Swann SWNHD-875ER Enforcer Bullet Security Camera Instruction Manual
- June 3, 2024
- Swann
Table of Contents
Swann SWNHD-875ER Enforcer Bullet Security Camera
Introduction
Congratulations on the purchase of your Swann Enforcer™ Bullet Security Camera.
- Microphone on camera helps capture extra detail of what’s happening at your property
- True Detect™ Heat & Motion sensing for reliable alerts
- Powerful Night2Day™ color night vision
- Works in rain & snow all year round
- Reliable network cable connection for power, audio & video
Important instructions
- Make sure the camera is fixed correctly and stable if fastened in place.
- Never place strain of any kind on the network cable connection. It’s designed to clip into the Ethernet port, but it won’t support weight and can be broken
- Do not operate if wires and terminals are exposed.
Important Note: All jurisdictions have specific laws and regulations
relating to the use of cameras. Before using any camera for any purpose, it is
the buyer’s responsibility to be aware of all applicable laws and regulations
that limit the use of cameras.
About this Manual: The content in this manual is for information purposes
only and is subject to change without notice. While every effort is made to
ensure that this manual is accurate at the time of printing, no liability is
assumed for any errors occurred.
For instructions on how to configure your camera for motion detection,
changing image settings, and other functions available, please consult the
manual for your NVR. Go to support.swann.com,
search for your model, then download
Connecting the Camera 3 Mounting the Camera
To connect the camera to your NVR, simply connect the supplied Ethernet cable to the LAN connection on the camera then plug the other end of the cable into one of the camera inputs on the back of your NVR
Please note : The power connector is provided as an alternative power option if required. Your NVR will provide power over the Ethernet cable when connected and a separate power adapter is not required.
Mounting the Camera
The camera can be mounted onto a flat surface using the screws and wall plugs
provided. The flat surface must have sufficient strength to hold the camera.
→ Position the camera in the location you want to mount it, and mark the screw
holes on the surface to position the screws (mounting template included).
Then, using the appropriate screws for the flat surface you’re fixing the
camera to, secure the camera in place.
→ If you’re mounting to a wooden surface, screw the camera directly to the
surface.
→ If you’re mounting to a masonry surface (bricks, concrete or similar),
you’ll need to use wall plugs.
Aiming the camera
- Loosen the screw (use a Phillips head screwdriver) to adjust the camera’s orientation. This enables you to rotate the camera so no matter what direction it is facing, your images will be the right way up. Tighten the screw to secure it in place
- Loosen the screw to tilt the camera up or down. Tighten the screw to secure it in place
- To pan the camera left or right, loosen the screw and position it accordingly. Tighten the screw to secure it in place.
Fitting the Weather Protector
The weather protector provides a weather-resistant shield for the camera’s
Ethernet connector to prevent damage from moisture, dust, and other external
factors that could interfere with the electrical connection. We also
recommend you seal the joins with electrical tape to ensure a more
weatherproof seal.
- Place the Rubber-O-ring around the Camera Ethernet Connector.
- Carefully push the Ethernet Cable through the Seal Cap and then the Seal Tube.
- Connect the RJ45 Connector on the Ethernet Cable to the Camera Ethernet Connector ensuring the locking tab securely clicks in.
- Align the lugs inside the Seal Tube to the Camera Ethernet Connector, then rotate the Seal Tube to lock it in place. The Rubber O-ring should become slightly bulged when the Seal Tube has been correctly connected.
- Gently open the pre-cut slit of the Foam Weather Seal and wrap it around the Ethernet Cable between the Seal Tube and the Seal Cap. Push this into the Seal Tube until it is almost all the way in.
- Firmly push the Seal Cap over the end of the Seal Tube and rotate it clockwise to screw it on to the Seal Tube. Continue to tighten until the Foam Weather Seal bulges slightly from the end.
Camera Location Tips
- Take into consideration what you want to monitor and where you’ll get the best view of it.
- How you’re going to connect the camera to your monitoring system; remember that cables and connections should be kept out of the weather.
- How to keep the camera out of harm’s way. We recommended mounting your camera at an elevated position.
- Place your camera as close to the area of interest as practicable. The best position is from about 13ft/4m above looking slightly down, keeping in mind the details you are looking for.
- Although the sky looks nice when you look at the live view from your camera, it is an unlikely direction for an offender to approach. Make sure your camera has minimal sky in it as the light in daylight can make the foreground of the image darker.
- Think about the most likely way a potential offender may approach your home, use your camera to give you the best coverage of these areas.
- The camera’s casing is resistant to different weather conditions and tampering. It would take an over – whelming event to damage the housing.
- The camera is weather and water-resistant but, prolonged exposure to adverse weather conditions such as sunlight and excessive moisture can damage the internal components.
- Run cables inside a wall cavity or other protected enclosure, and ensure that all wiring and connectors are insulated and protected from moisture.
- Don’t put your cable near live electrical wiring. AC electricity generates radio noise, which can interfere with the signal from your camera.
Limited Warranty – Terms & Conditions
Swann Communications warrants this product against defects in workmanship and
material for a period of one (1) year from its original purchase date. You
must present your receipt as proof of purchase for warranty validation. Any
unit which proves defective during the stated period will be repaired without
charge for parts or labor or replaced at the sole discretion of Swann. The end
user is responsible for all freight charges incurred to send the product to
Swann’s repair centers. The end user is responsible for all shipping costs
incurred when shipping from and to any country other than the country of
origin. The warranty does not cover any incidental, accidental or
consequential damages arising from the use of or the inability to use this
product. Any costs associated with the fitting or removal of this product by a
trades manor other person or any other costs associated with its use are the
responsibility of the end user. This warranty applies to the original
purchaser of the product only and is not transferable to any third party.
Unauthorized end user or third party modifications to any component will
render all warranties void. By law some countries do not allow limitations on
certain exclusions in this warranty. Where applicable by local laws,
regulations and legal rights will take precedence.
For Australia: Our goods come with guarantees which cannot be excluded under
Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality.
Helpdesk & Resources
Security Made Smarter Visit Swann Support Center at
support.swann.com. You can register your product
for dedicated customer support, download guides, find answers to commonly
asked questions, and more.
M875ERCAMREV1E | © Swann 202
Product Registration
Product Manuals
Support Community
Customer Support
Frequently Asked Questions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>