SOLAX POWER Pocket WiFi+4GM LAN Interface Dongle Instruction Manual

Pocket WiFi+4GM
Installation Manualwww.solaxpower.com eManual in the QR code or at
http://kb.solaxpower.com/

Safety

General Notice

1. Contents may be periodically updated or revised. So lax reserves the right to make improvements or changes in the product(s) and the program(s) described in this manual without the prior notice.

2. The installation and maintenance can only be performed by qualified personnel who:
   • Are licensed and/or satisfy state and local jurisdiction regulations;
   • Have good knowledge of this manual and other related documents.

3. Before installing the device, carefully read, fully understand and strictly follow the detailed instruction of this manual and other related regulations.
   So lax shall not be liable for any consequences caused by the violation of the storage, transportation, installation, and operation regulations specified in this document and the user manual.

4. Use insulated tools when installing the device. Individual protective tools must be worn during installation, electrical connection and maintenance.

5. Please visit the website www.solaxpower.com of Sol ax for more information.

Descriptions of Labels

| CE mark of conformity
---|---
| UKCA mark of conformity
| RCM mark of conformity
| Do not dispose of the inverter together with household waste.
****| FCC mark of conformity

RF EXPOSURE WARNING!

• Install and operate the device in accordance with provided instructions.
• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
• End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CAUTION!

• Do not dismantle or scrap by force.
• Anti-static measures should be taken to decrease the damage of static electricity to electronic components.
• Keep away from flammable, explosive materials.
• All the product labels and nameplate on the module shall be maintained clearly visible.

CE DECLARATION OF COMFORMITY

• The product conforms to RF specifications and technical standards.
• The device complies with DOC declaration.
• The device meets the basic requirements and other relevant provisions of 2014/53/EU directive.
• The device is allowed to be used in all EU member states.

FCC RULES
This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a  residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there  is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is  encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Packing List

Note: Self-tapping screw: ST4.8L30; Expansion tube: 5.7*29.

Installation Tools

Electrical Connection

This product is equipped with two kinds of communication modes (WiFi or 4G). Users can choose based on actual needs.
*Note: Ensure all power has been turned off at least 5 minutes prior to installation.
• WiFi Mode
Step 1: Plug the Pocket WiFi+4GM to the inverter.

• 4G Mode
Step 1: Screw off the dongle back cover, and insert the Nano size SIM card. Screw those components.

NOTICE!

• Please choose local operators’ SIM card and confirm its availability with your dealer.
• Please obtain the corresponding SIM card APN from the operators, and fill in the APN during configuration.

Step 2: Remove the dust cap on the Pocket WiFi+4GM.

Step 3: Then screw down the antenna on Pocket WiFi+4GM.

Step 4: Plug WiFi+4GM into the port.

*Note: The direction of the buckle needs to be consistent (refer to “WiFi Mode”).
Step 5: Find the L-shaped antenna bracket in the package, as shown in the figure, use the expansion screw to fix the antenna bracket on the outdoor wall. Then attract antenna on the bracket.

*Note: The location of bracket is at least 1 meter away from the inverter or any other strong signal interference equipment.

Monitoring Connection

• Solar Cloud Registration
Step 1: Scan the QR code to download SolaXCloud App

https://play.google.com/store/apps/details?id=com.solaxcloud.starter
https://itunes.apple.com/cn/app/solaxcloud/id1300059673?mt=8

Step 2: Select the language

Step 3: Create a new account and follow the tutorial on the SolaXCloud APP or the App guide at https://www.solaxcloud.com/ to complete the WiFi configuration.

Step 4: Scan the QR code for more details of local mode login and the troubleshooting of Wi-Fi connection.

http://www.solaxcloud.com/wifiSetting/

• Monitoring Website Registration

• Note: Make sure the computer or laptop is well connected with the network.
  1 Open the browser, and type www.solaxcloud.com/ into the browser;
  2 Select the language and complete the registration, login, site adding and other related operations according to the “User Guide”-“App guide”.
  

Appearance and Dimensions

Technical Data

B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B27/B28/B66/B85 Cat NB2: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B28/B66/B71/B85
Degree of protection| IP 65
Weight| 124±10 g
Wireless Module| WiFi 2.4 GHz
Antenna Gain| 3 dBi
Operating Temperature Range| -35°C ~ +60°C

Definition of Indicators

Definition of Indicators

Status| Definition
Color| Green| Red
Mode| WiFi| 4G
OFF| Equipment not powered on| Equipment not powered on
Quick Flash| Router disconnected| Base station disconnected
Slow Flash| Inverter disconnected| Inverter disconnected
Flash Alternatively| MQTT disconnected| MQTT disconnected
ON| All connections succeeded| All connections succeeded

Maximum Gain Value

Contact Information

UNITED KINGDOM

Unit 10, Eastport Fields, Hem dale Business Park, Nunation, CV11 6GL
+44 (0) 2476 586 998
[email protected]

USA
3780 Kilroy Airport Way, Suite 200, Long Beach, CA, US 90806
[email protected]
Warranty
Registration Form

Brand
Installation Company Name __| | Number of Battery Attached
Installer Name __| Electrician License No. | Date of Delivery | Signature __

Please visit our warranty website: https://www.solaxcloud.com/#/warranty or use your mobile phone to scan the QR code to complete the online warranty registration. For more detailed warranty terms, please visit SolaX official website: www.solaxpower.com to check it.

https://www.solaxcloud.com/#/installationGuide
SolaX Power Network Technology (Zhejiang) Co., Ltd.
Add.: No. 288, Shisha Road, Tangle Economic Development Zone,
Tangle City, Zhejiang Province, 310000 P. R. CHINA
Tel.: +86 (0) 571 5626 0011
E-mail: [email protected] / [email protected]
Copyright © SolaX Power Technology (Zhejiang) Co., Ltd. All rights reserved.

References

• kb.solaxpower.com/
• Solax Cloud System
• SolaX Power: Solar Inverter, Battery System, EV Charger
• Solax Cloud System
• Solax Cloud System

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>