Gigo 1139 Children’s Play Gym Instruction Manual
- June 13, 2024
- Gigo
Table of Contents
BABY KIT
#1139
DEVELOP
• Can make a slide or furniture.
• Safe & Tough!
• 10 different models can be build!
• Environmental protection! Children’s Play Gym
Instruction Manual
• Locking joints disassemble in seconds using included
pliers!
Eft Parental or guardian’s supervision required!)
1139 Children’s Play Gym
PARTS LIST
ASSEMBLY & DISASSEMBLY
- How to Assemble & Disassemble Tube and Connector
Note:
Do not hold tube and connectors where you insert each piece as finger may be
pinched.
-
Push the connector into tube and turn the tube until a “click” is heard.
-
Finish the assembly of both connectors with the tube in between. Then insert the connectors into two separate tubes to complete a panel. (Fig. 3-1)
**** Do not assemble the tubes and connectors one by one. (Fig. 3-2) -
Put release pliers into holes that have safety lock pins coming through and squeeze the pliers to release the tube from the connector.
- How to fix square flat onto tube frame
- Use fixture and screw to fix square flat onto tube frame and then screw them together with T wrench as Fig. 5 shows.
- How to Fasten the Slide
(1) After the model is constructed make sure to fasten all the ends of slide to the tubes with the tube screws and screw driver as Fig. 6-1 shows or double screw driver as Fig. 6-2 shows.
(2) Double Locking Tube (300mm/Red) is the part used to
fix the bottom of slide, the nuts on the tube are fixed in a definite angle.
If the tube is misplaced, the tube screws can’t fasten the tube to the bottom
of slide in a proper condition. Please do place Double Locking Tube correctly
as Fig. 7-1 shows while assembly.
- The Double Locking Tube must be placed so that the arrow mark on the label would face upward when it is looked from inside of the model. Please refer to the Fig. 7-2.
- Fasten the Double Locking Tube to the bottom of slide with 2 tube screws and double screw driver.
Safety notice
Parents or guardians must read the instruction manual and the following notice
carefully before use in order to assure safety. And retain them for future
reference.
-
Notice for assembly and settlement
• Parents or guardians must read the instruction manual carefully and assemble gyms accordingly.
• During assembly, be sure to keep small parts away from young kids so that they would not be swallowed.
• The gyms are specially designed for indoor use. Please settle it on a flat floor.
• Don’t settle gyms near a stove or fire. -
Notice for use
• To be used only under parental or guardian’s supervision.
• To inspect tubes, connectors and fixing parts periodically to make sure they are always well fixed.
• To use it only if the structure is stable.
• To use it with bare feet to avoid slip.
• Don’t jump over gym, or from a high position of gym to floor.
• Don’t play it rudely.
• Don’t have two or more kids stand or sit on the same single tube at the same time.
• These gyms are specially designed for young kids aged one year up to 5 years.
• Don’t have them used by the ones beyond this age range.
ASSEMBLY ILLUSTRATION
ASSEMBLY ILLUSTRATION
ASSEMBLY ILLUSTRATION
GENIUS TOY TAIWAN CO., LTD.
http://www.gigo.com.tw
e-mail: gigotoys@ms8.hinet.net
• U.S.A PAT. NO. 6413004 • JAPAN PAT. NO. 3078464 • TAIWAN PAT. NO.167633
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>