microtech 141093015B E-Ink Caliper Industry 4.0 User Manual

microtech 141093015B E-Ink Caliper Industry 4.0

MICROTECH E-INK CALIPER INDUSTRY 4.0

Product Information

• Manufacturer: MICROTECH
• Established: 1995
• Certifications: ISO9001:2015, ISO17025:2017

SPECIFICATION

Item No| Range| Resolution| **Accuracy*| Double Force| Carbide jaws| Preset| Go/NoGo| Max/Min| Formula| Linear corr| Calibr date| Connect. status| Recharge batt| Memory| Wireless| USB| Display**
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
| mm| inch| mm| μm| N
141093015B| 0-150| 0-6”| 0,005| ±15|  | | •| •| •| •| •| •| •| •| 1000 val| Long range / HID| USB HID / Update| E-ink 2.13”
141093015C|  | •| •| •| •| •| •| •| •| •
141093020B| 0-200| 0-8”| ±15|  | | •| •| •| •| •| •| •| •
141093020C|  | •| •| •| •| •| •| •| •| •
141093030B| 0-300| 0-12”| ±20|  |  | •| •| •| •| •| •| •| •
141093030C|  | •| •| •| •| •| •| •| •| •
NIB JAW INTELLIGENT E-INK CALIPER
141093321A| 0-300| 0-12”| 0,005| ±15| 8 /4|  | •| •| •| •| •| •| •| •| •| •| •| •
141093320B| ±20|  |  | •| •| •| •| •| •| •| •| •| •| •| •

• For internal jaw and depth bar accuracy according ISO13385-1

TECHNICAL DATA

Parameters

CORRECT MEASURING

BUTTONS

ZERO button – Set Zero
ZERO button 5sec – Off
MENU button – Menu
MENU button 2se c – Resolution, mm/inch  DATA button – Save or Send Data value DATA button 2sec – Memory
MENU+DATA button 2sec – Data transfer setting (Wireless, Wireless HID, USB) ZERO+DATA button 5sec – Reset

MENU STRUCTURE

MENU NAVIGATION

DATA button – Next

MENU button – Select

ZERO button – Exit

MAIN SCREEN

MEMORY
For save measuring data to internal caliper’s memory push DATA button To view memory push DATA button during 2s.
You can view saved data throw menu or send Wireless or USB connection to Windows PC, Android, MacOS or iOS devices. You can save up to 1000 values to memory

MEMORY NAVIGATION

DATA button – Next

MENU button – Select

MENU button 2sec. – Delete

ZERO button – Exit

DATA TRANSFER

DATA button – Save or Send Data value
MENU+DATA button 2sec – Data transfer setting (Wireless, Wireless HID, USB)
WIRELESS
ON – WIRELESS data transfer to MDS App for Android, iOS, Windows
HID- WIRELESS HID direct transfer data to any App in Windows, MacOS, Linux, Android devices (like keyboard). Configure data format in USB sub-menu 2D-S – Slave device on WIRELESS connection on HUB mode
USB
Select setting of data transfer
Configurating data transfer Dot/Comma and Tab/Arrow Down/CR+LF

MICROTECH est. 1995

LIMITS mode GO/NOGO

MAX – NGO more Upper limit

MIN – No-go less Lower limit

RANGE – Go between Limits

PEAK mode MAX/MIN

DISABLE- non active mode

ENABLE – activating mode

REFRESH – refresh peal value according timer

INDICATION LIMITS ON MAIN SCREEN

MAX indicating MAX measured value
MIN indicating MIN measured value

Select timer period Reset to disactivate mode

Select FORMULA Type (Math, Radius or other) Select arguments

SAVING DATA TO MEMORY OR SENDING WIRELESS/USB BY TIMER

TIMER mode

FORMULA mode

DISPLAY settings

Sleep ON – Eco mode (ECO – 1min, OFF – 60min)
Sleep OFF – E-ink caliper all time swath on
Base ON/ OFF – reading base reconnection

LINEAR error compensation

Device INFO

Linear correction error’s on device

DEVICE menu
Push 10 times to RESET device to factory settings Push 10 times to FIRMWARE UPDATE(Firmware update service only on Distributor or Manufacturer side)

CALIBRATION menu
Set calibration date info

MICROTECH
innovative measuring instruments 61001, Kharkov, Ukraine, str. Rustaveli, 39 tel.: +38 (057) 739-03-50 www.microtech.tools tool@microtech.tools

ISO9001:2015

ISO17025:2017

Change without prior notice

Documents / Resources

| microtech 141093015B E-Ink Caliper Industry 4.0 [pdf] User Manual
141093015B E-Ink Caliper Industry 4.0, 141093015B, E-Ink Caliper Industry 4.0, Caliper Industry 4.0, Industry 4.0
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>