Swann SWNHD-886MSD Thermal-Sensing Security Camera Instructional Manual

June 13, 2024
Swann

Swann-logo

Swann SWNHD-886MSD Thermal-Sensing Security Camera

Swann-SWNHD-886MSD-Thermal-Sensing-Security-Camera-
product

Introduction

Congratulations on the purchase of your Swann Thermal-Sensing Camera.

  • Enjoy day & night protection with the latest thermal-sensing security & have a bird’s eye view of your premises
  • See what’s happening during the night with in-frared cut filter & powerful LEDs
  • State-of-the-art True Detect PIR motion sensor is designed for security applications with the ability to reliably detect people, cars, large pets & other heat-generating large objects
  • With more accurate motion detection you have more reliable push notifications & activity-trig-gered recording, eliminating false triggers due to the wind, leaves falling, bugs, rain & more, saving you hard drive space & playback time

Important instructions

  1. Make sure the camera is fixed correctly and stable if fastened in place.
  2. Never place strain of any kind on the network ca-ble connection. It’s designed to clip into the Ethernet port, but it won’t support weight and can be broken.
  3. Do not operate if wires and terminals are exposed.

Important Note: All jurisdictions have specific laws and regulations relating to the use of cameras. Be-fore using any camera for any purpose, it is the buy-er’s responsibility to be aware of all applicable laws and regulations that limit the use of cameras.

About this Manual: The content in this manual is for information purposes only and is subject to change without notice. While every effort is made to ensure that this manual is accurate at the time of printing, no liability is assumed for any errors occurred.

Connecting the Camera

To connect the camera to your NVR, simply connect the supplied Ethernet cable to the LAN connection on the camera then plug the other end of the cable into one of the camera inputs on the back of your NVR.

Swann-SWNHD-886MSD-Thermal-Sensing-Security-Camera
\(1\)

Please note: The power connector is provided as an alternative power option if required. Your NVR will provide power over the Ethernet cable when connected and a separate power adapter is not required.

Mounting the Camera

The camera can be mounted onto a flat vertical or horizontal surface and must be of sufficient strength to hold the camera.

  • Hold the dome enclosure (1) and the dome ring (2) then rotate the mounting bracket (3) clockwise to remove it from the camera.
  • Position the camera bracket (4) in the location you want to mount it, and mark the mounting holes on the surface to position the screws (a mounting template has been included).
  • Using the appropriate screws for the surface you are mounting to, secure the bracket in place.
  • Run the cable then place the camera into the dome enclosure and dome ring and aim the camera to the desired position. The camera can be rotated left or right or up and down. Check the image on your DVR and make adjustments as necessary.
  • After you’ve finished adjusting the viewing position, rotate the dome ring to the mounting bracket counter clockwise to lock the position in place.

Camera Location Tips

  1. Take into consideration what you want to monitor and where you’ll get the best view of it.
  2. How you’re going to connect the camera to your monitoring system; remember that cables and connections should be kept out of the weather.
  3. How to keep the camera out of harm’s way. It’s recommended to mount your camera at an elevated position.
  4. Place your camera as close to the area of interest as practicable. The best position is from about 13ft/4m above looking slightly down, keeping in mind the details you are looking for.
  5. Although the sky looks nice when you look at the live view from your camera, it is an unlikely direction for an offender to approach. Make sure your camera has minimal sky in it as the light in daylight can make the foreground of the image darker.
  6.  Think about the most likely way a potential offender may approach your home, use your camera to give you the best coverage of these areas.
  7. The camera’s casing is resistant to different weather conditions and tampering. It would take an overwhelming event to damage the housing.
  8. Even though the camera is weather and water-resistant, prolonged exposure to adverse weather conditions such as sunlight or excessive moisture, may eventually damage the internal components of the camera and adversely affect its performance.
  9. Run cables inside a wall cavity or other protected enclosure, and ensure that all wiring and connectors are insulated and protected from moisture.
  10. Don’t put your cable near live electrical wiring. AC electricity generates radio “noise” which can interfere with the signal from your camera.

Warranty

Limited Warranty – Terms & Conditions

Swann Communications warrants this product against defects in workmanship and material for a period of one (1) year from its original purchase date. You must present your receipt as proof of purchase for warranty validation. Any unit which proves defective during the stated period will be repaired without charge for parts or labour or replaced at the sole discretion of Swann. The end user is responsible for all freight charges incurred to send the product to Swann’s repair centres. The end user is responsible for all shipping costs incurred when shipping from and to any country other than the country of origin.

The warranty does not cover any incidental, accidental or consequential damages arising from the use of or the inability to use this product. Any costs associated with the fitting or removal of this product by a tradesman or other person or any other costs associated with its use are the responsibility of the end user. This warranty applies to the original purchaser of the product only and is not transferable to any third party. Unauthorized end user or third party modifications to any component will render all warranties void. By law some countries do not allow limitations on certain exclusions in this warranty. Where applicable by local laws, regulations and legal rights will take precedence.

For Australia: Our goods come with guarantees which cannot be excluded under Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality.

FCC Verification

This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna
  • Increase the separation between the equipment and the receiver
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
  • Consult the dealer or an experienced radio/TV technician for help

These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. These devices may not cause harmful interference.
  2.  These devices must accept any interference received, including interference that may cause undesired op-eration.

Helpdesk & Resources

Visit Swann Support Center at support.swann.com. You can register your product for dedicated customer support, download guides, find answers to commonly asked questions, and more.

FAQs

What is the Swann SWNHD-886MSD Thermal-Sensing Security Camera designed for?

The Swann SWNHD-886MSD is a 4K Ultra HD security camera designed to work with a Swann Professional NVR System. It features True Detect PIR Thermal Sensing technology, which detects motion and heat from people and cars to trigger recording and push notifications.

What are the key features of the SWNHD-886MSD camera?

The camera offers 4K Ultra HD video quality, 93-degree viewing angle, night vision up to 150ft in total darkness, and weatherproof construction. It also includes True Detect technology for reliable motion detection and smart analytics for features like face detection and perimeter intrusion detection.

Can I use the SWNHD-886MSD camera both indoors and outdoors?

Yes, the camera is designed for both indoor and outdoor use. It has an IP66 weatherproof rating, making it suitable for various weather conditions.

What is the power source for the SWNHD-886MSD camera?

The camera is powered through Power over Ethernet (PoE) cabling, which allows power, video, and audio to run through a single Ethernet cable per camera.

What is the night vision range of the SWNHD-886MSD camera?

The camera provides night vision up to 150ft (45m) in total darkness and up to 200ft (60m) with ambient light, ensuring clear visibility day and night.

Does the camera come with a warranty?

Yes, the Swann SWNHD-886MSD camera is backed by a 1-year warranty for everything in the pack, including cameras and accessories. This warranty provides peace of mind regarding its performance and reliability.

Can the SWNHD-886MSD camera capture audio as well?

Yes, the camera features a built-in microphone for audio recording, adding an extra layer of valuable evidence to your surveillance system.

What type of Ethernet cable is included with the camera?

The camera comes with a 60ft Cat5e Ethernet cable for connecting the camera to the NVR.

Can I use the SWNHD-886MSD camera with an existing Swann Professional NVR System?

Yes, the SWNHD-886MSD camera is designed as an add-on for a Swann Professional NVR System, allowing you to expand your surveillance coverage.

Does the camera support advanced analytics like face detection and perimeter intrusion detection?

Yes, the camera includes advanced software analytics for features such as face detection, line crossing detection, perimeter intrusion detection, static object detection, person detection, and crossing counter.

Can I control and manage the SWNHD-886MSD camera remotely?

Yes, you can manage and monitor the camera remotely when it's connected to a Swann Professional NVR System. The system typically allows remote access and control through a smartphone or computer, providing convenience and flexibility.

What is the range of the camera's viewing angle?

The SWNHD-886MSD camera offers a super wide 93-degree field of view. This wide-angle coverage is suitable for large areas such as yards, driveways, parking lots, and more, reducing the need for multiple cameras.

Video- Product Information

Download This PDF Link: Swann SWNHD-886MSD Thermal-Sensing Security Camera Instructional Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals