Microtech 141083111 Big Screen Ip54 Caliper User Manual

June 13, 2024
microtech

Microtech 141083111 Big Screen Ip54 Caliper

Product Information

Product Name: MICROTECH BIG SCREEN IP54 CALIPER MICROTECH

  • Calibration: ISO 17025:2017
  • Certification: ISO 9001:2015

Specifications:

Item No| Range| Resolution| Accuracy| Jaw Protection| Depth Rod| Battery| Functions
---|---|---|---|---|---|---|---
141083111| 0-150mm / 0-6 inch| 4×1.4mm| +/- 40/16mm| Carbide tips| mm calibration ISO17025| CR1632 3V battery| MM/INCH, ZERO, ON/OFF, DATA TRANSFER, AUTO WAKE UP & SWITCH
OFF
141083112| 0-200mm / 0-8 inch| 4×1.4mm| +/- 40/16mm| Carbide tips| mm calibration ISO17025| CR1632 3V battery| MM/INCH, ZERO, ON/OFF, DATA TRANSFER, AUTO WAKE UP & SWITCH
OFF
141083211| 0-300mm / 0-12 inch| 4×1.4mm| +/- 40/16mm| Carbide tips| mm calibration ISO17025| CR1632 3V battery| MM/INCH, ZERO, ON/OFF, DATA TRANSFER, AUTO WAKE UP & SWITCH
OFF
141083112C| 0-150mm / 0-6 inch| 4×1.4mm| +/- 40/16mm| Carbide tips| mm calibration ISO17025| CR1632 3V battery| MM/INCH, ZERO, ON/OFF, DATA TRANSFER, AUTO WAKE UP & SWITCH
OFF
141083212C| 0-200mm / 0-8 inch| 4×1.4mm| +/- 40/16mm| Carbide tips| mm calibration ISO17025| CR1632 3V battery| MM/INCH, ZERO, ON/OFF, DATA TRANSFER, AUTO WAKE UP & SWITCH
OFF
141083312C| 0-300mm / 0-12 inch| 4×1.4mm| +/- 40/16mm| Carbide tips| mm calibration ISO17025| CR1632 3V battery| MM/INCH, ZERO, ON/OFF, DATA TRANSFER, AUTO WAKE UP & SWITCH
OFF

Product Usage Instructions

Data Transfer:

– Use the optional USB cable (Item No 29919150) to connect the caliper to a Windows PC. The cable connection should be in keyboard mode using USB HID.

– After the connection is established, use the button on the USB cable to transfer data directly to the opened application.

– For more detailed information about the connection procedure,refer to the cable manual.

Warnings:

In the process of working with calipers, the following should be avoided:

  • Scratches on the measuring surfaces
  • Measuring the size of objects in the process of machining
  • Shocks or dropping, avoid bending of the rod or other surfaces

Recommendations:

  • MICROTECH innovative calipers
  • E-FORCE COMPUTERIZED CALIPERS (1-20N)
  • DOUBLE FORCE CALIPERS IP67 (8N)
  • PRECISION CALIPERS IP67
  • SWISS ELECTRONICS

Contact Information:

MICROTECH

61001, Kharkiv, Ukraine, str. Rustaveli, 39

  • Tel: +38 (057) 739-03-50
  • Website: www.microtech.ua
  • Email: tool@microtech.ua
  • Note: Product specifications and information are subject to change without prior notice.

SPECIFICATION

Item No| Range| Resolution| Accuracy| Jaw| Protection

class

| Digit

height

| Carbide

tips

| Depth

rod

| Calibration
---|---|---|---|---|---|---|---|---|---
| mm| inch| mm| inch| μm| mm| | mm| | mm| ISO17025
141083111| 0-150| 0-6”|

0,01

|

0,0005”

| ±20| 40/16|

IP-54

|

13,5

|

|

4×1,4

| +
141083112| +
141083211| 0-200| 0-8”| ±20| 50/17| +
141083212| +
141083311| 0-300| 0-12”| ±30| 60/20| +
141083312| +
MODIFICATION WITH CARBIDE JAWS
141083112C| 0-150| 0-6”| 0,01| 0,0005”| ±20| 40/16| IP-54| 13,5| +| 4×1,4| +
141083212C| 0-200| 0-8”| ±20| 50/17| +| +
141083312C| 0-300| 0-12”| ±30| 60/20| +| +

  • MAX ERROR FOR INTERNAL END DEPTH MEASUREMENTS ISO13385

BUTTONS

Microtech-141083111-Big-Screen-Ip54-Caliper-
fig-1

optional accesories

functions

MAIN INFO

  • Wipe with a clean cloth, soaked in gasoline, measuring surface of the frame and gauge calipers to remove anti-corrosion oil. Then wipe them with a clean dry cloth.
  • If necessary, open the battery cover; insert the battery (type CR1632) according to the polarity of the electrodes. Blinking display information or absence suggests replacing battery.
  • During the measurement, measuring jaws should to sum to the measured object without knocking.
  • During the measurement avoid warps of measuring surfaces of the instrument. Measuring surface must be fully in contact with the measurement object.

DATA TRANSFER

  • Use optional USB cable (Item No 29919150) for connection to Windows PC. Cable connection caliper to PC in keyboard mode, using USB HID.
  • After connection use button on USB cable to transfer data direct to opened application.
  • Extended info about connection procedure on cable manual.

WARNING!
IN THE PROCESS OF WORKING WITH CALIPERS SHOULD BE AVOIDED:

Scratches on the measuring surfaces; Measuring the size of object in the process of machining; Shocks or dropping, avoid bending of rod or other surfaces

RECOMENDATIONS

Microtech-141083111-Big-Screen-Ip54-Caliper-
fig-4

MICROTECH INNOVATIVE CALIPERS

E-FORCE COMPUTIERZED CALIPERSMicrotech-141083111-Big-Screen-Ip54-Caliper-
fig-5

DOUBLE FORCE CALIPERS IP67Microtech-141083111-Big-Screen-Ip54-Caliper-
fig-6

PRECISION CALIPERS IP67Microtech-141083111-Big-Screen-Ip54-Caliper-
fig-7

MICROTECH

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals