IMOU V1.0.2 Indoor Smart Security WiFi Camera User Guide
- June 13, 2024
- imou
Table of Contents
Quick Start Guide
V1.0.2
V1.0.2 Indoor Smart Security WiFi Camera
-
Power On the Camera
Connect the camera to power. You can choose wireless or wired network connection (see part 1). -
Get the lmou Life App
Scan the QR code on part 2 or search for “Imou Life’ to download and install the app. Create an account and log in. -
Set Up the Camera
Scan the QR code on the body of the device or on the cover of this guide with the app, and then fol low on-screen instructions to complete the setup (see part 3). -
Install the Camera
Make sure the mounting surface is strong enough to hold three times the weight of the camera. For detailed installation process, please see part 4.
LED
Green| Status
Flashing| Device Status
Ready to set up the device
---|---|---
Solid| Working properly
Red| Flashing| Network disconnected
Failed to set up the device|
Solid| Booting
Device malfunction
Green & Red| Alternating| Updating firmware
White| Flashing| An alarm is triggered
Off| /| Power off
LED turned off
****If you need to reset the camera, press and hold the reset button for 10 s. The LED turns solid red when the camera is booting.
Documents / Resources
| IMOU
V1.0.2 Indoor Smart Security WiFi
Camera
[pdf] User Guide
V1.0.2, V1.0.2 Indoor Smart Security WiFi Camera, Indoor Smart Security WiFi
Camera, Smart Security WiFi Camera, Security WiFi Camera, WiFi Camera, Camera
---|---