smart solar MULTISPOT 10-PK 5 Lumen Outdoor Spotlights Instruction Manual
- June 12, 2024
- Smart Solar
Table of Contents
SOLAR POWERED
MULTISPOT 10-PK
INTRODUCTION
Solar lights work by using power generated by the solar panel to charge
internal batteries.
These batteries are then used to power the light. When switched on the lights
automatically illuminate at night by using a light sensor. The duration of
illumination will depend on the amount of sunlight and therefore charge
received by the batteries.
CONTENTS
Design may vary.
This is nota toy. Keep away from children and pets.
FUNCTION
| (ON) White
(OFF) Off
---|---
| 10WhiteLEDs
| Outdoor use.
| No mains required.
| Rechargeable batteries become less efficient with repeated charge-discharge
cycles and the battery capacity reduces. If battery becomes less efficient try
boost charging it by leaving in the off position for 3 to 5 sunny days to
allow the maximum charge to the battery.
FIRST USE
Leave switch in “ON” position for 2 sunny days.
PERFORMANCE
| Spring
| Summer
| Autumn
| Winter
---|---|---|---|---
Light run time| 2-4h| 2-6h| 2-4h| 0-2h
POSITION
Position the solar panel to receive the maximum amount of sunlight.
Do not position under bright light as this will prevent the light switching on at night.
CHANGE BATTERY
BATTERY SPECIFICATION
1×3.7V Lithium 18650 1800mAh battery required (included).
BATTERY DISPOSAL
Dispose of batteries according to local regulations.
PROBLEM SOLVING
- Check the solar panel is positioned correctly.
- Check the battery and boost charge as described.
- If problems persist contact customer services.
1 YEAR WARRANTY
Email: uksupport@sgpuk.com
Tel: +44 (0)1443 843306
www.sgpuk.com
Smart Garden Products Ltd., 2 Pentagon South, Barton Lane, Abingdon,
Oxfordshire, OX14 3PZ
9 Rue de Condé, 33000 Bordeaux, France
1004013
©Smart Garden Products Ltd. 2022
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>