SAMSUNG SR190AD Soundbar TV Instruction Manual

: June 13, 2024
: Samsung

Table of Contents

Getting to know your Soundbar
Getting to know your Soundbar
Getting to know your Soundbar
Using your Soundbar
Using your Soundbar
Warranty
How to extend your warranty?
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SAMSUNG SR190AD Soundbar TV Instruction Manual

Getting to know your Soundbar

You’ Il be up and running in no time

Ready? Let’s begin

Please read these instructions carefully. They contain important information which will help you get the best from your Sound bar and ensure safe and correct installation and operation.

If you require any further assistance, our technical experts are happy to help. For full details, refer to the product support section at the end of these instructions.

Accessories

Remote Control
AUX to RCA Cable
Optical Cable
Power Adapter
2 x Rawl plugs and Screws ( for wall mounting)
2 x Wall Mount Kit

Remote Control
Optical Cable
AUX to RCA cable
Rawl plugsand Screws
Power Adapter
2xWall Mount Kit

Getting to know your Soundbar

You’ll be up and running in no time

Fig 2. Right hand end

Fig 3. Back
Soundbar

1. Press 0.5s: Power on
Press 3s: Power off Short press: Switch source (HDMI, Optical, Bluetooth, AUX, USB) . Volume+ 3 . Volume –
Long Press: Bluetooth Pairing. Short press: Play or Pause
Power Input Port
Subwoofer Input Port
USB Input Port
AUX Input Port 9. Optical Input Port
HDMI ARC Input Port

Getting to know your Soundbar

You’ll be up and running in no time

Fig 4.

Short press: Power on Long press: Power off
Mute
Audio source: Bluetooth
Audio source: Optical 5. Audio source: HDMI ARC
Audio source: Aux in
Audio source: USB 8. EQ setting: Music
EQ setting: Movie 10. EQ setting: Bass
EQ setting: News
EQ setting: Game 13. Increase bass
Decrease bass
Short press: 3D effect ON/OFF Long press: LED display ON/OFF

Using your Soundbar

Let’s get started

Optical Mode

Fig 5.
Using Instruction Cable

STEP 1: Remove the white protective caps from the ends of the optical cable.
STEP 2 : Fully insert the optical cable into Soundbar and TV until you hear a ‘click’
STEP 3 : Short press and switch Soundbar audio source to Optical mode.
STEP 4 : Set TV audio format to PCM. Set TV sound mode to Fixed or Standard.
STEP 5 : Restart TV.
Note: Soundbar may not be able to decode all digital audio formats from TVs. In this case, Soundbar will mute. This is NOT a defect. Please try other devices.

Aux to RCA Mode

Fig 6.
Using Instruction Cable

STEP 1 : Ensure the Red/White RCA port on your TV labeled “AUDIO OUT”.
STEP 2 : Ensure the Soundbar Red/White end connect to the TV’Audio Output’ socket. Note: NOT’Audio Input’, ‘Video’, = ‘Video/Audio dual function’ or ANY other label!!
STEP 3: Short press and switch Soundbar audio source to Aux mode.
STEP 4: To gain optimal volume levels, adjust the volume level on both the TV and the Soundbar.

Aux In Mode

Fig 7.

STEP 1 : Connect Soundbar and your secondary device via 3.5mm audio cable
STEP 2: Short press and switch Soundbar audio source to Aux In mode (not supplied).
STEP 3 : Press the Play button on your secondary device to start playback through the Soundbar. STEP 4: To gain optimal volume levels, adjust the volume level on both the secondary device and on the Soundbar.

Bluetooth Mode

Fig 8.

STEP 1 : Long press and switch Soundbar audio source to Bluetooth mode.
STEP 2 : Short press to start pairing. bt will flash quickly when it is discoverable.
STEP 3: When found, the Soundbar will be displayed as ‘Audvoi! Select the device name to begin pairing.
Note: If your device requests a password, please enter ‘0000’ to complete the device pairing.
STEP 4 : When pairing is complete, a tone will sound and bt will change to be continuously on (not flashing). Note: Some TV Bluetooth is set to connect with other device such as console, not for Soundbar.

HDMI Mode

Fig 9.

STEP 1 : Ensure the HDMI cable is connected to the TV’HDMI ARC’socket.
Note: NOT’HDMI’ socket. Must be ‘HDMI ARC’socket.
STEP2: Short press and switch Soundbar audio source to HDMI mode.
STEP 3 : Set TV audio format to PCM. Set TV sound mode to Fixed or Standard.
STEP 4: Restart TV.

Bass or Treble enhancement The Bass and Treble settings each range from-5 to +5.

Press and release the Bass or Treble +or-button on the remote control to adjust the Bass or Treble as appropriate.

Note: The Bass and Treble will have no effect when you are using the EQ Movie’ setting.

Equaliser (EQ)

There are 5 EQ settings available on your Soundbar. These are Music*, Movie, Bass, News and Game.

Music is the default setting and your Soundbar will be set to this when you first use your product.

Press and release the relevant ‘Music’, ‘Movie’, ‘Bass’, ‘News’ or ‘Game’ EQ button on the remote control, as required.

Using your Soundbar

Let’s get started

Wall mounting your Soundbar You can wall mount your Soundbar. You will need:0

2 x rawl plugs of a type and size that are suitable for the wall that you will hang the Soundbar on. 2 rawl plugs have been supplied but please check that these are suitable for the wall surface that you will use.
Fig 10.
2 x screws that are the correct size for the rawl plugs. 2 screws have been supplied which are the correct size for the rawl plugs provided, but you will need to check that they will be sufficient for the wall surface that you will use.

**Fig 11.

**

You will also need to check that the screw heads fit and hold well into the wall mount points on the back of the Soundbar.
Notes:
Make sure that the screws and rawl plugs you use are suitable for supporting the Soundbar. To avoid damage to the Soundbar and personal injury, you should get a qualified person to drill the fixing surface and fit the appropriate wall fixings. When drilling into walls, always check that there are no hidden wires or pipes etc.

Before wall mounting your product, check the wall strength. If this is not clear, then consult relevant qualified personnel.

Take care not to allow the Soundbar to fall whilst attempting to hook it onto the screws you have fitted to hang the product onto.

Align the Soundbar in your chosen location and use a pencil to mark the drilling positions of 10.6 inches or 270 mm apart
(Fig 12).
Drill the holes as marked in point 1 above.
Push 2 rawl plugs into the holes. Insert 2 screws into the holes and tighten. Take care to leave enough space between the screw heads and the wall.
Fig 12.
Note. You will need to ensure that the screws head can fit into the wall mount points on the back of your Soundbar and that they are long enough to\ sufficiently grip into the rawl plugs and wall. You must also leave enough space between the screw head and the wall for the screw head to fit into the mounts.
Hang the Soundbar onto the screws. For secure mounting ensure the screw heads slide firmly into the narrow part of the wall mount fixings on the back of the Soundbar.
Fig 13

Warranty

Audvoi warrants this device for 6 months from date of the original purchase. If you have any issue with your purchase, please contact support@audvoi.com. We’ll be sure to respond within 12 hrs! According to our records, 98% customers are content with our solutions. We’ll be appreciate if you are willing to contact us to solve the problem instead of return directly. It’s our mission to improve our product and benefit every customer.

How to extend your warranty?

Other information

Helpful technical information

Technical specification

Power output	25W X2+50W
Frequency response	60Hz – 16KHz ± 3dB
Input sensitivity	1000mV (Aux in)
Main unit
Power supply	Input: 100-240V — 50-60Hz Output: 24V=2.5A
Power consumption	100W
Standby power consumption	<1W
Full range speaker drivers	Soundbar: 2.25″x 4 pcsSubwoofer : 5.25″x 1pcs
Dimensions	Soundbar: 8108266mm Subwoofer: 220120398mm
Mains cable length	1.5M
Remote control
Battery	2 x AAA
Bluetooth
Bluetooth compatibility	A2DP, AVRCP, HPE
Bluetooth version	V5.0
Pairing name	AUDVOI

How to Set up the Soundbar and TV?

Normally as below:Settings - >Audio->Digital Audio

More examples for various TV brands:

Samsung TV

Settings > Sound > Sound output > select Receiver (HDMI)
Settings > Sound > Expert Settings > Digital Output Audio Format > PCM
Settings > Sound > Sound Output > Expert Settings > Digital Output Audio Delay

ON
Settings > Sound > Sound Output > Expert Settings > HDMI ARC Mode > Auto

VIZIO TV

Settings > Audio > TV Speakers > Off
Settings > System > CEC > Enabled
Settings > Audio > Volume Level > Off
Settings > Audio >Surround sound>Off
Settings > Audio > Analog Audio Out>Fixed
Settings > Audio >Advanced Audio > Digital Audio Out > PCM

Sony TV

Settings > Display & Sounds > Audio Output > Speakers > Audio System
Settings > Display & Sounds > Audio Output > Digital Audio Out > PCM
Settings > Display & Sounds > Audio Output > Pass Through Mode > OFF
Settings Channels & Inputs > External inputs >BRAVIA Sync > BRAVIA Sync control > ON
Settings > Display & Sounds > Audio Output > e ARC Mode > On

LG TV

All Settings > General – Devices > HDMI Settings > SIMPLINK(HDMl – CEC)> ON
All Settings > Sound > Advances Settings > Digital Sound Output > PCM
All Settings > Sound > Sound Out > Use Wired Speaker > HDMI(ARC)Device

TCL ROKU TV

Settings > Audio > Audio output > Auto
Settings > Audio > Digital audio format > Select Stereo
Settings >Audio >TV Speakers >Select off
Hisense ROKU TV
Settings > Audio > TV Speakers > Select Disabled
Settings > Audio > Digital Audio out > Select Stereo

ONN ROKU TV

Settings > Audio > TV Speakers > Select Disabled
Settings > Audio > Digital Audio Format > Select Stereo
lnsignia Fire TV
Settings Display & Sounds > Audio Output > TV Speakers > select OFF
Settings Display& Sounds > Audio Output > Digital Audio Format > select PCM
Settings Display & Sounds > HDMI CEC Device Control >ON

Toshiba Fire TV

Settings > Display & Sounds > Audio Output > TV Speakers > select OFF
Settings > Display & Sounds > Audio Output > Digital Audio Format > select PCMSettings > Display & Sounds >
HDMI CEC Device Control > ON

Panasonic TV