141111155 Double Digital Caliper Microtech User Manual
- June 13, 2024
- microtech
Table of Contents
141111155 Double Digital Caliper Microtech
Product Information
- Product Name: MICROTECH DOUBLE DIGITAL CALIPER
- Model: Item No 141111155
- Calibration: ISO 17025:2017
- Quality Certification: ISO 9001:2015
- Range: 0-200 mm / 0-8 inch
- Resolution: Not specified
- Accuracy: Not specified
- Jaws: External, 150 mm
- Display: Waterproof, IP54 rated
- Digit Height: 9mm
- Switching Measurement Systems: Supports metric and English systems
- Power: CR1632 3V Battery
- Functions: ON/OFF, ORIGIN (after battery change), Switching between absolute and relative measurement (display INC) or setting ZERO, MM/INCH position memorized, Auto wake up & switch off
Product Usage Instructions
WARNING: In the process of working with calipers, the following should be avoided:
- Scratches on the measuring surfaces
- Measuring the size of an object in the process of machining
- Shocks or dropping, avoid bending of rod or other surfaces
To operate the MICROTECH DOUBLE DIGITAL CALIPER:
- Insert a CR1632 3V battery into the caliper.
- To turn on the caliper, press the ON/OFF button.
- To switch between metric and English measurement systems, use the corresponding button.
- Press and hold the ORIGIN button for 5 seconds to activate the ORIGIN function after a battery change.
- To switch between absolute and relative measurement, or to set the ZERO position, use the appropriate button.
- The caliper’s IP54 rated display is waterproof and can withstand some exposure to water.
- The caliper will automatically wake up when movement is detected and switch off after a period of inactivity.
Note: The product specifications and features are subject to change without prior notice. Please refer to the user manual for the most up-to-date information.
MODIFICATIONS
Item No| Range| Resolution| Accuracy| Jaws|
Waterproof| Display
---|---|---|---|---|---|---
External
| mm| inch| mm| μm| mm| |
141111155| 0-200| 0-8”| 0,005| ±60| 150| IP54| Digit height
9mm
BUTTON FUNCTIONS
Functions
- IP54 electronics
- Hand finished surfaces
- cr1632 3v battery
- mm/inch
- Position memorized
- Auto wake up & switch off
OPERATION INSTRUCTIONS
- Wipe with a clean cloth, soaked in gasoline, measuring surface of the frame and gauge calipers to remove anti-corrosion oil. Then wipe them with a clean dry cloth.
- If necessary, open the battery cover; insert the battery (type CR1632) according to the polarity of the electrodes. Blinking display information or absence suggests replacing battery.
- It will be indication on display «——-» after battery chnging. Press ORIGIN button for 5 sec to start reading system.
- During the measurement avoid warps of measuring surfaces of the instrument. Measuring surface must be fully in contact with the measurement object.
- After finishing work wipe the measuring surfaces of the caliper with a cloth soaked in gasoline and apply anticorrosion oil.
WARNING: IN THE PROCESS OF WORKING WITH CALIPERS SHOULD BE AVOIDED:
- Scratches on the measuring surfaces;
- Measuring the size of object in the process of machining;
- Shocks or dropping, avoid bending of rod or other surfaces.
DIMENSION
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>