Swann Security Android Apps User Guide
- June 6, 2024
- Swann
Table of Contents
Swann Security Android Apps
Swann Security
(Android)
Have a Smartphone or Tablet? With the Swann Security app, you can turn your
mobile device into a monitoring center for your DVR or NVR. Have the peace of
mind that you can monitor your home or business at any time from any place.
Best of all, it only takes minutes to get it up and running.
To download the app:
- Go to your app store and search for “Swann Security” or using your mobile device, scan the QR code below.
- Follow the on-screen instructions to install and accept any license requirements that may appear.
- After installing Swann Security, locate the app, and tap the icon to run.
You may need to download a QR code reader to your mobile device to scan this QR code.
For instructions on the functions available, access the User Manual within the app. You can also download this manual from our website support.swann.com, search for – Swann Security Manual.
Registering your Account
Welcome to Swann. Sign in or register.
If you have already registered an account with the app, sign in with your
Swann Se-curity credentials, then skip to step 7. For new users, tap “Sign
Up”. Proceed to step 2.
Let’s get started
Enter your first and last name, email ad-dress, and password. The password
has to be a minimum of six characters and must contain a mixture of numbers
and letters (use a password that you can remember). Enter your password again
to confirm. For safekeeping, write down your password. When finished, tap
“NEXT”. Proceed to step 3.
Is this where your devices are?
The app will ask if it can access your de-vice’s location, tap “Confirm” then
tap “Al-low only while using the app” (it does this so it can accurately
detect the location of your mobile and DVR or NVR). The app will detect your
address. If the ad-dress isn’t shown, tap the blue icon, input your address,
then tap “DONE”. When finished tap “NEXT”. Proceed to step 4.
Confirm your details.
Your name, email address, and device lo-cation will be shown here. Tap the
“Terms of Service” checkbox then tap “REGISTER”. Proceed to step 5.
Registering your Account
Stay secure.
You will receive an email asking to verify your email address. Go to the email
app on your mobile device or computer, open the email, and tap or click the
link to verify (if the email hasn’t been received, check your junk or spam
folder). Once verified, you will receive a welcome email confirming your
registration. When finished, tap “DONE”. Proceed to step 6.
You will be taken back to the sign-in page. Upon verification, enter your email address and account password then tap “SIGN IN”. Proceed to step 7.
After sign in, to pair your DVR or NVR to your account, you need to scan the
device’s QR code. Make sure that your DVR or NVR is connected to your router
so it has access to the internet. When ready, tap “Pair Device” then tap
“START”. Proceed to step 8.
Tap “ SCAN DEVICE QR CODE”. The app will ask if it can take pictures and record video, tap “Allow”. Scan the QR code sticker on top of your DVR or NVR with your mobile device. When the QR code has successfully scanned, pro-ceed to step 9.
Pairing your Device
Enter a device name for your DVR or NVR, “My DVR” for example, or tap on one of the relevant locations listed. When finished, tap “NEXT”. Proceed to step 10.
User name: The default user name for your DVR or NVR is admin, tap to
enter.
Password: Enter the password created during the Startup Wizard on your
DVR or NVR (there is no default password).
Port number : Leave the default setting (unless you are instructed to
change it by Swann Technical Support). When finished, tap “NEXT”. Your device
is now linked to your Swann Security account, tap “DONE” to finish.
Tap to open the Menu. From here you can edit your account profile, pair a new device, view notifications, read the user manual, and more.- Tap to toggle the layout of the camera (channel) tiles in the viewing area.
- Tap to disable offline cameras and to change the display order of paired devices (if multiple security devices are paired).
- Tap to view the camera full screen and to display controls such as taking a snapshot, start a recording, enable the camera’s microphone, alarm & pan-tilt controls (if supported), and to change the display aspect ratio and stream quality. Turn your mobile device horizontal to view the camera full screen.
- Tap to access the Notifications screen where you can view and manage notifications.
- Tap to access the video activity timeline where you can search and view events located on your DVR or NVR.
- Tap to access or return to Live View mode to view live video from your cameras.
- Tap to access device & camera settings. From here, you can change the device name, motion settings, siren settings, view technical information about your device, and more.
When viewing a camera full screen (as per instruction 4), use the spread and pinch gestures to zoom in or out. When zoomed in, tap and hold the image to move around within the Live View. This works when holding your mobile device horizontally or vertically.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>