microtech 17025 Inside Micrometer Innovative Measuring Instruments User Manual
- June 13, 2024
- microtech
Table of Contents
microtech 17025 Inside Micrometer Innovative Measuring Instruments
MODIFICATIONS
Item No| Range| Resolution| Accuracy| Extention rods| Standard
gauge
| Calibration
---|---|---|---|---|---|---
| mm| mm| mm| mm| | ISO 17025
132005030| 50-300|
0,01
| ±0,008| 13, 25, 50 (2pcs), 100| +| +
132005060| 50-600| ±0,015| 13, 25, 50, 100, 150, 200| +| +
132005100| 50-1000| ±0,020| 13, 25, 50, 100 (2pcs), 150, 200, 300| +| +
132005150| 50-1500| ±0,025| 13, 25, 50, 100 (2pcs), 150, 200
(2pcs), 300 (2pcs)
| +| +
132005200| 1000-2000| ±0,030| 50, 100 (2pcs), 200, 500| –| +
132005300| 1000-3000| ±0,050| 50, 100 (2pcs), 200, 500, 1000| –| +
132005400| 1000-4000| ±0,060| 50, 100 (2pcs), 200, 500, 1000 (2pcs)| –| +
132005500| 1000-5000| ±0,080| 50, 100 (2pcs), 200, 500, 1000 (3pcs)| –| +
MEASURING
OPERATION INSTRUCTIONS
Clean the oil from the measuring surfaces of micrometer by cloth.
For internal micrometers with range up to 1500mm use Standard gauge to set
size on micrometer head.
Internal micrometers with range over 2000mm has presetted 1000mm micrometer
head on measuring machine.
If necessery use measuring machine or high accuracy microemter to check
corerect micrometer head setting
Combine extention rods to make wide range internal measurings. During measure,
thimble should rotate only by ratchet. Ensure contact of workpiece with
measuring surfaces of the micrometer so tightly to ratchet cranked 2-3 times.
Try to prevent warping measuring surfaces.
After work the measuring surfaces of the micrometer wipe with a cloth and apply anticorrosive oil.
WARNING !
- Do not make the rotation of the micrometer screw in close measuring surfaces using a thimble.
- Avoid shocks or falling, even with a small height.
- Do not disassemble or adjust the micrometer persons who unrelated to the repair.
MICROMETER HEAD
INSTRUMENT FIGURE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>