smart solar 365 Solar Whitehall Lamp Post Instructions
- June 13, 2024
- Smart Solar
Table of Contents
365 SOLAR WHITEHALL LAMP POST
INTRODUCTION
Solar Lights work by using electricity generated by the solar panel to charge internal batteries. These batteries are then used to power the light. When switched on the lights automatically illuminate at night by using a light sensor. The duration of illumination will depend on the amount of sunlight and therefore charge received by the batteries.
CONTENTS
FUNCTION
| (SEMI) Minimum light output-SO lumen (Intelligent) (OFF) Off (FULL) Maximum
light output-100 lumen (Intelligent)
---|---
| 2 white LEDs.
|
Outdoor use only.
| No mains required.
| Rechargeable batteries become less efficient with repeated charge-discharge
cycles and the battery capacity reduces.
PERFORMANCE
In intelligent mode| Spring
| Summer
| Autumn
| Winter
---|---|---|---|---
Semi| 40
Lumen| 50
Lumen| 30
Lumen| 15
Lumen
Full| 60-80
Lumen| 80-100
Lumen| 30-60
Lumen| 30
Lumen
POSITION
Position the solar panel to receive the maximum amount of sunlight.
Do not position under bright light as this will prevent the light switching on at night.
CHANGE BATTERY
BATTERY SPECIFICATION
1 x 3.7V 18650 Li-ion 2000mAh battery required (included).
BATTERY DISPOSA
Dispose of batteries according to local regulations.
PROBLEM SOLVING
- Check the solar panel is positioned correctly.
- Check the battery is positioned correctly.
- If problems persist contact customer services.
1 YEAR WARRANTY
Email: uksupport@sgpuk.com
Tel: +44 (0)1443 843306
www.sgpuk.com
Smart Garden Products Ltd 2 Pentagon South, Barton Lane. Abingdon,
Oxfordshire, OX14 3PZ 9 Rue de Cond6,33000 Bordeaw, France
1009008
©Smart Garden Products 2021
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>