control mode 3, colour change, motor speed slow |
DMX CHANNELS
| CHANNEL | FUNCTION | VALUE | DESCRIPTION |
|---|---|---|---|
| 1 | Master dimmer | 000-255 | Total brightness gradually from darkness to |
brightness
2| Colour| 000-255| Red + Purple + Warm White led dimming, from 0-100%
3| | 000-255| Green + Blue + Magenta led dimming, from 0-100 %
4| | 000-255| White + Yellow + Orange led dimming, from 0-100 %
5| Strobe| 000-009| No function
| | 010-255| Strobe flash, from slow to fast
6| Motor| 000-005| Stop
| | 006-127| Random speed
| | 128-255| Speed, from slow to fast
7| Program| 000-009| Auto colour program
| | 010-072| Auto colour gradually change
| | 073-134| Auto colour jump changes
| | 135-197| RGB jump changes
| | 198-220| Sound control mode 1
| | 221-250| Sound control mode 2
| | 251-255| Sound control mode 3
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>