BRISTAN RD C Round Soap Dish User Guide
- June 5, 2024
- BRISTAN
Table of Contents
BRISTAN RD C Round Soap Dish
Models Covered:
- RD DISH
- RD HOOK
- RD ROLL
- RD RING
- RD RAIL
- RD SHELF
Installation
Single Backplate Fitting
- Establish the position for the accessory and mark out the fixing holes. (Fig.1)
- Drill holes to suit and insert wall plugs if required.
- Screw the fixing plate to the wall, with the back flat to the wall. (Fig.2)
- Loosen off the grub screw (but do not remove) and place the accessory over the fixing plate with the grub screw at the bottom.
- Tighten up the grup screw until the pillar is secure against the wall.
NOTE: All centres should be measured and checked prior to drilling
Double Backplate Fitting
- Establish the position for the accessory and mark out the fixing holes; it is recommended that the centre distance of the accessory assembly is checked prior to drilling.Drill holes to suit and insert wall plugs if required.
- Drill holes to suit and insert wall plugs if required.
- Screw the fixing plate to the wall, with the back flat to the wall. (Fig.2)
- Loosen off the grub screw, but do not remove.
Towel Rail
- Fit the towel rail to the end pillars and place them over the fixing plate with the grub screws at the bottom.
- Tighten the grub screws untill the pillars are secure against the wall.
Shelf
- Fit shelf into the brackets and secure in position by tightening the plastic screws in the pillars.
- Check shelf for security.
Extending Mirror
- Establish the position for the mirror and mark out the fixing holes.
- Drill holes to suit and insert wall plugs if required.
- Screw the fixing plate to the wall, with the back flat to the wall. (Fig.2)
- Loosen off the grub screw (but do not remove) and place the accessory over the fixing plate with the grub screw at the bottom.
- Tighten up the grup screws until the pillar is secure against the wall.
- Screw mirror down onto the extending bracket and check for security.
NOTE:
Depending on your accessory, the shape of the backplate (where supplied) may
vary.
Wire Baskets
- Establish the position for the mirror and mark out the fixing holes.
- Check the pos tion of the marked holes before drilling.
- Drill holes to suit and insert wall plugs if required. Screw the fixing plate to the wall, with the back flat to the wall. (Fig.2)
- Ensure that the brass threaded washers provided, sit between the accessory and the screw head, fit screws accordingly, see (Fig.3)
- Fit concealing caps over the screw heads and check basket for security.
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
BRISTAN
Bristan Group Ltd. Birch Coppice Business Park Dardon Tamworth Staffordshire
B781SG
Web: www.bristan.com
Email: enquire@bristan.com
A Masco Company
To start Alternatively your free visit guarantee www.bristan.com/register.
simply scan the QR code and register your product.
will For be any able other to offer queries, you please any help call and our
advice. Customer Service on 0330 026 6273 where our expert team of advisors
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>