DAKE 1-1-2 Ratchet Lever Arbor Press Instruction Manual

DAKE 1-1-2 Ratchet Lever Arbor Press

Product Information

The DAKE Ratchet Lever Arbor Press is available in three models: 1-1/2, 1-1/2B, and 1-3/4. This press is designed for various applications and is manufactured by Dake Corporation, located at 1809 Industrial Park Dr, Grand Haven, MI 49417. For more information, visit their website at www.dakecorp.com.

Product Usage Instructions

WARNING! Before operating the DAKE Ratchet Lever Arbor Press, it is essential to read and understand all instructions and responsibilities. Failure to follow safety instructions and labels could result in serious injury.

Handle Position

The proper handle position is crucial for efficient and safe operation. Ensure that the handle is in the correct position before using the arbor press. Refer to page 8 of the instructional manual for detailed instructions on handle positioning.

Operation

Follow the steps below for proper operation of the DAKE Ratchet Lever Arbor Press:

1. Read and understand all safety instructions and labels before starting.
2. Ensure the handle is in the correct position as instructed in the manual.
3. Place the workpiece securely on the press bed.
4. Apply pressure on the handle to activate the ratchet lever mechanism.
5. Repeat the process as necessary to achieve the desired result.

For detailed operational instructions, refer to page 8 of the instructional manual.

Maintenance

Maintaining the DAKE Ratchet Lever Arbor Press is essential for its longevity and optimal performance. Follow the maintenance guidelines provided in the instructional manual on page 8. Regular maintenance includes:

• Inspecting the press for any signs of wear or damage.
• Cleaning the press and removing any debris.
• Tightening loose components, if necessary.

Lubrication

Lubricating the arbor press is crucial to ensure smooth operation. Follow the lubrication instructions provided in the instructional manual on page 8. Use the recommended lubricant and apply it to the specified areas as instructed.

Exploded View & Parts List

For a detailed breakdown of the arbor press components and parts, refer to page 9 of the instructional manual. The exploded view and parts list will help in identifying and ordering replacement parts if needed. The part numbers mentioned are 902001,
902002, and 902007.

DAKE STANDARD LIMITED WARRANTY

Dake Corporation provides a limited warranty for their products.
The warranty coverage includes:

Finished Machines

Dake warrants the finished machine to be free from defects in material and workmanship under normal use and service for a period of 1 year (12 months) from the delivery date to the end user.

Parts

Dake warrants the component parts to be free from defects in material and workmanship under normal use and service for a period of 30 days from the delivery date to the end user. Defective component parts will be replaced at no cost to the end user.

Sale of Service (Repairs)

Dake warrants the component part repaired by Dake Corporation at the manufacturing facility to be free from defects in material and workmanship under normal use and service for a period of 90 days from the return date to the end user, as it pertains to the repair
work completed. The repair of defective component parts is covered under the warranty at no cost to the end user.

Warranty Process

In case of any defects in materials or workmanship, the manufacturer will repair or replace the defective portion of the product. The manufacturer retains the sole right and option, after inspection, to determine whether to repair or replace defective equipment, parts, or components. Any defective parts replaced under this warranty will become the property of the manufacturer.

For warranty claims, contact the distributor or representative responsible for the sale. Once communication has been initiated, contact the Dake Customer Service Warranty Representative for approval:

• Phone: 800-937-3253
• Email: [email protected]

When contacting Dake, please provide the following information:

• Model number
• Serial number
• Sales order number

Purchasers who notify Dake within the warranty period will be issued a Case number and/or a Return Material Authorization (RMA) number. If requested by Dake, clearly write the RMA number on the exterior packaging when returning an item. Items shipped to Dake \without an RMA will not be processed.

Model 1-1/2, 1-1/2B and 1-3/4

WARNING!
Read and understand all instructions and responsibilities before operating. Failure to follow safety instructions and labels could result in serious injury.

DAKE STANDARD LIMITED WARRANTY

• Finished Machines
  Dake warrants to the original purchaser the finished machine manufactured or distributed by it to be free from defects in material and workmanship under normal use and service within 1 year (12 months) from the delivery date to the end user.

• Parts
  Dake warrants to the original purchaser the component part manufactured or distributed by it to be free from defects in material and workmanship under normal use and service within 30 days from the delivery date to the end user. The standard limited warranty includes the replacement of the defective component part at no cost to the end user.

• Sale of Service (Repairs)
  Dake warrants to the original purchaser the component part repaired by Dake Corporation at the manufacturing facility to be free from defects in material and workmanship under normal use and service within 90 days from the return date to the end user, as it pertains to the repair work completed. The standard limited warranty includes repair of the defective component part, at no cost to the end user.

• Warranty Process

  • Subject to the conditions hereinafter set forth, the manufacturer will repair or replace any portion of the product that proves defective in materials or workmanship. The manufacturer retains the sole right and option, after inspection, to determine whether to repair or replace defective equipment, parts or components. The manufacturer will assume ownership of any defective parts replaced under this warranty.

  • All requested warranty claims must be communicated to the distributor or representative responsible for the sale. Once communication has been initiated, the Warranty Representative at Dake Customer Service must be contacted for approval:
    Phone: 800-937-3253
    Email: [email protected]
    When contacting Dake, please have the following information readily available: – Model # – Serial # – Sales Order #

  • Purchasers who notify Dake within the warranty period will be issued a Case number and/or a Return Material Authorization (RMA) number. If the item is to be returned per Dake’s request, the RMA number must be clearly written on the exterior packaging. Any item shipped to Dake without an RMA will not be processed.

Warranty Exceptions:
The following conditions are not applicable to the standard limited warranty:

• a) Part installation or machine service was not completed by a certified professional, and is not in accordance with applicable local codes, ordinances and good trade practices.
• b) Defects or malfunctions resulting from improper installation or failure to operate or maintain the unit in accordance with the printed instructions provided.
• c) Defects or malfunctions resulting from abuse, accident, neglect or damage outside of prepaid freight terms.
• d) Normal maintenance service or preventative maintenance, and the parts used in connection with such service.
• e) Units and parts which have been altered or repaired, other than by the manufacturer specifically authorized by the manufacturer.
• f) Alterations made to the machine that were not previously approved by the manufacturer, or that are used for purposes other than the original design of the machine.

RETURN & REFUND POLICY

Thank you for purchasing from Dake! If you are not entirely satisfied with your purchase, we are here to help.

Returns

• All Dake manufactured / distributed machines and parts include a 30-day return option. These policies are valid from the date of final shipment to the end user.
• To be eligible for a return, the item must be unused and in the same condition as received.
• All requested warranty claims must be communicated to the distributor or representative responsible for the sale. Once communication has been initiated, Dake Customer Service must be contacted for approval by the distributor or representative: Phone: 800-937-3253 Email: [email protected]
• Once the return request has been approved by Customer Service, a representative will supply a Return Material Authorization (RMA) number. The returned item must have the provided RMA number clearly marked on the outside packaging. Any item received without an RMA number clearly visible on the packaging will not be processed. An RMA number can only be provided by the Dake Customer Service team and must be obtained prior to the return shipment.
• The item must be shipped and received back to Dake within 30 days from being issued the RMA number, or the return will be void and nonreturnable.

Refunds

• Once the item has been received and inspected for damages, a representative will notify the requestor referencing the provided RMA number.
• If the return is approved, a refund will be issued to the original method of payment, less a 20% restocking fee. The restocking fee may be waived if an order is placed at the time of return with like-value merchandise.
• Transportation costs are the responsibility of the end user and will not be credited upon return approval.
• Any item that is returned after the initial 30 days or has excessive/obvious use will not be considered for a full refund.

DAKE STANDARD TERMS & CONDITIONS OF SALE

All proposals and quotations for the original sale of our products are subject to the following terms and conditions:

• ACCEPTANCE OF ORDER: All orders are subject to acceptance by Dake at its main office in Grand Haven, Michigan.

• APPLICABLE LAWS: This quotation or acceptance shall be governed in all respects by the laws of the State of Michigan.

• CANCELLATION: We reserve the right to cancel and/or refuse to complete your order if, in our opinion, you have not established credit to promptly meet the payment terms of your order. Any cancellation from the Purchaser may be subject to a 10% cancellation fee for any of our non-standard machinery upon the discretion of Dake. All custom or special quotes will not be eligible for cancellation, nor returns.

• DELIVERY: The proposed shipment date is an estimate and is contingent upon causes beyond Dake’s control. Under no circumstances shall Dake have any liability for loss of use or for any direct or consequential damages resulting from delay. All shipments from the Dake facilities are F.O.B.

• FREIGHT CLAIM: Damage freight claims must be submitted to Dake within thirty (30) days of shipment from Dake’s facility. If shipment for order was set up by the Purchaser, Dake is not liable to handle the freight claims.

• PERMITS AND COMPLIANCE: Dake shall not be responsible for obtaining any permits, inspections, certifications, or licenses required for the installation or use of the equipment. Dake makes no promise or representation that the equipment or any services to be furnished by Dake will conform to any federal, state, or local laws, ordinances, regulations, codes or standards.

• PRICES: Unless otherwise agreed to in writing, all prices are F.O.B. our plant in Grand Haven, Michigan and Grand Prairie, Texas. In any event, the quoted prices for component parts become invalid ten (10) days after date of quotation, and machinery may become invalid sixty (60) days after date of quotation. Unless otherwise specified in Dake’s quotation, installation services and final on-site adjustments are not included in the quotation.

• TAXES: Prices do not include taxes. If any sales, use or similar tax is payable to Dake in connection with any transaction or part thereof between the Purchaser and Dake with respect to goods delivered, the Purchaser will, upon demand, pay to Dake the amount of any such tax. If you are tax exempt, please include your exemption document when submitting your order.

• TERMS OF PAYMENT: Terms of payment are as stated in Dake’s quotation subject to credit approval by our home office. Dake will invoice Purchaser when the equipment is completed and ready for shipment. Payment terms run from invoice date. Purchaser may be required to issue a down payment before production of order and shipment, at the discretion of Dake Accounting. For credit card purchases, a 3.5% processing fee may be applicable to the order. The following states are exempt from the 3.5%

• processing fee: CA, CO, KS, OK, TX, FL, NY, CT, MA, and ME. Dake’s preferred method of payment is as follows: ACH Wire and credit card. Checks will be accepted but may cause delay in order processing. Below is our billing address:
  1809 Industrial Park Drive, Grand Haven, MI 49417

• WARRANTY If , within a period of one (1) year from date of shipment, any part of any equipment sold by Dake is defective in material or workmanship and is so found after inspection by Dake, it will be replaced or repaired at the option of Dake, providing the equipment has been given normal and proper usage and is still the property of the original Purchaser. Purchased components such as Micro Drop mist system or the like, installed as a part of Dake equipment are warranted only to the extent of the original Manufacturer’s warranty. Dake is not responsible for any service work performed unless authorized in advance.
  THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER WRITTEN, ORAL OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE). UNDER NO CIRCUMSTANCES SHALL DAKE BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.

SPECIFICATIONS

Model| 1- 1/2| 1- 1/2B| 1- 3/4
---|---|---|---
Number| 902001| 902002| 902007
Capacity| 3 tons| 3 tons| 3 tons
Leverage ration| 48:1| 48:1| 48:1
Ram size| 1-1/4” x 1-1/4” x 16-1/2”| 1-1/4” x 1-1/4” x 24-1/2”| 1-1/4” x 1-1/4” x 16-1/2”
Max diameter work| 14”| 14”| 14”
Throat| 7”| 7”| 7”
Largest arbor| 2”| 2”| 2”
Capacity over table| 11-1/2”| 18-1/4”| 11-1/2”
Capacity over table plate| 10-3/4”| 17-1/2”| 10-3/4”
Base length| 18”| 21”| 12-1/2”
Base width| 7-1/4”| 8-1/4”| 6”
Height| 19”| 28”| 24-3/8 ”
Weight| 145 lbs| 196 lbs| 125 lbs

SAFETY

This is the safety alert symbol. When you see this symbol on your press be alert to the potential for personal injury.
Employer is responsible to perform a hazard/PPE assessment before work activity.

WARNING: This product contains Nickel, a chemical known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Follow recommended precautions and safe operating practices.

• Carefully read all safety messages in these instructions and on your press safety signs. Keep safety labels in good condition. Replace missing or damaged safety labels.
• This machine is intended to be operated by one person. This person should be conscious of the press ram movement not only for themselves but also for persons in the immediate area of the machine.
• Under no circumstances increase the leverage ratio of the press by using a longer handle or by placing a pipe over the handle. Never hammer on top of the ram.

HANDLE POSITION

CAUTION: NEVER PULL THE PRESS HANDLE PAST THE HORIZONTAL POSITION! To avoid personal injury and damaging the press only pull until the handle is horizontal, then return the handle back up as far as it allows before bringing the handle back down. This ensures that the pawl fully engages with the gear teeth to prevent tooth damage and gear slippage that can cause harm to the machine and worker. Examples above show the proper minimum and maximum handle positions.

OPERATION

• Handwheel: The handwheel (item 18) can be turned to raise or lower the ram to and from the workpiece without exerting force on the workpiece.
• Handle: The handle (item 9) can be used to lower the ram to exert force onto the workpiece. See safety instructions for more information on handle position.

MAINTENANCE

LUBRICATION

• Keep all working parts of the press well-oiled for easier operation.
• Keep a light film of oil over the entire surface of the ram to prevent rust.

EXPLODED VIEW & PARTS LIST

EXPLODED PARTS VIEW

MODEL 1-1/2 PARTS LIST

Please contact factory for current prices.

ORDERING INFORMATION

Parts are available for direct purchase from Dake or through a distributor. When placing a parts order, you will need to provide the part number, name of part, and model number. All parts shipped F.O.B. Factory in Grand Haven, MI.

MODEL 1-1/2B PARTS LIST

Please contact factory for current prices.

ORDERING INFORMATION

Parts are available for direct purchase from Dake or through a distributor. When placing a parts order, you will need to provide the part number, name of part, and model number. All parts shipped F.O.B. Factory in Grand Haven, MI.

MODEL 1-3/4 PARTS LIST

Please contact factory for current prices.

ORDERING INFORMATION

Parts are available for direct purchase from Dake or through a distributor. When placing a parts order, you will need to provide the part number, name of part, and model number. All parts shipped F.O.B. Factory in Grand Haven, MI.

Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com

References

• Dake Corp | Metalworking Machine Tools

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>