SOAR B0CC1JZFX5 Children Electronic Toy ATV Wheeler Electric Quad Vehicle Owner’s Manual

**SOAR B0CC1JZFX5 Children Electronic Toy ATV Wheeler Electric Quad Vehicle Owner’s Manual

**

WARNNING
Must be assembled by an adult.

• Suitable for 3+ Years.
• Maximum user weight: 30 kg

Assembly Instructions

• Read and understand this entire manual before using!
• Please keep this manual for future reference as it contains important information.
• Before first time use, charge the battery for at least 8-12 hours.

About Your New Vehicle

On the purchase of your new Ride-On.
This ride-on car will provide your child with many miles of riding of enjoyment.

To help assure
you and your rider a safe ride we ask you to please read this manual carefully, and keep it for future reference.

Follow the recommendations in this manual, they are designed to improve the safety and operation of your ride-on car and its rider.

Specification

| 2WD| 2WD| 2WD| 2WD| 4WD
---|---|---|---|---|---
Battery| 12V4.5AH1| 12V4.5AH2| 12V7AH1| 12V7AH1| 12V7AH*1
Charger| 12V1000mA| 24V500mA| 12V1000mA| 12V1000mA| 12V1000mA
input| Depend on local voltage
Motor| 390-16000| 550-12000| 390-16000| 550-10000| 390-16000

• Suitable age: 3+ Years
• Charge time: 8~12 hours
• Load capacity: Under 30 kg
• Size of car: 98X63X62CM
• Speed: 3-7 km/h

BATTERY INFORMATION

• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the toy before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Different types of batteries or new and used batteries are not to be mixed.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.

Parts List

Parts Diagram

HINT: Some parts shown are assembled on both sides of vehicle )

Safety

PREVENT INJURIES AND DEATHS:

• NEVER LEAVE CHILD UNA TTENDED. ADULT DIRECT SUPERVISION IS REQUIRED. Always keep child in view when child is in vehicle.
• This toy should be used with caution since skill is required to avoid falls or collisions causing injury to the user or third parties.
• Protective equipment should be worn.
• Never use in roadways, near cars, or on near steep inclines or steps, swimming pools or other bodies of water.
• Always wear shoes, always sit on the seat.
• Not to be used in traffic.
• This toy is unsuitable for children under 36 months due to its maximum speed; Maximum user weight is 30 kgs.
• This toy has no brake.

WARNING

• CHOKING HAZARD! Not suitable for children under 36 months.
• Must be assembled by an adult.

Rules for Safe Riding

• Keep Children within Safe Riding Areas:
  • Never use in roadway, near motor vehicles, on lawn space, on or near steep inclines or steps, swimming pools or other bodies of water;
• Use the toy only on flat surfaces. Such as inside your house, garden or playground.
• Never use in the dark. A child could encounter unexpected obstacles and have an accident. Operate the vehicle only in the daytime or a well-lit area.
• It is prohibited to change the circuit or add other electric parts
• Inspect wires and connections of the vehicle periodically.
• Do not let any child touch the wheels or be near them when the car is moving .

Install steering shaft and bracket

Turn the body over and insert the steering rod into the body

Place the iron plate on the steering bracket.

Assemble the steering bracket with M5x12 machine screw and 5 Lock nut. 5 place the bracket on the body and fix it with M4x12 screw.

Attach the Front Wheels

1. Slide a $12 washer onto the front axle.
2. Slide a wheel onto the front axle.
3. Slide a 10 washer onto the front axle.
4. Tighen a lock nut to the end of the front axle with a spanner. DO NOT over tighten.
5. Put the wheel cover over the wheel.

Install rear wheels and anti-roll racks

1. Insert the rear axle into the body.
2. Insert the drive motor into the rear axle, Plug the connector on the motor in the connector on the vehicle body.
3. Slide a wheel onto the rear axle. Ensure the wheel match up with the gear box.
4. Slide another 10 washer onto the rear axle.
5. Tighten a lock nut to the end of the rear axle with a spanner. Repeat the above procedure to assemble the other rear wheel to the rear axle.
6. Insert the tabs on the wheel cover into the grooves on the wheel.
7. Install the roll guard on the body.
8. Secure the roll proof rack with M4x10 screw

Install handlebars and windshield

1. Fit the steering wheel to the end of the steering column.
2. Line up the holes on the steering wheel with the holes on the steering column, insert the M5x33 machine screw. Fasten a nut on the opposite end of the screw. Using a long nose pliers to hold the nut while tightening the screw on the other side with a screwdriver.
3. Attach the windshield to the body of the car.

Attach the Rea gage Carrier

1. Fit the rear luggage carrier assembly over the rear of vehcile body.
2. Insert three M4x12 screws through the luggage carrier and into the vehicle body, tighten with a screwdriver screwdriver.

Connect the Power Supply & Attacl e Seat

1. Open the seat.
2. Plug the battery connector into the red vehicle connector as shown.
3. Fit the tabs on seat into the grooves on the vehicle.
4. Tighten a M4X10 screw to secure the seat to the vehicle body.

Use your New Ride:

1. Power button: Turn the power on and off.

2. Forward-reverse switch: Changes the direction that vehicle moves from forward to reverse.

   • To move the vehicle forward, shift the lever to top position.
   • To move the vehicle reverse, shift the lever to down position
     HINT: The vehicle is designed to operate in low speed only in reverse.

3. High-low speed switch: Changes the vehicle moves in high speed and low speed in forward

4. 2W/4W switch (if equipped): Operates the vehicle to 2WD mode and 4WD mode.

5. Foot pedal:

   • To move the vehicle, press the pedal down.
   • To brake or slow down, release pressure from the pedal.

6. Lights switch: Turn the front lights on and off.

7. Display screen:

A. Previous /decrease volume
B. Play / Pause
C. Next / Increase volume
D. Change the audio input.
E. Display screen: It displays the power level of the battery when the vehicle stops. When the numerical value is less than 12, recharge the battery please

Charging

WARNING

ONLY AN ADULT CAN CHARGE AND RECHARGE THE BATTERY!

WARNING

This product with Charging Protection: when charging, all functions will be cut off! Only an adult can charge and recharge the battery!

• The POWER SWITCH must be turned in OFF position when charging.
• Before the first use, you should charge the battery for8-12hours. Do not recharge the battery for more than 12 hours to avoid overheating the charger.
• When the vehicle begins to run slowly, recharge the battery.

1. Plug the charger port into the input socket.
2. Plug the charger plug into a wall outlet. The battery will begin charging.

firmly plugged into each other. If wires are loose around the motor contact your distributor pleas
Electrical system is damaged| Contact your distributor please.
Electrical system is damaged Motor is damaged| Contact your distributor please
Vehicle does not run very long| Battery is under charged| Check that the battery connectors are firmly plugged into each other when recharging
Battery is old| Replace battery, contact your distributor please.
Vehicle runs sluggishly| Battery low on power| Recharge battery, contact your distributor please.
Battery is old| Replace battery, contact your distributor please.
Vehicle is overload| Reduce weight on vehicle. Maximum user weight is 30 kg.
Vehicle is being used in harsh conditions| Avoid using vehicle in harsh conditions, see
Vehicle needs a push to go forward| Poor contact of wires or Connectors| Check that the battery connectors are firmly plugged into each other. If wires are loose around the motor, contact your distributor please.
“Dead Spot” on motor| A dead spot means the electric power is not being delivered to the terminal connection and the vehicle needs repair. Contact your distributor please.
Difficult shifting from forward to reverse or vice-versa| Attempting to shift while the vehicle is motion| Completely stop the vehicle and shift, see <Use Your New Vehicle
Loud grinding or clicking noises coming from motor or gear box| Motor or gears are damaged| Contact your distributor please.
Battery will not recharge| Battery connector or adapter connector is loose| Check that the battery connectors are firmly plugged into each other.
Charger not plugged in| Check that the battery charger is plugged into a working wall outlet.
Charger is not working| Contact your distributor please.
Charger feels warm when recharging| This is normal and not a cause for concern|
Completely read through this manual and the troubleshooting guide table before calling. If you still need help resolving the problem Contact your distributor please.

Maintaining

• It is parents’ responsibility to check main parts of the toy before using, must regularly examine for potential hazard, such as the battery, charge, cable or cord, plug, screws are fastening enclosure of other parts and that in the event of such damage, the toy must not be used until that damage had been properly removed.
• Make sure the plastic parts of the vehicle are not cracked or broken.
• Occasionally use a lightweight oil to lubricate moving parts such as wheels.
• Park the vehicle indoors or cover it with a tarp to protect it from wet weather.
• Keep the vehicle away from sources of heat, such as stoves and heaters. Plastic parts may melt.
• Recharge the battery after each use. Only an adult can handle the battery. Recharge the battery at least once a month when the vehicle Raider is not being used.
• Do not wash the vehicle with a hose. Do not wash the vehicle with soap and water. Do not drive the vehicle in rainy or snowy weather. Water will damage the motor, electric system and battery.
• Clean the vehicle with a soft, dry cloth. To restore shine to plastic parts, use a non-wax furniture polish. Do not use car wax. Do not use abrasive cleaners.
• Do not drive the vehicle in loose dirt, sand or fine gravel which could damage the moving parts, motors or the electric system. When not using, all the electrical source should be turn off. Turn off the power switch and disconnect the battery connection.

Fuse

The battery features a thermal fuse with a rest fuse that will automatically trip and cut all power to the vehicle if the motor, electric system or battery is overloaded. The fuse will reset and power will be restored after the unit is turned OFF for 20 seconds and then turned ON again. If the thermal fuse trips repeatedly during normal use, the vehicle may need repair. Contact your distributor please.

To avoid losing power, follow these guidelines:

• Do not overload the vehicle.
• Do not tow anything behind the vehicle.
• Do not drive up steep slopes.
• Do not drive into fixed objects, which may cause the wheels to spin, causing the motor to overheat.
• Do not drive in very hot weather, components may overheat.
• Do not allow water or other liquids to come in contact with the battery or other electric components.
• Do not tamper with the electric system. Doing so may create a short, causing the fuse to trip.

Disposal Of Battery

• Your sealed lead-acid battery must be recycled or disposed of in an environmentally sound manner.
• Do not dispose of your lead-acid battery in a fire. The battery may explode or leak.
• Do not dispose of a lead-acid battery in your regular, household trash. The incineration, land filling or mixing of sealed lead-acid batteries with household trash is prohibited by law.

soarservice@Qoutlook.com

Our products are suitable for ASTM F963; GB6675; EN71 and EN62115 standard.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>