BALANCE B0CCRX8VDD 3-in-1 Wireless Charging Station User Manual
- June 13, 2024
- BALANCE
Table of Contents
BALANCE B0CCRX8VDD 3-in-1 Wireless Charging Station
What’s in the box
- BALANCE 3-in-1 Wireless Charger *1
- 30W QC Power Adapter *1
- USB-C to USB-A cable *1
- User Manual *1
Product Overview
Compatibility
Phones
- iPhone 14/Pro/ProMax/Plus / 13/Pro/ ProMax/mini 12/Pro/ProMax /mini / 11/Pro/ProMax / SE(2) XS /XS Max/XR / X / 8/ 8Plus
- Galaxy S22/S22 Ultra/S21/S20/S10/S10 Plus/S10E/S9/S9 Plus/Note 9/S8/S8 Plus/
- Note 8/S7 Edge/S7/S6 Edge plus/Note 5
- Google Pixel 6/6XL/5/5XL/4/4 XL/3/3 XL LG V60 / V50 / V40 / V35 /V30+ /V30/G8
Wireless Earbuds
- Wirless Earbuds
- AirPods Pro (1/2)
- AirPods (3)
- AirPods With Wirless Charger
- Galaxy Buds, Buds2,
- Buds Live, Buds Pro
- Soundcore Liberty
- Air2 /Air2 Pro/2 Pro
AppleWatch
- Apple Watch Series (1-8)
- Apple Watch SE
- Apple Watch Ultra
Attention
- Please do not place any debris between your smartphone and the wireless charger, such as credit cards, keys, coins, rings, NFC cards, etc.
- Use only original power adapters and cables.
- Cases with a thickness exceeding 5mm, metal cases, and cases with uneven surfaces cannot be used.
- Do not place the wireless charger in direct sunlight or near hot objects.
- Do not get wet.
- Do not use in temperatures below 0°C or above 40°C.
Techniacal Parameters
Wireless Charger| | Power Adapter|
---|---|---|---
Input| 5V ⎓ 3A 9V ⎓ 3A 12V ⎓ 2.5A| Adapter
Model| PA30- US|
| | | Input| 100-240V~50/60Hz 0.9A MAX|
Output| 15W+15W+2.5W|
Output| 5V ⎓ 3A 9V ⎓ 3A 12V ⎓ 2.5A|
Connecting
-
1.Insert the USB-C plug into the input port.
-
2.Insert the USB-A plug into the
power adapter. -
3. Connect the power adapter to an outlet.
LED Indicator
- When the Magnetic Charging pad or non-magnetic charging pad is working, the white indicator light is on, and it turns off after 3 minutes.
- When the charging is abnormal, or a metal object is placed on the wireless charging, the white indicator light flashes.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Warning:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance between 20cm the radiator your body.
FCC ID： 2AXAXW328
- Model: W328
- Manufacturer: LONGCONN ELECTRONICS (SHENZHEN) CO LTD
- Made in China