bol com AT-02 Smart Wireless BBQ Thermometer User Manual

bol com AT-02 Smart Wireless BBQ Thermometer

Get to know the device

Put in the Battery

2 AA size batteries are needed for this device. Make sure they are put in fhe right direction by following the icons on the unif.

1. Slide the battery cover to open.
2. Put in batteries, noticing the icons which show directions.
3. Slide back the battery cover.

Install the probes

The device will keep scanning the sockets when its power is switched on, the Probe icons on LCD will display one by one from1 to 4 where probes plugged in. Then insert the probes into the food, make sure the front tip of the probe is in the center of the food to get accurate temperature.

Screen introduction

How to install

STEP 1: Remove The Original Analog thermometer

STEP 2: Install the New Smart Wireless thermometer on the lid

Download the APP

Search the keyword ToGrill’ in Appstore or Google Play, scan the following OR code with your phone. Download and install it for free. Make sure your phone meets the requirements:
iOs devices running version 11.0 or later Android devices running version 5.0 or later

Power ON/OFF

• Press and hold the button for more than 3 seconds when it is in OFF mode, it will be powered on. And the LCD display will show’ON’.
• if you do the same when it is in ON mode, it will be powered off.
• When there is no probe inserted in the device, it will be powered off automatically.

Activate device and pair with your phone

1. Switch on your device and keep the blue-tooth switch of your phone on.
2. Activate device:
   • Launch the‘ToGrill’ app,
   • Enable mobile phone permissions
   • Follow the instructions in the app
3. Pairing:
   • Chose the product you have on app
   • Press the Pairing/Stop Alarm Button
4. Connected successfully.
   Once Paired the device with your phone, you don’t need fo do it again, unless you change to other phones.

Enjoy your barbecue time

Choose food type and preference for the food where each probe is inserted, the app and the device will display its current and tagert temperature. When the food is ready, the app and the device will alarm.

The user interface of the app may be changed when upgrade. Please follow the instructions in the app.

Probe color configuration It’s difficut for you to distinguish different probes when you have several probes in using in the same time. The app provides 6 colors for each channel, which enables users set them to be identical to the color of the probes. The probes come in 6 colors as well.

WARNING

The heat resistance varies in different components of the probe, DO NOT put the probes directly in fire flame. DO NOT put the wrap into oven, or it will melt! And robes are NOT dishwasher safe.

Attention: Temp Probes above for reference only,subject to the actual probes.

App Store is a service mark of Apple Inc. Google Play is a service mark of Google Inc:

FCC Caution.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not Cause harmful interference, and (2) this device must accept any inferference received, including interterence fhat may cause undesired operation.

15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the User’s authority to operate the equipment.

15.105 Information to the user.
Note: This equipment has been fested and found fo comply with the limits for a Class B digifal device, pursuant fo part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installafion. Ihis equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfere ence to radio communications. However, there is no guarantee that inferference will not occur in a parficular installation. If this equipment does cause harmful inferference fo radio or
television reception, which can be determined by furning the equipment off and on, the user is encouraged to try to correct the inferference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separafion beftween the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>