DAKE 75H-2023 Hand Machine Instruction Manual
- June 13, 2024
- DAKE
Table of Contents
DAKE 75H-2023 Hand Machine
EXPLODED VIEWS & PARTS LISTS
HAND PUMP ASSEMBLY
Item No.| Part Name| Part No.| Qty| | Item No.|
Part Name| Part No.| Qty
---|---|---|---|---|---|---|---|---
1| Pump Body| 546| 1| 12| Retaining Ring (3/8”)| 43972| 6
2| Ball Valve (Ø1/2”)| 586| 3| 13| Pump Plunger| 554| 1
3| Hex Cap Screw
(1/4”-20 x 1/2″ Nylock)
| 28297| 1| 14| Handle Socket Pin| 594| 3
15| Valve Rod| 1129| 1
4| Washer (#12 Flat)| 43629| 1| 16| Valve Rod Packing Nut| 576| 1
5| Pump Plunger Leather| 599| 1| 17| Valve Rod Packing| 987| 8
6| Check Valve Spring| 579| 1| 18| Pipe Plug (3/8”)| 588| 1
7| Tube Fitting| 71413| 1| 19| Set Screw (3/8”-16 x 5/8”)| 43589| 1
8| Pump Packing| 573| 7| 20| Pump Gasket| 591| 1
9| Pump Packing Nut| 551A| 1| Hand Pump Complete Assembly| 700887| –
10| Handle Socket| 550| 1| Repair Kit- Cylinder & Hand Pump Assembly (Items:
5, 8, 17,
20, 26B, 27, 34, 38)
| ****
701292
| ****
–
11| Handle Socket Link| 555| 1
WORKHEAD ASSEMBLY
GENERAL ASSEMBLY
GENERAL ASSEMBLY PARTS LIST
Item No.| Part Name| Part No.| Qty| | Item No.|
Part Name| Part No.| Qty
---|---|---|---|---|---|---|---|---
36| Screw Adjusting Wheel| 716521| 1| ****
56
| Pulley| 727| 2
37| Yoke| 732| 1| Pulley Bolt| 43361| 2
39| Gauge| 71267| 1| Pulley Nut| 43916| 2
Bushing| 81384| 1| Pulley Lock Washer| 43647| 2
40| Gauge Extension| 731| 1| 57| Vent Tube| 67761| 1
41| Roller| 592| 4| 58| 1/8” NPT Fitting| 71413| 2
42| Roller Shaft| 733| 2| 59| Cable| 45953| 17’
Retaining Ring| 43975| 4| 60| Cable Clamps| 991| 4
43| Dake Name Plate| 81002| 1| ****
61
| Table Spacer| 86488| 4
45| Handwheel| 10631| 1| Hex Head Bolt (5/8”-11 x 10-1/2”)| 79983| 4
46| V-Block| 336| 2
47| Table Plate| 702| 2| Hex Nut (5/8”-11)| 43917| 4
48| Table Pins| 569| 6| Lock Washer (5/8”)| 43648| 4
48A| Safety Pins| 302816| 6| 70| Hex Nut (3/8”-16)| 43912| 1
49| Table Channel| 706945| 2| F4| Flat Washer (1/4”)| 43631| 1
50| Frame| 706943| 1| F5| Screw (1/4”-20 x 1/2”)| 43301| 1
51| Base Angle| 566| 2| F6| Hex Cap Screw (1/2”-13 x 1-1/4”)| 43348| 4
52| 3/8” NPT 37° Fitting| 1251| 2
53| Fitting Nut| 46614| 2| F7| Socket Cap Screw (1/2”-13 x 2-1/2”)| 24561| 1
Fitting Sleeve| 51454| 2
54| Tube Assembly (Includes 53 & 54)| 700121| 1| F8| Socket Cap Screw (1/2”-13
x 1-1/4”)| 43470| 3
55| Handle| 218| 1| F9| Flat Washer (1/2”)| 43634| 4
| F10| Lag Screw (1/2” x 2-1/2”)| 72355| 4
F11| Label – Made in USA| 76936| 1
TABLE HOIST ASSEMBLY
Item No.| Part Name| Part No.| Qty| | Item No.|
Part Name| Part No.| Qty
---|---|---|---|---|---|---|---|---
56| Hex Nut (3/8”-16) (Not Shown)| 43912| 2| 69| Hex Cap Screw (3/8”-16 x
2-3/4”)| 43335| 2
62| Hand Crank Assembly| 701653| 1| 71| Drum Shaft| 724| 1
63| 72| Drum Key| 737| 1
64| Worm Shaft| 384| 1| 73| Worm Gear| 736| 1
65| Retaining Ring| 27437| 2| 74| Cable Drum| 723| 1
66| Worm Key| 47364| 1| 75| Retaining Ring| 43992| 1
67| Worm| 385| 1| Complete Table Hoist Assembly
– Includes Crank
| 700112| –
68| Hoist Frame| 725| 1|
Please contact factory for current prices.
ORDERING INFORMATION
Parts are available for direct purchase from Dake or through a distributor.
When placing a parts order, you will need to provide the part number, name of
part, and model number. All parts shipped F.O.B. Factory in Grand Haven, MI.
Dake Corporation 1809 Industrial Park Dr
Grand Haven, MI 49417
www.dakecorp.com