smart solar 1020908 Gonk Figure Light Instruction Manual

smart solar 1020908 Gonk Figure Light

INTRODUCTION

Solar lights work by using power generated by the solar panel to charge internal batteries. These batteries are then used to power the light. When switched on the lights automatically illuminate at night by using a light sensor. The duration of illumination will depend on the amount of sunlight and therefore charge received by the batteries.

CONTENTS

Design may vary.

CHANGE BATTERY

BATTERY SPECIFICATION

1 x 1.2V AAA Ni-Mh 4OOmAh battery required (included).

BATTERY DISPOSAL

Dispose of batteries according to local regulations.

PROBLEM SOLVING

1. Check the solar panel is positioned correctly.
2. Check the battery and boost charge as described.
3. If problems persist contact customer services.

1 YEAR WARRANTY

Email: uksupport@sgpuk.com

Tel: +44 (0)1443 843306

www.sgpuk.com
Smart Garden Products Ltd., 2 Pentagon South, Barton Lane, Abingdon, Oxfordshire, OX14 3PZ 9 Rue de Conde, 33000 Bordeaux, France

FUNCTION

• * (W)White

  • (C) Colour changing
  • (0) Off
• • 1 White and Colour Changing LED
• • Outdoor use.
    • No mains required.

• Rechargeable batteries become less efficient with repeated charge-discharge cycles and the battery capacity reduces. If battery becomes less efficient try boost charging it by leaving in the off position for 3 to 5 sunny days to allow the maximum charge to the battery.

• Leave switch in “OFF” position for 2 sunny days.
  To access switch, unscrew the glass ball and the switch is on the solar module – switch function:
  White -Colour Changing – OFF

PERFORMANCE

POSITION

Position the solar panel to receive the maximum amount of sunlight

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>