Newell Air Artha XL RGB RC APP LED Light Instruction Manual

: June 13, 2024
: Newell

Table of Contents

SAFETY INSTRUCTIONS
PRODUCT DESCRIPTION
POWER ON/OFF
REMOTE CONTROL
APP OPERATION GUIDE
PRODUCT SIZE
SPECIFICATION
WASTE MANAGEMENT
WARRANTY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LED Lamp
Air Artha XL RGB APP
Instruction Manual

SAFETY INSTRUCTIONS

Before using the product, please read the following instruction manual carefully and keep it for future reference. When transferring the product to a third party, it is advisable to include the instructions.
The lamp Is a precision device. Do not drop, hit crush or expose to any shock.
“The unit s not dustproof or waterproof. Store In a dry, cool and ventilated place. Do not expose to water of other sources of moisture.
Do not use near flammable materials and solvents.
Do not use the lamp too close to objects. Do not cover the ventlation holes. Do not insert metal parts into the lamp. Do not touch the electrical parts with conductive materials,
The lamp can operate in a temperature range of O°C – 35°C.
The lamp will heat up siighty, but it s normal.
Do not stare directly at the LED panel thatis turned on, it may cause eye damage.
Do not use the LED outside in direct sunlight or a long time.
Disconnect the power supply for storage or transportation.
Allow the it to cool down before placing itn the package. For use by aduls.
If you notice smoke or a strange smell coming from the device, immediately disconnect the. power. Do not disassemble. Disassembling the unit will void the warranty. If there are problems with the lamp, bring it to an authorized service center.
Maintenance
Use a dry and soft cloth to clean the unit. Do not clean with water. A little neutral detergent on the, cloth to remove stubborn dirt. Do not use strong detergents such as thinner, benzine or alcohol as they may damage the protective coatings.

PRODUCT DESCRIPTION

Newell Air Artha XL RGB RC APP LED Light - fig 1

Lamp panel
Angle ajustment knob.
U-shaped Bracket
Battery removal buton
Fixing the bracket
Battery removal buton
Battery Release
SET function knob
LCD display| 10. MODE button
11. Fal button
12. Fn2 button
13. Fn3 button
14. Fnd button
15. Power switch
16. DC input socket
17. Remote control
---|---

POWER ON/OFF

Newell Air Artha XL RGB RC APP LED Light - fig 2

Number	Button	Description
1	MODE	Mode selection: White light (CCT), Color light (HSI), Scenes (SCENE)
2	Fn1	Function key Fn1; press it to enter the menu and choose brightness

Function description
A Artha XL RGE light has three modes: CCT, HSl, SCENES.
CCT mode
After the product is turned on, it can be cycled through the MODE button (CCT ->HS1 > SCENE) Brightness adjustment -> Press the Fn1 key to select the brightness parameter in the screen and then adjust the brightness through the SET function rotary knob.
Color temperature adjustment -> Press the Fn3 key to select the color temperature parameter in the screen and then adjust the color temperature through the SET function rotary knob.
2. Hsl mode
Brightness adjustment -> Press the Fn1 key to select the brightness parameter in the screen and then adjust the brightness through the SET function rotary knob.
Hue adjustment > Press the Fn3 key 1o select the hue parameter in the screen and then adjust the hue through the SET function rotary knob.
3. SCENE mode
Brightness adjustment -> Press the Fn1 key to select the brightness parameter in the screen and then adjust the brightness through the SET function rotary knob.
Scene adjustment -> Press the Fn3 key to select the scene parameter in the screen and then use the SET function rotary knob to adjust different effects.
In each of mode you can change also group and channel,
Group adjustment -> Press the Fn2 key select to select the Gr parameter on the screen and then use the SET function rotary knob to adjust the Gr group (group A-C).
Channel adjustment > Press the Fn2 key to select the parameters on the screen and then use the SET function rotary knob to adjust the channel value (chi- ch40),

REMOTE CONTROL

Description of the remote control Newell Air Artha XL RGB RC APP LED Light -
fig 3 Remote control operation instructions

Switch machine:
Inserttwo AAA bateries into the bafery compartment according to the posiive and negaive signs in the: battery compartment. Short press the button on the remote control to tum on the remote control.Inthe Ppower-on state, long press buiton on the remote control to tum off the remote control,
Connect with the product:
– Press button on the remote control to enter the 2.4 parameter setting interface. Use the navigation keys to set the values of CH and GR to be consistent with the product Then the remote control can control the product remotely. In this menu, move the cursor to the GR parameter and press the FN key to control the product that is consistent with the currently displayed channel group to turn on or off. This function enables individual control of multiple products using one remote control, without exceeding the remote- control distance. The maximum number of independent control products is: 40 (CH) * (GR) units
Contorol:
When the remote control is connected to the product normally:

Press the FX button to enter the FX mode. In this mode, press the navigation key to switch between different preset effects
Pressthe CCT button to enter the CCT mode. Inthis mode, press the navigation bitton to adjust color temperature of the product
Pressthe HSI butonto enter the S| mode. In this mode, pess the navigation up and down keys to switch the RG color hue and saturation options. Press the navigation left and right 0 set the value of the current option.
Press the button in the shortcut key area to quicky set the product parameters 1o the parameters of colors marked on the buton. DIM + and buttons in all above modes, can control the decreasing andincreasing of rightness.

APP OPERATION GUIDE

Use your mobile phone to scan the unified download GR code corresponding to the picture above or search for RHD Light” app through Google Play (Android) or App Store (Apple iOS) to download.
Openthe app, you need 1o agree to all he necessary permissions and functon switches. fthe Biuetooth s not fured on, it wil prompt o tum on the: Bluetooth o scan and connectthe device, sefect OK”, to tum on the Bluetooth” or manually tum on the mobile phone Bluetooth.
The productstats normaly.https://www.zoqin.com/APP/QRCODE/RHDLight.php
As shown in pic 1, click *+” on the app to enter the .device scanning” interface to start scanning devices. After witing for about a few seconds, the Jbound device picture and deice name” as shown in pic 2 will be displayed. Click to display the pic 3 interface. Click picture 3 interface: the status: the figure 4 interface wil appear. Click the top right of picture 4 interface (GrA CH:f) to select group channel that s the same as the product lamp. By selecting different tabs on the top of the app. you can control and adjust the product in the corresponding interface under the app. Click .connected” in picture 3to slide to the left and picture 5 will appear
Click ,delete” n picture 5 to prompt o delete the bound device.
Note: click help on each interface of the app to display specific operation guide of the app.

“If N0 device is detected during tracing, please check whether the product s turned on and the Bluetooth of the mabile phone s tumed on.

PRODUCT SIZE

Unit: mmTolerance: + 1.0mm L=539.2 W=22.8 H=548.3

SPECIFICATION

LED light	5050 RGB 0.5W lamp beads 160pcs
Max Power	70W (± 2W)
Lighting parameter	Illumination: 1500 lux / 1m ± 150 lux

“The manufacturer reserves the right to change the information contained In this manual without prir notice.

WASTE MANAGEMENT

The crossed-out trashcan symbol means that waste electrical and _electronic _equipment, _batteries and packagings must not be placed with other household waste. Fhey must be handed over to a separate waste collection system.