SWISS TIMING BOREAS 2 Sides Concentration Clock User Manual

SWISS TIMING BOREAS 2 Sides Concentration Clock

Specifications

• Model: BOREAS 2 SIDES
• Version: 1.0
• Date: September 2023
• Manufacturer: Swiss Timing
• Contact: Phone +41 32 488 36 11, Email: [email protected]
• Website: www.swisstiming.com

Product Usage Instructions

Caution and Safety Precautions

• Never use any other charger than the supplied or a type approved by Swiss Timing.
• Never bypass a power cord ground lead.
• Do not plug a power cord into the AC power source until proper installation procedures have been followed.
• Protect the equipment against splashing, rain, and excessive sun rays.
• Verify the selection of the power distribution and voltage compatibility.

Environment

• This product should not be disposed of with household waste.
• It has to be returned to a local authorized collection system for recycling.

Getting Started

• Charging the Battery: Follow the instructions provided for charging the battery.
• Power ON: Ensure proper power connections before turning on the device.

Operation

• Countdown / Wind Mode: Instructions for using the countdown or wind mode feature.
• Lap Counter Mode: Details on using the lap counter mode.

Electrical Properties

• Power Supply: Information on the power supply requirements.
• BOREAS Connectors Pinning: Details on the connectors pinning for proper connections.

FAQ

Q: Can I use a different charger with the BOREAS 2 SIDES?

• A: No, only use the charger supplied or one approved by Swiss Timing to avoid damage.

Q: What should I do if the device is damaged?

• A: Do not use the device if it is damaged or insecure. Contact Swiss Timing for assistance.

Q: How do I dispose of the product?

• A: Do not dispose of it with household waste. Return it to a local authorized collection system for recycling.

Caution and safety precautions

• Never use any other charger than the supplied or a type approved by Swiss Timing. This could destroy the battery, cause damage to the unit, and possibly cause personal injury due to fire or/or electrical shock.
• Never bypass a power cord ground lead by breaking off the ground pin, or by using inappropriate extension cords or adapters.
• Never plug a power cord into the AC power source until you have made sure that all installation, cabling, and power levels, are proper, and that the applicable procedures in this manual have been followed.
• Protect the equipment against splashing, rain, and excessive sun rays.
• Never use the device if it is damaged or insecure.
• Verify the selection of the power distribution.
• Verify that the voltage quoted on the rating plate is the same as your voltage. Connect the appliance only to power sockets with protective earth. The use of an incorrect connection voids the warranty.
• This program may be modified at any time without prior notification.
• Do not open the case; there is nothing that needs servicing inside it. Nevertheless, if the case must be opened, you must call for some qualified personnel. The power supply cable must be disconnected before opening the case.
• During the transport of all Swiss Timing equipment delivered with a reusable carry case, the said case should be used at all times. This is imperative to limit the damage, such as shocks or vibrations that can be caused to the units during transport.
• The same cases should also be used when returning equipment to Swiss Timing for repair. Swiss Timing reserves the right to refuse all guarantees if this condition is not fulfilled.
• If the installation includes a horn, be sure to maintain a sufficient security distance from the public.

Documentation Updates

• Swiss Timing SA reserves the right to make improvements in the products described in this documentation at any time without prior notice.
• Furthermore, Swiss Timing SA reserves the right to revise this documentation in its content at any time and without any obligation to notify any person or organization of such revision.

Disclaimer

• The information provided in this documentation has been obtained from sources believed to be reliable, accurate, and current.
• However, Swiss Timing SA makes no representation or warranty, express or implied, to, but not limited to, the completeness, accuracy, correctness, and actuality of the content of this documentation.
• Swiss Timing SA specifically disclaims any implied warranty of merchantability, quality, and/or fitness for any particular purpose.
• Swiss Timing SA shall not be liable for errors contained in this documentation or for incidental or consequential damages in connection with the supply, performance or use of this documentation.

Environment

• This symbol indicates that this product should not be disposed of with household waste. It has to be returned to a local authorized collection system.
• By following this procedure you will contribute to the protection of the environment and human health. The recycling of the materials will help to conserve natural resources.

INTRODUCTION

• The BOREAS display is a concentration clock and when connected to a SIROCCO wind gauge will display the wind speed.
• When connected to a SCAN’O’VISION photo-finish camera, the wind speed can be automatically measured and displayed (without a field operator).
• The BOREAS can also be used as a lap counter which makes it a real all-in-one compact field display.
• The BOREAS 150 (double side clock) has 15 cm digits (viewing distance up to 80m).
• A light sensor automatically adapts the display brightness to the ambient light conditions to provide the optimum readability.
• The brightness can also be manually chosen within 15 steps.
• An internal battery provides 8 hours of autonomy.
• An internal horn provides sound at an intermediate time and the end of the concentration clock.

GENERAL VIEW

Display

Connections

Description

• ON/OFF On / Off switch
• DH/TV RS422 serial transmission
• TRIPOD Tripod fixing
• WINDSONIC SIROCCO wind sensor connection
• POWER Battery charger connection
• KEY 20 Controller connection

Installation instruction

• The BOREAS double-sided can be installed on a tripod (3/8” UNC thread).

GETTING STARTED

Charging the battery

• A battery charger can be plugged into a POWER connector.
• The BOREAS doesn’t need to be switched on for charging to take place, but it is possible to charge the BOREAS during its use.
• The charger also acts as an external power when the BOREAS is in use.
• If the BOREAS is switched off and the battery is completely discharged, a complete charge lasts about 7 hours.

Power ON

• Connect the keyboard console to the KEY20 connector on the scoreboard.
• Switch on the scoreboard by pressing the ON/OFF button (‘I’ position).
• As soon as the scoreboard is powered, the keyboard displays the software version of the keyboard and the scoreboard:
• After a few seconds, the main menu is automatically displayed.

OPERATION

Countdown / Wind Mode

• In the main menu, press the “1” key to enter the Countdown mode.
• If you want to modify the default settings, press the “Enter” key in the main menu
• The value of the countdown is displayed on the keyboard (left) and on the scoreboard.
• The value of the countdown can be changed by using the numeric keys (the new value is displayed on the 2nd line of the screen) and validated by the “Enter” key.
• The value of the duration of wind acquisition is displayed on the keyboard (right).
• The value of the duration of wind acquisition can be changed by entering Settings on the main menu.
• Press the “Start/Stop” key to start the countdown and press again on this key to stop the countdown.
• Press the “Start Wind” key to start the acquisition of the wind and after 10 seconds the value of the wind will be displayed on a keyboard and the scoreboard.
• When the countdown comes to 15s, the internal horn sounds quickly 3 times (yellow flag).
• When the countdown comes to 0s, the internal horn sounds longer 1 time (red flag).
• Press the “Shift + ESC” keys to return to the main menu.

Lap counter Mode

• In the main menu, press the “3” key to enter the Lap Counter mode.
• If you want to modify the default settings, press the “Enter” key in the main menu
• The number of laps to go is displayed on the keyboard and scoreboard.
• Press the key to increase the number of laps.
• Press the key to decrease the number of laps.
• The number of laps can be introduced by using the numeric keys (the new value is displayed on the 2nd line of the screen) and validated by the “Enter” key.
• While being in the concentration or lap counter mode, it is possible to modify the scoreboard luminosity:
• Press Shift + to increase the scoreboard luminosity or “Shift” + to decrease the scoreboard luminosity.
• The luminosity can be selected from 1 (lowest) to 15 (highest). If the luminosity is set to 0 (= AUTO), it is automatically adjusted according to the light sensor.
• Press the “Shift + ESC” keys to return to the main menu.

SETTINGS

In the main menu, press the “Enter” key to enter the Settings of the scoreboard.

CONCENTRATION DEFINITION

• Press the “1” key to enter the Countdown settings and use the keys to switch between different settings.
• The default values are set in brackets ().

Concentration time definition

• The value of the duration of concentration time can be changed using the numeric pad on the keyboard and validated by the “Enter” key.

Concentration time mode

• The mode of concentration time (count down or count up) can be changed using the “Mode” key on the keyboard and validated by the “Enter” key.

Yellow flag (remaining time)

• The value of the remaining time can be changed using the numeric keys on the keyboard and validated by the “Enter” key.

Yellow flag with or without horn

• The mode with or without the horn of the remaining time can be changed using the “Mode” key on the keyboard and validated by the “Enter” key.

Duration of red flag horn (end time)

• The value of the duration of the red flag horn can be changed using the numeric keys on the keyboard and validated by the “Enter” key.

Displaying Time Wind

• The duration of displaying wind value can be changed using the numeric keys on the keyboard and validated by the “Enter” key.

WIND DEFINITION

• Press the “2” key to enter the wind definition settings.
• The value of the duration of wind acquisition can be changed using the numeric keys on keyboard and validated by the “Enter” key.

LAP COUNTER DEFINITION

• Press the “3” key to enter the lap counter definition settings.
• The value of the number of laps can be changed using the numeric keys on keyboard and validated by the “Enter” key.

DEFAULT SETTINGS

1.00 min
Concentration time mode| UP – DOWN| DOWN
Yellow flag (remaining time)| 0 – 9.99 min| 15.0 s
**** Yellow Flag and Horn| BUZZER  —  Yflag

yes                     yes

no                      yes

no                      no

| Yes / Yes
Red flag (end time) and Horn| 0 – 9.99 min| 3.0 s
Displaying time wind| 0 – 9.99 min| 15.0 s
Wind definition (2)| | 1=5 s

2=10 s

3=15 s

| **** 2
Lap counter (3)| Number of laps| 0 – 999| 0

ELECTRICAL PROPERTIES

Power supply

• The BOREAS two-sided contains a 12V PB battery.
• For the recharge, only use the charger provided (universal entry 100 to 240VAC, 50-60Hz).

BOREAS Connectors pinning

SPECIFICATIONS

BOREAS 150

Version History

• Swiss Timing LTD
• P.O. Box 138, Rue de l’Envers 1 CH-2606 Corgémont – Switzerland
• Phone +41 32 488 36 11
• [email protected]
• www.swisstiming.com
• Copyright
• © Swiss Timing SA
• All rights reserved.
• This documentation may not, as a whole or in part, be copied, translated, reproduced, transmitted or reduced, and/or stored in any electronic medium or machine-readable form without the prior written consent of Swiss Timing SA

References

• Swiss Timing - Swiss Timing

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>