smart solar 1004013 5L Set of 10 Black Spike Solar Instruction Manual

smart solar 1004013 5L Set of 10 Black Spike Solar

INTRODUCTION

Solar lights work by using power generated by the solar panel to charge internal batteries. These batteries are then used to power the light. When switched on the lights automatically illuminate at night by using a light sensor. The duration of illumination will depend on the amount of sunlight and therefore charge received by the batteries.

CONTENTS

This is not a toy. Keep away from children and pets.

FUNCTION

• (ON) White (OFF) Off
• 10 White LEDs
• Outdoor use.
• No mains reauired.
• Rechargeable batteries become less efficient with repeated charge-discharge cycles and the battery capacity reduces. If battery becomes less efficient try boost charging it by leaving in the off position for 3 to 5 sunny days to allow the maximum charge to the battery.

FIRST USE

Leave the switch in “ON” position for 2 sunny days.

PERFORMANCE

POSITION

• Position the solar panel to receive the maximum amount of sunlight.
• Do not position under bright light as this will prevent the light from switching on at night.

CHANGE BATTERY

BATTERY SPECIFICATION

• 1 x 3.7V Lithium 18650 1800mAh battery required (included).

BATTERY DISPOSAL

Dispose of batteries according to local regulations.

PROBLEM-SOLVING

1.  Check the solar panel is positioned correctly.
2. Check the battery and boost the charge as described.
3. If problems persist contact customer services.

1 YEAR WARRANTY

• Email: [email protected]
• Tel: +44 (0)1443 843306

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>