CuddleCot 230V Cooling Cot User Manual
- June 13, 2024
- CuddleCot
Table of Contents
CuddleCot 230V Technical Features
System Components
- 1 x sturdy plastic storage/carry case with metal closures
- 1 x Shnuggle™ plastic bassinet with mattress, dressing & stand
- 1 x mains powered cooling unit
- 1 x large flexible plastic cooling pad (reusable)
- 1 x small flexible plastic cooling pad (reusable)
- 1 x flexible insulated connection hose
- 2 x sheets foil backed insulation (1 small, 1 large)
- 1 x 100ml biocide additive liquid
- 1 x drain key
- 1 x user guide
Technical Specification Summary
Power requirement: Mains 230V/50Hz
Mains cable length: 2.1 metres with bonded plug
Internal fuse rating: : 4A/250V quick blow
Cooling method: : Thermoelectric (Peltier). Non refrigerant. Max. 180W
Cooling medium: : Purified water e.g. distilled/de ionised/sterilised. (Not
supplied). Self-contained. 450ml operating capacity
Operating temperature range: 8 – 13°C depending on ambient temperature
Total system dimensions as packed: 489mm x 324mm x 216mm, weight 8.9kg
Cooling unit dimensions: 27cm x 23cm x 13cm, weight 3.8kg
Cooling pad dimensions (unfilled): Large (full term) 550mm x 400mm, Small
(premature) 290mm x 154mm Cooling hose length: 900mm
Fluid hose connections type: Quick connect/release throughout
NOTE: All measurements are approximate
General Features
-
Low fluid alarm – visual and audible alerts
-
Variable temperature control
-
Display shows current temperature and set temperature (switchable between Celsius and Fahrenheit)
-
Whisper quiet operation; only two moving parts
-
Few moving parts therefore minimal user maintenance required
-
Non-slip rubber feet
-
All component surfaces can be wiped with any plastic safe sanitiser
-
Conformities:
UL 61010-1:2012. CAN/CSA-C22.2 No. 61010-1-12
IEC 61010-1:2010 (IECEE CB Scheme). CE compliant -
NOT A MEDICAL DEVICE
-
All spares available from UK stock – Contact us at www.cuddlecot.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>