MORRIS MAC-16251 Tower Fan 3 in 1 Instruction Manual
- June 6, 2024
- MORRIS
Table of Contents
Model: MAC-16251 Tower Fan 3 in 1
Instruction Manual Model: MAC-16251
READ AND SAVE THESE INSTRUCTIONS Attention: Pictures in the IM are for reference only.
IMPORTANT SAFETY INSTRUCTIONS
Caution
Read Rules for Safe Operation and Instructions Carefully.
WARNING
- If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
- Indoor and household use only.
- To protect against the risk of electrical shock, do not immerse the unit, cord or plug in water or other liquid.
- . This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- When the appliance is not in use and before cleaning, unplug it from the outlet.
- When the fan was assembled, the rotor blade guard shall not take off anymore.
- Correct Disposal of this product This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
- Non-specialized personnel or unauthorized repair personnel shall not to repair or modify the machine.
- It is forbidden to operate with wet hands to avoid electric shock.
- It is prohibited to use this unit in environments with flammable and explosive gases and direct sunlight for a long period shall be avoided.
- Do not place this unit in an inclined or another uneven place to prevent the unit from falling and causing damage to the unit or internal parts.
- This machine has a safety switch. If the honeycomb filter support has not been installed well, the unit will not operate as usual; when the machine is working, do not remove the honeycomb filter frame.
- At any time the water level in the tank must not exceed the “MAX” (maximum) scale, and during humidification, the total water level in the tank must be controlled, and must not be below the “MIN” (minimum) scale.
- After the water tank is filled with water, do not tilt or collide with the unit when placing or moving it. To move the unit body, please drive it slowly from the side to prevent water overflow.
- In using the unit, prohibit overturning to avoid any accident. If the unit topples over accidentally, and it contains water, unplug the power cord immediately and take it to an authorized service center.
- When the unit is running, do not knock at or shock the unit body forcibly or it may lead to automatic shutdown, in which case simply restart the unit.
- Be aware that high humidity levels may encourage the growth of biological organisms in the Environment.
- Do not place items on the unit, and covering the outlet is strictly prohibited.
- When cleaning the unit body, apply a damp cloth (or add a little cleaning agent) to wipe, and never use corrosive cleaning agent or solvent for cleaning. Never rinse the unit with water.
- Do not have the air inlet and outlet of the unit close to walls, curtains and other objects, or they may block the airflow and affect air supply.
- Do not place the unit directly below the power outlet.
- Do not use the unit around the tub, sprinkler or swimming pool.
- Product repair must be carried out in a designated service center.
- To protect against the risk of electrical shock, do not immerse the unit, cord or plug in water or other liquid.,
- Use a soft cloth moistened with mild soap, and then use a dry cloth to wipe it again.
- Do not permit the area around the humidifier to become damp or wet. If dampness occurs, turn the output of the humidifier down. If the humidifier output volume cannot be turned down, use the humidifier intermittently. Do not allow absorbent materials, such as carpeting, curtains, drapes, or tablecloths, to become damp.
-
Never insert fingers, pencils, or any other object through the grille when fan is running.
-
Disconnect fan when moving from one location to another.
-
Make sure the fan is on a stable surface when operating, to avoid overturning. · DO NOT use a fan close to the windows, rain may create
electrical hazards. · -
Household use only.
PRODUCT INTRODUCTION
Notice Pictures in the manual are for reference only, and real objects
within the packaging box will prevail in the end.
Parts name
INSTRUCTIONS
** Guidance on feeding water, disassembly & washing of the water tank
Notice**
- Please clean up water accumulated at the bottom of the water tank in a timely manner when the product is left unused.
- Please remove the power plug when feeding water and cleaning. Please make sure that the water pump module is fixed in position before startup.
- Random displacement of the water pump module can cause abnormalities of the product in the cool wind function.
- Two ways for feeding water: æ Pull out half of the water tank and feed water directly without disassembling the water pump module. çSeparate water pump module, and fully pull out the water tank, to feed water or clean the water tank.
Guidance on feeding water and disassemble & washing of the water tank
-
Pull the water tank buckle to the horizontal state.
-
Pull out the water tank to the position as shown in the figure (push the water tank inside after feeding water)
-
Unscrew the rotary knob in “–” shape manually (90° anticlockwise) to separate the water tank from the water pump module (including the water pipe).
-
Pull out the water tank slowly to clean it up or feed water.
-
After feeding water or cleaning the water tank, install the water pump module in the water tank. Insert the front hook into the slot of the water tank, and then rotate the rotary knob in the “–” shape clockwise for 90°, and close it as shown in the figure.
-
Push the water tank inside slowly and stir the water tank buckle to lock it up.
Usage of the ice crystal box
Notice
- The ice crystal box can be frozen repeatedly and recycled; You can also choose not to use it based on the temperature.
- Please keep the ice crystal box closed to prevent damage and liquid leakage.
- The ice crystal box is made of eco-friendly and toxic-free materials and can be refrigerated in the fridge safely.
- When using the frozen ice crystal box in the water tank, the temperature at the air outlet will drop after operating the cool wind function.
- Ice blocks can be used to replace the frozen ice crystal box, to exert the same cooling effect.
- Control the water level of the water tank to be lower than the “max” (maximum) indicating scale when feeding water, and if the water level is lower than “min” (minimum) indicating scale, please feed water in time.
1 Pull out half of the water tank below the machine. 2 Take the ice crystal box out of the package and place it inside a refrigerator to freeze for more than 3 hours. Put the frozen ice crystal box in the water tank, and feed water below “max” (maximum) indicating scale.
INSTRUCTIONS
Operating instructions of the machine body
Buttons
| Function description
---|---
Startup/Standby| Press to activate or deactivate the appliance.
Air swing| Press to activate or deactivate air swing.
Wind speed| Press the button to switch wind speed to low-grade medium grade
and high grade
Wind speed| Press the button to select among these three types of wind: Normal
wind (grade 3,
the wind speed indicator light is on), sleep wind (grade 1, sleep wind, the
indicator light is on), natural wind (grade 1, natural wind, the indicator
light is on).
Timing / Reservation| The indicator light will be on when pressing the button
under startup state, and the timed shutdown time can be set by shortly
pressing the button (the cyclic is based on 1-2-3···-7-0-1···) The indicator
light will be on when pressing the button under standby state, and the
reserved startup time can be set by shortly pressing the button (the cyclic is
based
on 1-2-3···-7-0-1···)
Cool wind| Shortly press to open or close cool wind under startup state. The
experience effect
is better, when opening the cool wind function in dry or hot weather
conditions.
If the indicator light flashes, please feed water in time, and then press
again.
INSTRUCTIONS
Remote control button description
Notice!
The remote control should be normally used within 5 meters of the front of the
product and 30 degrees of the deviation angle.
The battery contains many heavy metals, acids, bases, etc., which may threaten
human health; Waste batteries should be recycled separately.
Note Both machine body operation “ ” and remote control “ ” are buttons of wind type; Both machine body operation ” ” and remote control ” ” are buttons of cool wind;
CLEANING AND MAINTENANCE
****Notice
- Disconnect the power before cleaning the product. Clean after the product is shut down for two minutes.
- Prevent from using any abrasive tools and solvents that may damage the surface to clean up the product.
- Detergent can be used in the cleaning, and then wiped clean with dried cloth in time.
- Prevent from washing the machine body with water directly, wash disassemble parts (wet curtain parts) with a soft brush and then install them after they are cleaned and dried. It is not allowed to take the product apart for any modification.
- It is recommended that this product should be checked and cleaned regularly in order to extend its service life.
CLEANING AND MAINTENANCE
Guidance on the disassembly and installation of wet curtain parts
-
Remove the wet curtain support.
-
Rotate the bottom buckle at first, and then remove the wet curtain
-
Take out the wet curtain for cleaning.
-
Install wet curtain support.
Replace water
After stopping the cool wind function for 2 minutes, it’s applicable to
pull out the water tank to replace water, as water in the pipeline and wet
curtain flows back to the water tank.
SERVICE GUIDE
Troubleshooting
Please check the following points before asking others for inspection or maintenance.
| Faults | Fault description |
|---|---|
| The product cannot be normally operated after being installed. | The power cord |
fails to be plugged in or has bad contacts
The air volume is getting smaller.| The machine switch fails to be opened.
Abnormalities of cool wind function.| The wet curtain is dirty, and should be
cleaned on a regular basis.
Abnormalities of cool wind function.| Check whether the water tank lacks
water.
MAINTENANCE INSTRUCTION
The fan requires little maintenance. Do not try to fix it by yourself. Refer it to qualified service personnel if service is needed.
- Before cleaning and assembling, fan must be unplugged.
- To ensure adequate air circulation to the motor, keep vents at the rear of the motor free of dust. Do not disassemble the fan to remove dust.
- Please wipe the exterior parts with a soft cloth soaking a mild detergent.
- Do not use any abrasive detergent or solvents to avoid scratching the surface. Do not use any of the following as a cleaner: gasoline, thinner.
- Do not allow water or any other liquid into the motor housing or interior parts.
CLEANING
- Be sure to unplug from the electrical supply source before cleaning.
- Plastic parts should be cleaned with a soft cloth moistened with mild soap. Thoroughly remove soap film with a dry cloth.
NOTICE ABOUT RECYCLING
Your product is designed and manufactured with high-quality materials and
components that can be recycled and reused. This symbol means that electrical
and electronic equipment, at their end-of-life, should be disposed of
separately from your household waste. Please dispose of this equipment at your
local community waste collection/ recycling center. In the European Union,
there are separate collection systems for used electrical and electronic
products.
Please help us to conserve the environment we live in!
DECLARATION OF CONFORMITY
Herewith, KALLIOPI KARIDA & CO., LP states that this product, complies with
the requirements of below directives:
EMC-Directive: 14 / 30 / EU Low
Voltage Directive: 14 / 35 / EU CE
Marking: 93 / 68 / EEC RoHS
Directive: 11 / 65 / EU & 15 / 863 / EU
The detailed declaration of conformity can be found at
www.morris.gr
Exclusive importer in Greece:
KALLIOPI KARINA & CO., LP
87A, 17th Noemvriou str, P.C.
55535 Thessaloniki Greece
T: +302316006600
F: +302316006650
www.morris.gr
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>