F03951 Halls Greenhouses Universal 128 Sd Instruction Manual
- June 13, 2024
- GREENHOUSE
Table of Contents
F03951 Halls Greenhouses Universal 128 Sd
Product Information
The Qube+ is a greenhouse model manufactured by Halls Greenhouses. It is designed for gardening enthusiasts to create an ideal environment for growing plants. The greenhouse is made of high-quality materials and comes with all the necessary fittings for assembly. Please note that the user manual provided here is a general guide and may be applicable to different sizes of the same greenhouse model.
Product Usage Instructions
- Before installing the greenhouse, ensure that you have a flat and level surface that is at least as big as the external dimensions of the greenhouse. This will facilitate the setup process.
- Once the surface is prepared, you can start assembling your greenhouse. Follow the step-by-step instructions provided in the user manual.
- All bolts, nuts, and fittings required for assembly are included in a separate box. Make sure to use the correct components according to the illustrations in the manual.
- For doors and windows, apply grease on the screws to ease assembly. Glaze the doors and vents during the initial assembly.
- Before glazing, ensure that the gables and sides are level and straight, and that doors and windows function properly. Do not leave the greenhouse partially glazed.
- The user manual provides instructions on how to install polycarbonate sheets. Use a fine-tooth saw for adjustments if necessary. Avoid contact between the polycarbonate sheets and the ground to prevent algae growth.
- If desired, you can seal the sheets against insects using aluminum tape or silicone at the top. Seal the bottom with air-strip tape to allow condensation to escape.
- The tools required for assembly are listed in the manual. Make sure to have them ready before starting the installation process.
- For additional tips and tricks on assembling your greenhouse, visit www.juliana.com.
- Note that not all insurance companies automatically cover greenhouses. Check with your insurance provider for coverage.
- In case of any problems or defects, contact your dealer and provide them with the greenhouse model and component number for better assistance.
- Congratulations on your new greenhouse! Enjoy the gardening experience it brings for many years to come.
www.hallsgreenhouses.com
Please refer to website for the most up to date instruction
May we congratulate you on your new greenhouse
Congratulations On Your Choice Of Greenhouse Juliana Drivhuse A/S is a
privately owned Danish company established in 1963. At Juliana Drivhuse we
design, develop and manufacture our greenhouses based on principles of
simplicity, aesthetics, functionality and quality. Over the years, Juliana
Drivhuse has acquired several competing companies, so that today we offer
three brands: Halls, Juliana and Gabriel Ash. Each brand contains products
with unique designs and functionalities, but where the common feature is a
correlation between quality and price.
All products are designed and manufactured to last for many years and form the
framework for people and the good life, whether it is primarily for
cultivation or as an oasis in the garden. On www.juliana.com you can read more
about the company, the individual brands, and the wide range of accessories
available for our greenhouses.
Installation Manual
When assembling your new greenhouse, you need to follow these instructions step by step. You will find all bolts, nuts and fittings in a separate box.
NOTICE: These instructions might be designed for several sizes of the same greenhouse model.
- All illustrations are marked with the following symbol:
- Seen from the inside: Seen from the outside:
- If a component from a box is to be used at a later time in the assembly it is indicated by the following symbol:
Safety Precautions
- Only carry out assembly in dry and calm weather.
- Make sure you have an assistant to help you.
- Always wear work gloves while glazing. Greenhouse glass has sharp edges, especially if it breaks.
- Assistants, and especially children, must be warned that broken glass presents a safety hazard. Pick up all broken glass at once and remove it with care.
- Any ladders used must be placed on a level surface.
Location
The right location of the greenhouse is important to create the best growth
conditions for plants and ensure the longevity of the greenhouse.
The greenhouse must be placed in as sunny a position as possible and shielded
from strong winds. As far as possible, avoid positioning the greenhouse under
trees as the shade will encourage algae growth. Likewise, fallen branches and
leaves can damage the greenhouse and clog up the gutters.
We recommend that you locate the greenhouse on your favourite spot in your
garden, especially if you want to use the greenhouse for purposes other than
growing plants.
IMPORTANT: Before installing the greenhouse you must create a flat and true surface at least as big as the external dimensions of the greenhouse – this will ease the setup of the greenhouse.
Base
There is not a base included with this product. However, one of our pre-
fabricated bases can be purchased separately. If you purchase our pre-
fabricated base anchor holes must be deep enough to extend below the frost
line. Follow measurements shown on the following pages. All measurements are
external measurements.
If our pre-fabricated base is used this is attached to the greenhouse at every
vertical glazing bar as shown on drawing A/B.
The best assembly order:
-
Ensure level ground.
-
Assemble base and ensure measurements as show on drawing. Make sure diagonal measurements are identical.
-
Mark holes and move the base.
-
Dig holes to extend below the frost line. Follow local recommendations.
-
Add a bend on the end of the ground anchors as shown on the drawing.
-
Place base with ground anchors above holes.
-
Make sure that the base is 100% level and at a straight angle. Make sure diagonal measurements are identical.
-
Fill up the holes with concrete.
Example: a hole with dimensions ø150 mm and 900mm in depth needs approximately 16 liters of concrete. -
Make sure that the base is still 100% level and at a straight angle. Make sure diagonal measurements are still identical.
Upon recommended time of curing you may start assembling your greenhouse.
Locating The Greenhouse On A Solid Base
If the greenhouse is not going to be concreted down, it must be secured using
suitable brackets. Brackets/bolts are not part of this purchase. If a pre-
fabricated base is used ground anchors should be cut off with a hacksaw at the
same height as the base.
Pre-fabricated base is designed for casting and therefore additional drilling
and purchase of materials for this purpose is to be expected. Be aware that
most insurance companies do not cover greenhouses that do not have a cast
base.
Order of Assembly
Follow the assembly order as shown on the following pages.
Place components as shown on the drawing and then assemble the section in the
order shown in the pictures. Do not tighten the nuts completely until the
entire section is assembled.
When all sections are complete the body of the greenhouse can be assembled.
NOTICE: In several places the assembly instruction shows that extra bolts
must be inserted in the profiles. These are to be used for attaching other
parts later in the process.
Doors and Windows
Add grease on the screws for the door to ease assembly. Doors and vents should
be glazed during the initial assembly.
IMPORTANT: Before glazing make sure that the gables and sides are level
and straight, and that door(s) and window(s) work perfectly.
A greenhouse should never be left partially glazed.
Glazing
- Clean glass and profiles with ethanol.
- Fit one glass at a time – add butyl tape (20-1230) on vertical profiles.
- Fit the glass and finish with cappings.
Recommended order of glazing: roof – sides – gables.
If you accidentally break a pane, carefully pull the broken glass outwards.
Clean the profile completely before fitting a new pane of glass.
Polycarbonate Installation
The illustrations show how to fit the sheets and strips. If adjustment is
necessary use a fine-tooth saw. NOTICE: To avoid the growth of algae, do not
allow the polycarbonate sheets to come into contact with the ground.
If desired, the sheets may be sealed against insects. Seal the top using
aluminium tape or silicone. The bottom should only be sealed with air-strip
tape to allow condensation to escape.
Tools
The tools needed to assemble the greenhouse are shown on the following pages.
Tips and Tricks
See www.juliana.com for more tips on assembly of
your greenhouse.
Maintenance
- Grease the hinges of the doors, lock and – if included – sliders approximately every 6 months.
- Tighten bolts/nuts.
- Clean the gutters from leaves etc.
- Adjust windows if necessary.
- Replace broken glass.
- Clean the greenhouse before and after the growing season.
Winter and Storm Protection
If you anticipate snow and/or a storm we recommend the following:
- Support the roof section.
- Remove larger amounts of snow from the roof.
- Take precautions to prevent snow falling from e.g. a tree or roof.
- Remove the cylinders from the automatic window openers (accessory).
- Secure door(s) and window(s) to prevent wind damage to the greenhouse.
Please note that not all insurance companies automatically cover greenhouses.
12-year Guarantee
A full description of the guarantee can be found on www.juliana.com.
Provided that the greenhouse is assembled and maintained according to the
requirements, the greenhouse is covered by a 12-year guarantee. In case of
missing parts/defects this must be reported immediately.
General maintenance of the greenhouse such as cleaning, lubrication, post-
tensioning of nuts/screws must be complied with, as this may affect the
structural quality of the greenhouse and its resistance to wind and snow load.
Please note that the guarantee does not cover;
- Damage and functional problems due to lack of lubrication and maintenance.
- Any paintwork is covered by a 2-year guarantee.
- Nuance differences in colour may occur and there may be small marks on the profiles due to the painting process. This is not covered by the guarantee.
- Glass, polycarbonate, freight, assembly, possible removal, possible consequential damage, labour costs, etc.
- Parts damaged by external influences, such as: other building parts, climate impacts, vandalism, force majeure or other external conditions. E.g. remember to remove snow from the roof to avoid possible breakage due to excessive weight.
- Wear parts (such as handles, wheels, sliders, cylinders and locking devices). Wear parts must be replaced on a regular basis depending on use and operation.
- Product defects arising from incorrect/inappropriate use of parts.
NOTICE: a greenhouse is a single-skin, dry-build construction that is not 100% dense. Depending on weather conditions, leaks may occur at roofs, windows, doors and corners.
Complaints
All our greenhouses are built according to the highest quality standards.
However, should you experience any problems, please contact your dealer at
once. When describing the defect, please state the greenhouse model and
component number.
Congratulations on your new greenhouse, which we hope will bring you great joy
for many years to come.
Overview
Fittings
Accessories
Preparation
Rear gable
Front gable
Assemble
Hærdet glas
Door
Windows
F03915
#| Part number
00S| 20-40051261-00S
08S| 20-40081273-08S
09S| 20-40040618-09S
10S| 20-40040618-10S
19S| 20-10300640-19S
20-1241| 20-1241
302S| 20-40041214-302S
21S| 20-40010635-21S
22S| 20-40010515-22S
31S| 20-40011225-31S
51S| 20-40011609-51S
55S| 20-40011262-55S
56S| 20-40090642-56S
57S| 20-40100642-57S
58S| 20-40190642-58S
59S| 20-40010595-59S
41S| 20-40011026-41S
40S| 20-40010488-40S
42S| 20-40010619-42S
18S| 20-10301260-18S
F03916 / F03918|
#| Part number|
302S| 20-40041214-302S|
31S| 20-40011225-31S|
322S| 20-40031214-322S|
502S| 20-40021214-502S|
51S| 20-40011609-51S|
70S| 20-40230650-70S|
71S| 20-40240597-71S|
72S| 20-40250592-72S|
75S| 20-40200642-75S|
GR1022| GR10220254|
20-1241| 20-1241|
F03917
#| Part number
303S| 20-40041832-303S
31S| 20-40011225-31S
323S| 20-40031832-323S
503S| 20-40021832-503S
51S| 20-40011609-51S
70S| 20-40230650-70S
71S| 20-40240597-71S
72S| 20-40250592-72S
75S| 20-40200642-75S
GR1022| GR10220254
20-1241| 20-1241
F03924 / F03925 / F03926
#| Part number
01645| 01645
01S| 20-40210180-01S
02S| 20-40220180-02S
20-1014| 20-1014
20-1015| 20-1015
20-1016| 20-1016
20-1017| 20-1017
20-1018| 20-1018
20-1019| 20-1019
20-1020| 20-1020
20-1024| 20-1024
20-1025| 20-1025
20-1027| 20-1027
20-1207| 20-1207
20-1209| 20-1209
20-1210| 20-1210
20-1213| 20-1213
20-1214| 20-1214
20-1219| 20-1219
20-1220| 20-1220
20-1221| 20-1221
20-1222| 20-1222
20-1230| 20-1230
206S| 00310206S
301| RN00300301
301S| 20-40040024-301S
21S| 20-40030024-321S
322| RN00300322
134| 00134
458| RN00310458
501S| 20-40020024-501S
602| N00300602
603| N00300603
618| 00300618
631| RN00300631
632| 00300632
625| 00625
697| 00697
229| 00229
F11403 / F11404 / F11405
#| Part number
3mm. – Hærdet glas – Tempered glass – Sicherheitsglas
A| 00281600
C| 00281613
D| 00281603
G| 00281606
H| 00281607
I| 00281608
J| 00281609
K| 00281610
F03834 / F03835 / F03836
#| Part number
20-1030| 20-1030
20-1203| 20-1203
20-1204| 20-1204
437N| RN00310437N
80| 07093080
81| 07093085
82| 07093082
83| 07093083
84| 07093084
85| 07093086
F06443 / F06444 / F06445
#| Part number
Fundament – Foundation – Fondement
100| 00500989S
100LH| 00310341S
100RH| 00310342S
101| 00310600S
102-1| 00511235S
102-2| 00511250S
02-3| 00511872S
102-4| 00511262S
638| 00300638
682| 00682BK
F00040| F00040
994| 00500994
995| 00500995
996| 00500996
999| 00510618S-1
| | |
This product is delivered by a company in the Juliana Group – www.juliana.com
References
- Juliana Drivhuse - Drivhuse i topkvalitet | Juliana.com
- Halls Greenhouses OFFICIAL site | Hallsgreenhouses.com
- Juliana Drivhuse - Drivhuse i topkvalitet | Juliana.com
- Juliana Gewächshäuser | Juliana.com