PINLOCK Lens Antifog Insert for SMK Instruction Manual
- June 13, 2024
- PINLOCK
Table of Contents
PINLOCK Lens Antifog Insert for SMK
Product Information
The product is a helmet with a visor that includes a Pinlock lens. The Pinlock lens is a removable, anti-fogging lens that can be attached to the helmet visor to provide clear vision while riding. The Pinlock lens has a silicon seal that creates a thermal barrier between the lens and the helmet visor.
Product Usage Instructions
- Remove the helmet visor from the helmet as per the instructions provided by the helmet manufacturer.
- Gently flex the helmet visor to release tension on the Pinlock lens. Carefully remove the Pinlock lens from its position without touching the lens surface.
- Clean the Pinlock lens using non-abrasive cleaning products or liquids that do not contain ammonia or alcohol.
- Allow the Pinlock lens and the helmet visor to dry naturally before reassembling them.
- Flex the helmet visor and place the Pinlock lens between the two pins provided in the helmet visor. Avoid touching the lens surface. Place the silicon seal against the inside of the visor.
- Allow the helmet visor to regain its curved shape. Check with natural light if the silicon seal on the Pinlock lens makes full contact with the helmet visor. This is necessary to create the thermal barrier.
- Reinstall the helmet visor back on the helmet according to the instructions provided by the helmet manufacturer. Ensure that the Pinlock logo is visible from the outside of the visor.
How to clean
How to clean your Pinlock® lens
Your Pinlock® lens is made from moisture absorbing material. This material is
delicate and needs to be handled with care. Follow the instruction step by
step to keep your lens in perfect condition. Disclaimer: Do not use abrasive
cleaning products or liquids containing ammonia or alcohol.
-
Remove the visor
Remove the helmet visor from the helmet as shown in the helmet manufacturers’ instructions. -
Remove the lens
Flex the helmet visor delicately until there is no more tension on the Pinlock lens. Carefully remove thePinlock lens from its position, avoid touching the lens surface. -
Clean the lens
Prevent scratching the lens. Softly remove all dirt with a dry microfiber cloth. Only clean the Pinlock lens and the helmet visor using the Pinlock® Care products or mild liquid soap,lukewarm water and a soft moist cloth. -
Let it dry naturally
Allow the Pinlock lens and the helmet visor to dry naturally beforereassembling them. -
Reinstall the lens
Then flex the helmet visor and place the Pinlock lens between the two pins provided in the helmet visor, avoid touching the lens surface. Place the silicon seal against the inside of the visor. -
Check the seal
Carefully allow the helmet visor to reacquire its curved shape. Check with natural light if the silicon seal on the Pinlock lens makes full contact with the helmet visor. This is needed for to create the thermal barrier. -
Reinstall the visor
Fit the helmet visor back on the helmet. Check if you can read thelogo from the outside of the visor.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>