DAKE WOD-7942 Hydraulic Press Owner’s Manual
- June 13, 2024
- DAKE
Table of Contents
- DAKE WOD-7942 Hydraulic Press
- HYDRAULIC LINES AND FITTINGS – 2022 and later
- HYDRAULIC LINES AND FITTINGS – 2022 and prior
- ELECTRIC SCHEMATIC
- HYDRAULIC SCHEMATIC
- EXPLODED VIEWS & PARTS LISTS
- 50 DA WORKHEAD DIAGRAM
- POWER UNIT REPLACEMENT PARTS
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
DAKE WOD-7942 Hydraulic Press
Here is the detailed product information for the press:
Manufacturer: Dake Corporation
Model: [Model Name] Address: 1809 Industrial Park Dr Grand Haven, MI
49417
Website: www.dakecorp.com
For presses manufactured in the year 2022 or later (Serial No. > WOD-7942),
the power unit, valve, hose, and fittings will be of a new configuration. The
valve control handle is in a left to right configuration. For presses made
prior to the year 2022 (Serial No. < WOD-7942), the valve control handle is in
an up & down configuration. Below is the breakdown of the updated components
for presses manufactured in 2022 or later: Item Description Part No. Qty
——————————————————- 1 Tube
Fitting, Elbow (3/8 x 3/8 NPTF) 72050 1 2 Tube Fitting, Straight (3/8 x 3/8
NPTF) 73425 1 3 Swivel Nut Elbow (3/8) 72047 1 4 Gauge 302939 1 5 Tube
Fitting, Straight (SAE 6) 69671 1 6 Tube Fitting, Elbow (SAE 3 Male x 1/4 NPT
Female) 302061 1 7 Branch Tee 302183 1 8 Adapter (3/8 SAE Male x 1/4 NPT
Female) 303124 1 9 Manifold 303946 1 10 Hose (1/4 x 54 long) 303948 2 For
presses made prior to the year 2022, the following components are used: Item
Description Part No. Qty ——————————————————- 1 Tube
Fitting, Elbow (3/8 x 3/8 NPTF) 72050 1 2 Tube Fitting, Straight (3/8 x 3/8
NPTF) 73425 1 3 Swivel Nut Elbow (3/8) 72047 1 4 Gauge 302939 1 5 Tube
Fitting, Straight (SAE 6) 69671 1 6 Tube Fitting, Elbow (SAE 6-6) 72402 1 7
Branch Tee 302183 1 8 Tube Fitting, Elbow (SAE 3 Male x 1/4 NPT Female) 302061
1 9 Manifold 302224 1 – Hose (3/8 x 54 long) 302201 2 Please note that the kit
contents may vary depending on the press model and configuration.
Now, let’s move on to the product usage instructions:
- Ensure that the press is placed on a stable and level surface.
- Connect the power unit, valve, hose, and fittings according to the configuration mentioned in the user manual based on the manufacturing year of the press.
- Make sure all connections are secure and tightened properly.
- If applicable, install the gauge in the designated location.
- Check the hydraulic power unit assembly and ensure it matches the specification mentioned in the user manual.
- For presses made in 2022 or later, use the updated hose and fittings kit (Items 1-3,5-8,10) and connect them to the power unit assembly (303898PU).
- For presses made prior to 2022, use the hose kit/valve kit (Items 1-9 & hoses x2) and connect them to the power unit assembly (301856PU).
- Refer to the electric schematic, hydraulic schematic, and exploded views & parts lists provided in the user manual for additional information.
- Ensure all warning labels are properly displayed on the press.
- Once all connections and configurations are completed, the press is ready for use.
Note: It is important to read and follow the complete user manual provided by the manufacturer for detailed instructions specific to your press model.
HYDRAULIC LINES AND FITTINGS – 2022 and later
If press was manufactured year 2022 or later (Serial No. > WOD-7942), power unit, valve, hose, and fittings will be of new configuration. Valve control handle left to right configuration. See below for updated components breakdown.
Item | Description | Part No. | Qty |
---|---|---|---|
1 | Tube Fitting, Elbow (3/8 x 3/8 NPTF) | 72050 | 1 |
2 | Tube Fitting, Straight (3/8 x 3/8 NPTF) | 73425 | 1 |
3 | Swivel Nut Elbow (3/8) | 72047 | 1 |
4 | Gauge | 302939 | 1 |
5 | Tube Fitting, Straight (SAE 6) | 69671 | 1 |
6 | Tube Fitting, Elbow (SAE 3 Male x 1/4 NPT Female) | 302061 | 1 |
7 | Branch Tee | 302183 | 1 |
8 | Adapter (3/8” SAE Male x 1/4 NPT Female) | 303124 | 1 |
9 | Manifold | 303946 | 1 |
10 | Hose (1/4 x 54” long) | 303948 | 2 |
KIT | Hose & Fittings Kit |
Items 1-3,5-8,10 (x2) Gauge sold separately. Valve & Manifold on power unit assembly 303898PU.| 303898KIT| –
HYDRAULIC LINES AND FITTINGS – 2022 and prior
For presses made year 2022 and prior (Serial No. < WOD-7942). Valve control handle up & down configuration. Refer to component breakdown below
Item | Description | Part No. | Qty |
---|---|---|---|
1 | Tube Fitting, Elbow (3/8 x 3/8 NPTF) | 72050 | 1 |
2 | Tube Fitting, Straight (3/8 x 3/8 NPTF) | 73425 | 1 |
3 | Swivel Nut Elbow (3/8) | 72047 | 1 |
4 | Gauge | 302939 | 1 |
5 | Tube Fitting, Straight (SAE 6) | 69671 | 1 |
6 | Tube Fitting, Elbow (SAE 6-6) | 72402 | 1 |
7 | Branch Tee | 302183 | 1 |
8 | Tube Fitting, Elbow (SAE 3 Male x 1/4 NPT Female) | 302061 | 1 |
9 | Manifold | 302224 | 1 |
– | Hose (3/8 x 54” long) | 302201 | 2 |
KIT | Hose/Fitting & Valve Kit (Items 1-9 & hoses x2) | 301856KIT | – |
ELECTRIC SCHEMATIC
HYDRAULIC SCHEMATIC
EXPLODED VIEWS & PARTS LISTS
Item | Description | Part No. | Qty |
---|---|---|---|
1 | Frame | 706943 | 1 |
2 | Hex Cap Screw (1/2”-13 x 1/4”) | 43356 | 4 |
3 | Channel Washer | 43657 | 4 |
4 | Workhead Assembly | 716547 | 1 |
5 | Lock Washer 1/2” | 43647 | 4 |
6 | Hex Nut 1/2”-13 | 43916 | 4 |
7 | Base Angle | 566 | 2 |
8 | Hex Cap Screw 1/2”-13 x 1” | 43349 | 4 |
9 | Table Pin | 569 | 6 |
10 | Retaining Ring | 43980 | 6 |
11 | Table Channel | 706945 | 2 |
12 | Lock Washer 1/2” | 43647 | 4 |
13 | Hex Nut 1/2”-13 | 43916 | 4 |
14 | Bolt 5/8”-11 x 10-1/2 | 79983 | 4 |
15 | Table Spacer | 86488 | 4 |
16 | Shackle | 301884 | 2 |
17 | Chain | 301881 | 2 |
18 | Spring Snap | 301882 | 4 |
19 | Eye Bolt | 301880 | 2 |
20 | Nose Piece | 87138 | 1 |
21 | Lock Washer 5/8” | 43648 | 4 |
22 | Hex Nut 5/8”-11 | 43917 | 4 |
23 | Hydraulic Power Unit | ||
(Serial No. < WOD-7942, prior to 2022) | 301856PU | – | |
23 | Hydraulic Power Unit (2022) Includes valve & manifold. (Serial No. > | ||
WOD-7942, 2022 and after) | 303898PU | 1 | |
24 | Hex Cap Screw 5/16”-18 x 1” | 43315 | 4 |
25 | Lock Washer 5/16” | 43644 | 4 |
26 | Hex Nut 5/16”-18 | 43911 | 4 |
28 | Pin Warning Label | 84487 | 1 |
29 | Pin Holes Warning Label | 84399 | 1 |
30 | Ganged Warning Label | 300168 | 1 |
31 | Lockout Procedure Label | 76462 | 1 |
32 | Voltage Warning Label | 84395 | 1 |
34 | Label – Made in USA | 76936 | 1 |
35 | Table Plate | 702 | 2 |
36 | V-Block (Not Included/Optional) | 336 | 2 |
37 | Dake Name Plate | 81003 | 1 |
– | Hose Kit/Valve Kit (Serial No. < WOD-7942, prior to 2022) | 301856KIT | – |
– | Hose Kit/Fittings Kit (Serial No. > WOD-7942, 2022 & after) | 303898KIT | 1 |
50 DA WORKHEAD DIAGRAM
ITEM | DESCRIPTION | PART NO. | QTY |
---|---|---|---|
A | Piston | 87135P | 1 |
B | Piston Guide | 87136P | 1 |
C | Cylinder | 87134P | 1 |
D | Socket Head Screw | 43485 | 8 |
E | Seal | 37044 | 1 |
F | T-Ring | 37048 | 1 |
G | Wear Ring | 37045 | 1 |
H | Wear Ring | 37046 | 1 |
J | T-Ring Deal | 17942 | 1 |
– | Workhead Assembly | 716547 | – |
Workhead repair kit 716578
Includes Items: E,F,G,H and J
POWER UNIT REPLACEMENT PARTS
If press was manufactured year 2022 or later (Serial No. > WOD-7942), power unit, valve, hose, and fittings will be of new configuration. See components below.
Description | Part No. |
---|---|
Motor | 303927 |
Run Capacitor | 303928 |
Starter Capacitor | 303929 |
Fan Cover | 303947 |
Relief Valve | 303930 |
4-Way Valve | 303931 |
Manifold | 303946 |
Solenoid Valve | 303945 |
Teflon Backing Ring | 303944 |
O-Ring | 303943 |
O-Ring | 303942 |
Transition Plate | 303941 |
Pump | 303940 |
Strainer | 303939 |
Plug (3/4 BSP) | 303938 |
Bonded Seal | 303937 |
Plug (3/4-12 BSP) | 303936 |
O-Ring for Reservoir/Tank | 303935 |
Reservoir – 3 Gallon | 303934 |
Full Hydraulic Unit (Except Motor) | 303933 |
Hose & Fittings Kit | 303898KIT |
Power Unit (Motor, Pump, Valves, Manifold) | 303898PU |
For presses made year 2022 and prior (Serial No. < WOD-7942). See components below.
Description | Part No. |
---|---|
Motor | 302235 |
Pump | 302994 |
Fan Cover | 302606 |
Capacitor Case | 302605 |
Capacitor | 302887 |
4-Way Valve | 301864A |
Fittings/Hose & Valve Kit | 301856KIT |
Power Unit | 301856PU |
Please contact factory for current prices.
ORDERING INFORMATION
Parts are available for direct purchase from Dake or through a distributor.
When placing a parts order, you will need to provide the part number, name of
part, and model number. All parts shipped F.O.B. Factory in Grand Haven, MI.