bHaptics DK1 TactGlove VR Device Developer Haptic Gloves User Manual
- October 31, 2023
- bHaptics
Table of Contents
bHaptics DK1 TactGlove VR Device Developer Haptic Gloves
Product Information
The TactGlove DK1 is a wearable device that provides haptic feedback through built-in vibration motors. It features a main control case and a built-in battery in the wrist area. Each fingertip also has its own vibration motor, and there is an additional vibration motor embedded in the main control case. The TactGlove DK1 supports Bluetooth connectivity and has different indicator lights to show its status.
Product Specification
Product Name| Model Name| Size (M Size)| Weight (M Size)| Operation Time|
Wireless Frequency| Connection Type| Battery Charging Time
---|---|---|---|---|---|---|---
TactGlove DK1| N/A| M Size| N/A| N/A| N/A| N/A| N/A
Product Usage Instructions
- Turn on the Bluetooth function of your smartphone.
- Download and install the bHaptics player application from the Android/iOS store.
- Press the power button of the TactGlove DK1 and check for the blue blinking light to indicate Bluetooth pairing mode.
- Launch the bHaptics Player application on your smartphone.
- Tap the menu button at the top left corner to access the connection settings.
- Select “TactGlove DK1” from the available devices to establish the Bluetooth connection.
- In the bHaptics Player application, tap the “Test” menu located at the center of the bottom of the screen.
- Use the circular icons to turn on/off each vibration motor of the TactGlove DK1.
- Adjust the vibration strength by controlling the slider at the bottom of the screen.
- To power off the TactGlove DK1 and disconnect the connection, long press the power button.
Caution: Any modifications not approved by the responsible party for compliance may void the user’s authority to operate the equipment. The TactGlove DK1 complies with Part 15 of the FCC Rules and should not cause harmful interference. It must also accept any interference received, including interference that may cause undesired operation.
INSTRUCTIONS
Product Overview
- Main Control Case: You can turn on/off the TactGlove DK1 with the power button.
- Blue Blinking: Bluetooth Pairing / Yellow Solid: Bluetooth Paired
- Built-in Battery: The battery is embedded in the wrist area.
- Embedded Vibration Motor: Each fingertip has a built-in vibration motor. Also, one vibration motor is embedded into the Main Control Case
Product Specification
| Product Name | TactGlove DK1 |
|---|---|
| Model Name | BHTG06D100 |
| Size (M Size) | Length: 23.1cm, Width: 9.5cm, Height: 4.5cm |
| Weight (M Size) | 110g |
| Operation Time | 3.5 hours |
| Wireless Frequency | 2.402 – 2.480 GHz (Bluetooth LE) |
| Connection Type | Bluetooth Low Energy (BLE) |
| Battery | Li-ion rechargeable battery (3.8V, 680mAh, 2.584Wh) |
| Charging Time | 2 hours with 5V, 0.5A, 2.5W max |
How to Play
You can control each vibration motor of TactGlove DK1 using a smartphone.
- Turn on the Bluetooth function of a smartphone.
- Download and install the bHaptics player application from the Android/iOS store.
- Press the power button of TactGlove DK1 and check the blue blinking
- Run the bHaptics Player application, touch the menu button at the top left to connectTactGlove DK1
- Touch the Test menu in the center of the bottom of the application
- Turn on and off each motor of TactGlove DK1 by pressing the circular icon and adjusting the vibration strength by controlling the slider at the bottom.
- Long press the power button of TactGlove DK1 to turn off the power and disconnect the connection.
FCC Information to User
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Compliance Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation