LIEBHERR TP1764 Under Counter Fridge with Ice Box White User Guide

LIEBHERR TP1764 Under Counter Fridge with Ice Box White User Guide

The manufacturer works constantly on the further develop‐ mint of all the types and models. Therefore please under‐ stand that we have to reserve the right to make design, equipment and technical modifications.
To get to know all the benefits of your new appliance, please read the information contained in these instructions carefully.
The instructions apply to several models. Differences may occur. Text relating only to specific appliances is marked with an asterisk (*).
Instructions are marked with a , and results are marked with a

Appliance at a glance

Overview of the appliance and equipment

Note

• Place food inside the appliance as shown in the diagram.
  This allows the appliance to save energy during opera‐ tion.

• Shelves, drawers and baskets are arranged for optimum energy efficiency on delivery.

Fig. 1

1. Operating devices and controls
2. Freezer compartment
3. Butter and cheese compartment
4.  Bottle shelf
5. Bottle retainer
6. Shelf, , divisible
7. Shelf, adjustable
8. Coldest zone
9. Vegetable crisper
10. Adjustable feet at the front and castors* at the rear
11. Condensate drain
12. Type plate

Appliance range of use Intended use

The appliance is only suitable for cooling food products in a domestic or household-like environment. This includes, for example, use:

• in staff kitchens, bed and breakfast seta‐ lishenets,
• by guests in country houses, hotels, motels and other accommodation,
• for catering and similar services in the wholesale trade.

The appliance is not suitable for freezing food;*

All other types of use are not permitted.
Foreseeable misuse
The following applications are expressly forbidden:

• Storing and refrigerating medicines, blood plasma, laboratory preparations or similar
• substances and products based on the Medical Device Directive 2007/47/EC
• Use in areas at risk of explosions
  Misusing the appliance may lead to damage to the goods stored or they may spoil.
  Climate classifications
  Depending on the climate classification the appliance is designed to operate in restricted ambient temperatures. The climate classifica‐ tion applying to your appliance is printed on the rating plate.

Note

• Keep to the specified ambient tempera‐ trues in order to guarantee that the appliance works properly.

Conformity

The refrigerant circuit has been tested for leaks. The appliance complies with the applicable safety regulations and with the corresponding directives.
For the EU market:
The appliance complies with directive 2014/53/EU.
For the GB market:
The appliance complies with Radio Equipment Regulations 2017 SI 2017 No. 1206
The full text of the EU Declaration of Conformity is available on the following website: www.Liebherr.com
SVHC substances according to REACH regulation

You can check whether your appliance contains SVHC
substances according to REACH regulation at the following
link: home.liebherr.com/de/deu/de/liebherr-erleben/nach‐ haltigkeit/umwelt/scip/scip.html
EPREL database
Details about energy labelling and ecodesign requirements will be available on the European product database (EPREL) from 1st March 2021. You can access the product database at the following link: https://eprel.ec.europa.eu/ You will be asked to enter the model ID. You can find the model ID on the nameplate.
**Installation dimensions

Fig. 2**

| a| b| c| c’| d| e| e’| g| h
---|---|---|---|---|---|---|---|---|---
TP1760| 601| 597| 612| 640| 1175x| 628x| 654x| 610x| 850
TP1764| 601| 597| 612| 640| 1175x| 628x| 654x| 610x| 850

For appliances supplied with wall spacers, the measure‐ ment increases by 35 mm (see 4.2 Installing the appliance) .

Saving energy

• Pay attention to good ventilation. Do not cover ventilation holes or grids.

• Do not install the appliance in direct sunlight, next to an oven, radiator or similar.

• Energy consumption depends on the installation condi‐ tions, e.g. the ambient temperature (see 1.2 Appliance range of use) . A warmer ambient temperature can increase the energy consumption.

• Open the appliance for as short a time as possible.

• The lower the temperature is set the higher the energy consumption.

• Sort your food: home.liebherr.com/food.

• Keep all food properly packed and covered. This prevents frost from forming.

• Only take food out for as long as necessary so that it doesn’t warm up too much.

• Inserting warm food: allow to cool down to room temper‐ature first.

• Thaw frozen food in the refrigerator.*

• If there is a thick layer of frost in the appliance: defrost the appliance.*
  Dust deposits increase energy consump‐ tion:

• For refrigerators with heat exchangers dust the metal grid on the back of the appliance once a year.

General safety instructions

Please keep these operating instructions in a safe place so you can refer back to them at any time.
If you pass the appliance on, please hand these operating instructions to the next user.

Read these operating instructions carefully before use to ensure safe and correct use of the appliance. Follow the instructions, safety instructions and warning messages included at all times. They are important for ensuring you can operate and install the appliance safely and without any problems.

Danger for the user:
This device can be used by children and people with impaired physical, sensory or mental abilities or with a lack of experi‐ ence and knowledge provided that they are supervised or have received instruction in the safe use of this device, and about the resulting hazards. Children must not play with this appliance. Cleaning and user maintenance work must not be carried out by children without adult supervision. Chil‐ dren aged between 3 and 8 are allowed to load and unload the appliance. Children below the age of 3 must be kept away from the appliance unless they are under contin‐ uous adult supervision.

• The socket must be easily accessible so that the appliance can be disconnected quickly from the electricity in an emer‐ gency. It must not be located in the area behind the appliance.
• When disconnecting the appliance from the supply, always take hold of the plug. Do not pull the cable.
• In the event of a fault pull out the mains plug or deactivate the fuse.
• Do not damage the mains power cable. Do not operate the appliance with a defective mains power cable.
• Repairs, interventions on the appliance and the replacement of mains connection line may only be carried out by AfterSales Service or other suitably trained specialist personnel.
• Only assemble, connect and dispose of the appliance according to the instructions.

Fire hazard:

• The coolant used (information on the model plate) is ecofriendly but also flammable. Any leaking coolant may ignite.
• Do not damage the refrigerant circuit pipes.
• Do not handle ignition sources inside the appliance.
• Do not use electrical appliances inside the appliance (e.g. steam cleaners, heaters, ice cream makers, etc.).
• If the refrigerant leaks: remove any naked flames or ignition sources from the vicinity of the leakage point. Properly air the room. Inform customer services.
• Do not store explosives or sprays using combustible propellants such as butane, propane, pentane, etc. in the appliance. To identify these spray cans, look for the list of contents printed on the can, or a flame symbol. Gases possibly escaping may ignite due to electrical components.
• Keep burning candles, lamps and other items with naked flames away from the appliance so that they do not set the appli‐ ance on fire.
• Please be sure to store alcoholic drinks or other packaging containing alcohol in tightly closed containers. Any alcohol that leaks out may be ignited by electrical components.

Danger of tipping and falling:

• Do not misuse the plinth, drawers, doors etc. as a step or for support. This applies particularly to children.

Danger of food poisoning:

• Do not consume food which has been stored too long.

Danger of frostbite, numbness and pain:

• Avoid prolonged skin contact with cold surfaces or refrigerated/frozen goods or take protective measures, e.g wear gloves.

Danger of injury and damage:

• Hot steam can lead to injury. Do not use electrical heating or steam cleaning equip‐ ment, open flames or defrosting sprays to defrost.
• Do not use sharp implements to remove the ice.

Risk of crushing:

• Do not hold the hinge when opening and closing the door. Fingers may get caught.

Symbols on the appliance:

This symbol may be located on the compressor. It relates to the oil in the compressor and makes reference to the risk that: Swallowing or inhaling can be fatal. This advice is only relevant to recy‐ cling. There is no danger in normal opera‐ tion.

**** This symbol is located on the compressor and indicates the danger of flammable materials. Do not remove the sticker.

This or a similar sticker may be located on the rear of the appliance. This sticker indicates that there are vacuum insulation panels (VIP) or perlite panels in the door and/or housing. This advice is only relevant to recycling. Do not remove the sticker.
Please note the warning messages and other specific advice in the other chapters:

| DANGER| indicates an immediately hazardous situation which will lead to death or serious injuries if it is not avoided.
---|---|---
| WARNING| indicates a hazardous situation which may lead to death or serious injuries if it is not avoided.
****| CAUTION| indicates a hazardous situation which may lead to minor or moderate injuries if it is not avoided.
| NOTICE| indicates a hazardous situation which may lead to damage to property if it is not avoided.
| Note| indicates useful instructions and tips.

Controls and displays

Operating and control elements

The temperature display flashes if/when:

• You change the temperature setting

The following displays indicate a fault. Possible causes and solutions: (see 7 Malfunctions) .

Putting into operation

Transporting the appliance

• Transport the appliance only in suitable packaging.
• Transport the appliance upright.
• Do not transport the appliance on your own.

Installing the appliance
WARNING
Fire hazard due to dampness!
If live parts or the mains lead become damp this may cause short circuits.
Fire hazard due to dampness!

• The appliance is designed for use in enclosed areas. Do not operate the appliance outdoors or in areas where it is exposed to splash water or damp conditions.

WARNING
Danger of fire due to incorrect positioning!
If the mains cable or plug touches the back of the applcance, the vibration can damage the mains cable or the plug resulting in a short circuit.

• Make sure the mains cable is not trapped under the appliance when you position the appliance.
• Stand the appliance so that it is not touched by connectors or main cables.
• Do not connect any appliances to sockets in the area of the back of the appliance.
• Do not place and operate multi-sockets/power distribu‐ tors and other electronic devices (such as halogen trans‐ formers) at the back of the appliances.

WARNING
Leaking coolant and oil
Fire. The coolant contained in the appliance is eco-friendly, but also flammable. The oil contained in the appliance is flammable. Escaping coolant and oil can ignite if the concentration is high enough and in contact with an external heat source.

• Do not damage the pipelines of the coolant circuit and the compressor.
• Do not place appliances emitting heat e.g. microwaves, toasters etc. on the appliance!

WARNING
Risk of damage due to condensation!
Mould and corrosion. Due to heat not being able to escape, condensation can form between two appliances and this can cause the appliances to be affected by mould or corrode.

• Do not place the appliance directly on top of another fridge/freeze

NOTICE
Risk of damage due to condensation!
Mould and corrosion. Due to heat not being able to escape, condensation can form between two appliances and this can cause the appliances to be affected by mould or corrode.

• Do not place the appliance directly on top of another fridge/freezer

Putting into operation

NOTICE
Covered vents!
Damage. Appliance can overheat, which can reduce the service life of various parts of the appliance and lead to operational impairments.

• Always make sure there is good ventilation.
• Always keep vents or ventilation grids in the appliance housing and in the kitchen furniture (fully integrated appliance) unobstructed.

Note
The bags at the rear of the appliance are important for
proper operation. Their contents are nontoxic and nonhazar‐ dous.

• Do not remove the bags!

NOTICE
Risk of damage due to condensate!

• Do not install the appliance directly alongside a further
  refrigerator/freezer.

  • Before you connect the appliance, report any damage immediately to the delivery company.
  • The floor of the installation site must be horizontal and even.
  • Do not install the appliance in direct sunlight, next to an oven, radiator or similar.
  • Install the appliance with the rear panel up against the wall and always use the supplied wall spacers (see below).
  • Only ever move the appliance when it is empty.
  • The surface supporting the appliance must be at the same level as the surrounding floor.
  • Do not install the appliance on your own.
  • The more coolant there is in the appliance, the larger the room in which the appliance is installed must be. If the room is too small, any leak may create a flammable mixture of gas and air. For each 8
  • of coolant the instal‐ lation space must be at least 1 m3

• Information on the coolant is on the model plate inside the appliance.

• Detach the connecting cable from the rear of the appli‐ ance, removing the cable holder at the same time because otherwise there will be vibratory noise!

• Remove the protective film from the decorative trims.

• Remove all transit supports.
  The spacers supplied with some appliances must be used to achieve the stated energy consumption. These will extend the depth of the appliance by approx. 35 mm. The appliance is fully functional if the spacers are not used, but does have a slightly higher energy consumption.

• In the case of an appliance with enclosed wall spacers, mount the wall spacers on the back of the appliance at the top left and right.

• Align the appliance so that it stands firmly and on a level by applying the accompanying spanner to the adjust‐ able-height feet (A) and using a spirit level.

Note

• Clean the appliance (see 6.2 Cleaning the appliance) .
  If the appliance is installed in a very damp environment, condensate may form on the outside of the appliance.

• Always see to good ventilation at the installation site.

Changing over the door hinges
You can change over the door hinges if necessary.
Make sure that the following tools are at hand:

• * Torx® 25

  • Torx® 15
  • Supplied open-ended wrench
  • If necessary, a second person to assist with installation

CAUTION
Risk of injury if the door tips!

• * Take good hold of the door.

  • Set down the door carefully.

  • Remove the spacer Fig. 4 (13 ) from under the left-hand
    side of the door.

Fig. 5 On appliances with a door handle

Fig. 6 On appliances with a freezer compartment*

• Follow the sequence of the item numbers in the diagram.

  ---

• Insert the spacer Fig. 7 (13) back under the right-hand
  side of the door, as it is important for the stability of the
  appliance.

WARNING
Risk of injury due to the door dropping out!
If the bearing parts are not screwed into place firmly enough, the door may drop out. This may lead to severe injuries. What is more, the door may not close and therefore the appliance may fail to cool properly.

• Screw on the bearing brackets/bearing pins tightly (4 Nm).
• Check all of the screws and retighten if necessary.

Sliding into the row of units

Fig. 8

1. Top cupboard
2. Appliance (
3. Kitchen cabinet
4. Wall x

For appliances with supplied wall spacers, add 35 mm (see 4.2 Installing the appliance) to the dimensions. The appliance can be built into kitchen units. A top cupboard Fig. 8 (2) can be added above the appliance in order to bring the appliance Fig. 8 (1) up to the height of the fitted kitchen units.
If you are integrating the appliance into a kitchen unit (max. depth 580 mm) you can install it right next to the kitchen cabinet Fig. 8 (3). The appliance measures 34 mm x at the side and 50 mm x at the centre in relation to the front of the kitchen cabinet.
NOTICE
Danger of overheating due to insufficient air ventilation!
The compressor may be damaged if there is insufficient air ventilation.

• Take care to ensure adequate air ventilation.
• Observe the ventilation requirements.
  • Ventilation requirements:
  • At the back of the top cabinet, there must be an air outlet shaft at least 50 mm deep spanning the entire width.
  • The ventilation above must be at least 300 cm2
  • The wider the ventilation clearance, the more efficiently the appliance will run.

If you are installing the appliance with the hinges next to a wall Fig. 8 (4), the distance between the appliance and the wall must be at least 40 mm. This is how far the handle protrudes when the door is open.

Disposing of packaging

WARNING
Danger of suffocation due to packing material and plastic
film!

Do not allow children to play with packing material.

• The packaging is made of recyclable materials:
• corrugated board/cardboard
• expanded polystyrene parts
• polythene bags and sheets
• polypropylene straps
• nailed wooden frame with polyethylene panel*

Control

• Take the packaging material to an official collecting point.

Connecting the appliance

NOTICE
Failure to connect properly Damage to the electronics.

• Do not connect the appliance to a stand-alone inverter, e.g. solar power systems and petrol generators.
• Do not use an energy saving plug.

WARNING
Failure to connect properly Fire hazard.

• Do not use an extension cable.
• Do not use distributor blocks.

The type of current (alternating current) and voltage at the installation site have to conform with the data on the type plate (see 1 Appliance at a glance) .
The socket must be properly earthed and fused. The tripping current for the fuse must be between 10 A and 16 A.
The socket must be easily accessible so that the appliance can be quickly disconnected from the supply in an emer‐ gency. It must be outside the area of the rear of the appli‐ ance.

• Check the electrical connection.
• Plug in the power plug.

Switching on the appliance

• Press On/Off button Fig. 3 (1).

  • The appliance is switched on. The temperature display
    indicates the set temperature.

  • If “DEMO” is displayed, demo mode is activated. Please contact the after sales service.

Control

Brightness of the temperature display
You can adjust the brightness of the temperature display to the light conditions of the room in which the appliance is installed.

Setting the brightness
The brightness is adjustable between h 0 (minimum bright‐ ness) and h 5 (maximum brightness).

• Activate setting mode by pressing the SuperFrost button Fig. 3 (3)/SuperCool button Fig. 3 (4) for approx. 5 sec.

  • The Menu symbol is shown on the display, Fig. 3 (5).
  • flashes on the display.

• Use the adjustment button, Fig. 3 (2), to select h.

• Briefly confirm with the SuperFrost button Fig. 3 (3)/ SuperCool button Fig. 3 (4).

  • The display shows the last set brightness value.

• Use the adjustment button, Fig. 3 (2), to set the desired value from h 0 to h 5.

• Briefly confirm the newly set brightness value with the SuperFrost button Fig. 3 (3)/ SuperCool button Fig. 3 (4).

• h flashes on the display.

• The brightness is set.

  • After making the change, deactivate setting mode: Press the On/Off button Fig. 3 (1) once.

• The temperature display shows the temperature again.
  If setting mode is already activated but you would like to keep the old brightness value setting:

• Press the On/Off button Fig. 3 (1)twice to deactivate setting mode.

  • The temperature display shows the temperature again.

Child proofing
The child-proofing function enables you to make sure that the appliance is not inadvertently switched off by playing children.

• Briefly confirm the newly set brightness value with the Super Frost button Fig. 3 (3)/ Super Cool button Fig. 3 (4).

• h flashes on the display.

• The brightness is set.

  • After making the change, deactivate setting mode: Press the On/Off button Fig. 3 (1) once.

• The temperature display shows the temperature again.
  If setting mode is already activated but you would like to keep the old brightness value setting:

  • Press the On/Off button Fig. 3 (1)twice to deactivate setting mode.

• The temperature display shows the temperature again.

Child proofing
The child-proofing function enables you to make sure that the appliance is not inadvertently switched off by playing children.

Setting the child lock
To switch on the function:

• * Activate setting mode: press SuperFrost* button Fig. 3 (3)/SuperCool* button Fig. 3 (4) for approx. 5 seconds.*

• The Menu symbol Fig. 3 (5) is shown on the display.

• c flashes on the display.

  • Briefly confirm with the SuperFrost button Fig. 3 (3)/ SuperCool button Fig. 3 (4).* w c1 appears in the display.
  • Briefly confirm with the SuperFrost button Fig. 3 (3)/ SuperCool button Fig. 3 (4).*

• The child lock symbol Fig. 3 (7), lights up on the display.

•  flashes on the display.

• The child lock function is switched on.
  If setting mode is to be terminated:

  • Briefly press the On/Off button Fig. 3 (1). -oru Wait for 5 minutes.

• The temperature display shows the temperature again.

To switch off the function:

• * Activate setting mode: press the SuperFrost* button Fig. 3 (3)/SuperCool* button Fig. 3 (4) for approx. 5 seconds.*

• The Menu symbol Fig. 3 (5) is shown on the display.

• flashes on the display.

  • Briefly confirm with the SuperFrost button Fig. 3 (3)/ SuperCool button Fig. 3 (4).*

• c0 appears in the display.

  • Briefly confirm with the SuperFrost button Fig. 3 (3)/ SuperCool button Fig. 3 (4).*

• The child lock symbol Fig. 3 (7) goes out.

• flashes on the display.

• The child lock function is switched off.
  If setting mode is to be terminated:

  • Briefly press the On/Off button Fig. 3 (1). -oru Wait for 5 minutes.

• The temperature display shows the temperature again.

Refrigerator compartment
The natural circulation of air in the refrigerator compart‐ ment results in zones differing in temperature. It is coldest directly above the vegetable drawers and at the rear wall. It is warmest at the top front of the compartment and in the door.

Refrigerating food
The coldest areas are directly above the vegetable compart‐
ments and along the back wall. The warmest area is at the top front and in the door.*

• Store perishable foods such as ready-to-eat meals, meat and sausages in the coldest area. Place butter and preserves in the top area and in the door. (see 1 Appliance at a glance)
• Use reuseable plastic, metal, aluminium, glass containers and foil wrap to store food.
• Always store raw meat and fish in clean, sealed containers on the bottom shelf of the refrigerator, to prevent them coming into contact with or dripping onto other foods.
• Foods that easily absorb or give off smell or taste, as well as liquids, should be stored in sealed containers or covered.
• Do not pack foods too closely together, as the air needs to circulate

Setting the temperature
The temperature depends on the following factors:

• * the frequency of opening the door

  • how long the door is open for
  • the room temperature of the installation location
  • the type, temperature and quantity of the food

Recommended temperature setting: 5 °C An average temperature of approx. -18 °C is then estab‐ lished in the freezer compartment

The temperature is changed sequentially. Once the 2 °C setting is reached, the sequence starts again at 9 °C.

• Call up temperature function: press the setting button Fig. 3 (2).

  • The previously-set value will flash in the temperature display.

• Change the temperature in 1 °C steps: Press the setting button Fig. 3 (2) until the required temperature is indicated in the temperature display.

• Change temperature continually: hold down setting button.

  • During adjustment the value flashes on the display.
  • The new setting is adopted approx. 5 seconds after the last time the button was pressed and the set tempera‐ ture is again displayed. The temperature in the interior gradually adjusts to the new value.

Super Cool
With Super Cool you switch to the highest cooling performance to reach lower cooling temperatures.
Use Super Cool, to rapidly cool large amounts of food.

When Super Cool is activated, the appliance operates with maximum cooling performance. The noise of the refrigera‐ tion unit may be temporarily louder as a result. The Super Cool function uses slightly more energy.

**Switching onSuperCool***

• Briefly press SuperCool button Fig. 3 (4).
• The SuperCool Fig. 3 (9) symbol lights up in the display.
• The cooling temperature drops to the lowest setting.
• SuperCool is on.
• SuperCool turns off automatically. The appliance continues in energy-saving Normal mode.

**To prematurely deactivate SuperCool***

• Briefly press SuperCool button Fig. 3 (4).
  • The SuperCool symbol Fig. 3 (9) goes out in the display.
  • SuperCool is deactivated.

Shelves
Moving or removing shelves
The shelves are prevented from being pulled out acciden‐ tally by pull out stops.

Fig. 9

• Lift the shelf and pull forward a little.
• Adjust the height of the shelf. To do this move the slots along the supports.
• In order to remove the shelf fully, place it at a slant and pull out towards the front.
• Insert shelf with the raised edge pointing upwards at the back.
  • The food does not freeze onto the rear wall.

Dismantling shelves

• The shelves can be dismantled for cleaning.

Using the sectioned shelf
Fig. 10
Adjusting the height:

• Pull the glass plates out forwards one by one.
• Remove the support from the catch mechanism and click into place at the required height. Using both shelves:
• Lift the top glass plate and pull the bottom glass plate forwards.
  • The glass plate (1) with the pull out stops must be at the front so that the stops (3) point downward.

Door racks
**Moving the storage rack

Fig. 11**

Dismantling door racks

Fig. 12

• The door racks can be dismantled for cleaning.

Freezer compartment
You can store frozen food for several months, make ice cubes and freeze fresh food in the freezer compartment at a temperature of -18 °C and lower.
The air temperature in the compartment, measured by ther‐ mometer or other instruments, may fluctuate. Temperature fluctuations are greater in a half full or empty freezer compartment and it is possible to reach tempera‐ tures higher than -18 °C.*
Freezing food
The rating plate indicates the maximum quantity of fresh food you can freeze within 24 hours (see 1 Appliance at a glance) under “Freezing capacity … kg/24h

CAUTION
Risk of injury due to broken glass!
Bottles and cans containing drinks may burst when being frozen. This applies particularly to sparkling drinks.

• Do not freeze bottles and cans containing drinks!

So that the food is rapidly frozen through to the core, do not exceed the following quantities per pack

• Fruit, vegetables up to 1 kg
  • Meat up to 2.5 kg
• Pack the food in portions in freezer bags, reusable plastic, metal or aluminium containers
• Distribute the food over the shelf and do not let it touch goods that are already frozen, in case this causes them to defrost.*

Storage time

Guide times for storing various types of food in the freezer compartment:

Ice cream| 2 to 6 months
Sausage, ham| 2 to 6 months
Bread, bakery products| 2 to 6 months
Game, pork| 6 to 10 months
Fish, fatty| 2 to 6 months
Fish, lean| 6 to 12 months
Cheese| 2 to 6 months|
Poultry, beef| 6 to 12 months|
Vegetables, fruit| 6 to 12 months|

Storage times given are guide times.

Thawing food

• * in the refrigerator compartment

  • in a microwave oven
  • in a conventional or fan oven
  • at room temperature
• Remove only as much food as is required. Use thawed food as quickly as possible.
• Food once thawed should be re-frozen only in exceptional cases.

Super Frost *

With this function you can freeze fresh food quickly through to the core. The appliance oper‐ ates with maximum refrigeration. The noise of the refrigeration unit may be temporarily louder as a result.

In addition, frozen food already in storage is given a “cold reserve”. The food stays frozen longer as a result when you defrost the appliance.

You can freeze as many kilograms of fresh food within 24 hrs as is indicated on the type plate under “Freezing capacity … kg/24hrs”. This maximum freezing quantity can vary depending on model and climate class.

You have to activate SuperFrost in good time, depending on how much fresh food is to be frozen: about 6 hours before placing the food inside in case of small amounts and about 24 hours in advance in case of the maximum amount of food to be frozen.

Wrap produce and spread it out as far as possible. Do not allow produce to be frozen to touch produce that is already frozen to prevent the latter thawing. You do not have to activate SuperFrost in the following cases:

• * when placing frozen food in the freezer

  • when freezing up to approx. 1 kg fresh food daily

• Freezing with SuperFrost

• Briefly press the SuperFrost button Fig. 3 (3) once.

• The SuperFrost symbol Fig. 3 (6) shines.

• The freezing temperature drops, the appliance operates with the maximum cooling capacity.
  For a smaller quantity of produce to be frozen:

• wait approx. 6 h.
  For the maximum quantity of produce to be frozen:

• wait approx. 24 h.

• Place produce in the freezer compartment so that it touches the base or sides.*

  • SuperFrost is automatically deactivated. Depending on the quantity placed inside, after 30 h at the earliest, 65 h at the latest.
  • The SuperFrost symbol Fig. 3 (6) extinguishes once freezing is completed.

• The appliance continues to operate in the energy-saving, normal mode

Maintenance

Defrosting
Defrosting refrigerator compartment
The fridge compartment defrosts automatically. The defrosted water will evaporate. Water drops or a thin layer of frost or ice can form on the back wall; this is a completely normal part of the machine’s function.

• Clean the drain hole at regular intervals to allow the defrost water to drain (see 6.2 Cleaning the appliance) .

**Defrosting freezer compartment*
A layer of frost and ice forms in the freezer compartment after the appliance has been in use for a lengthy period of time. This is quite normal. The layer of frost and ice forms more quickly if the door is opened frequently or if the food is warm when placed inside. However, a thick layer of ice will increase the appliance‘s energy consumption. You should therefore defrost the appliance regularly.
WARNING**

• Improper defrosting of the appliance!
  Injuries and damage.

• Do not use mechanical equipment or other methods to speed up the defrosting process other than those recom‐ mended by the manufacturer.

• Do not use electrical heating or steam-cleaning appli‐ ances, naked flames or defroster sprays to defrost.

• Do not use sharp objects to remove ice.

• Switch on SuperFrost one day before defrosting.*

• Switch off the appliance.

  • The temperature display goes out.
  • If the temperature display does not go out, the childproofing function (see 5.2 Child proofing) is active.

• Pull out the plug.

• Wrap the frozen food in newspaper or blankets and store in a cool place.

• Leave the compartment and appliance door open during defrosting.

• Remove detached pieces of ice.

• If necessary, pick up defrost water several times, using a sponge or cloth.

• Clean the compartment (see 6.2 Cleaning the appliance) .

Cleaning the appliance
Clean the appliance regularly
WARNING
Risk of injury and damage as a result of hot steam!
Hot steam can lead to burns and can damage the surfaces.

• Do not use any steam cleaners

NOTICE
Incorrect cleaning damages the appliance!

• Do not use cleaning agents in concentrated form.

• Do not use any scouring or abrasive sponges or steel wool.
  Do not use any sharp or abrasive cleaning agents, nor any that contain sand, chloride or acid.

• Do not use chemical solvents.
  Do not damage or remove the type plate on the inside of the appliance. It is important for the customer service.

• Do not pull off, bend or damage cables or other compo‐ nents.

• Do not allow any cleaning water to enter the drain channel, ventilation grille or electrical parts.

• Please use soft cleaning cloths and a universal pHneutral cleaning agent.

• Please use cleaning and care products suitable for contact with foodstuffs in the appliance interior.

• Empty appliance.

• Pull out the power plug.
  

• Clean the vent grille regularly.

  • Dust deposits increase energy consumption.

• Clean plastic outer and inner surfaces with lukewarm water and a little washing-up liquid.

• Only use a soft clean cloth to wipe side walls with a paint finish. In the case of heavy soiling, use lukewarm water with neutral cleaning agent.

• Use only a soft clean cloth to wipe door surfaces with a paint finish. In the case of heavy soiling, use a little water or neutral cleaning agent. A micro-fibre cloth can be used optionally.

• Clean drain hole: Remove deposits with a narrow instrument, e.g. a cotton bud.

• Most of the parts can be dismantled for cleaning: see the relevant chapter.

• Clean drawers by hand with lukewarm water and a little washing up liquid.

• Clean other items of equipment by hand with lukewarm water and a little washing-up liquid.

After cleaning:

• Wipe dry the appliance and items of equipment.
• Connect the appliance and switch it on again.
• Switch on SuperFrost (see 5.4.4 SuperFrost) . When the temperature is sufficiently cold:
• Put the food back inside.

Replacing the interior illumination
with LED lamp In the device, an LED lamp is used as standard illumination for the interior space.

When an incandescent bulb is used:

• Use an incandescent lamp with max. 15 W and E14 socket.
• Power supply (AC) and voltage at the operating point must comply with the details on the rating plate (see 1 Appliance at a glance) .

When a LED is used:

• Use only the original LED lamp from the manufacturer. The lamp can be obtained through customer service or a specialist dealer (see 6.4 Customer service) .

Malfunctions

WARNING
Risk of injury from LED light!
The light intensity of the LED lighting corresponds to risk group RG 2. If the cover is removed:

• Do not look directly into the light at close quarters through optical lenses. Doing so may damage your eyes

WARNING
Fire hazard from the LED light!
If different LED lights are used, there is a danger of over‐ heating or fire.

• Use the manufacturer’s original LED light.
• Switch off the appliance.
• Pull out the mains plug or switch off/unscrew the fuse.
• Take hold of the lamp cover at the top and bottom Fig. 13 (1).
• Disengage the lamp cover at the back and detach it Fig. 13 (2).
• Replace the lamp Fig. 13 (3).
• Clip the back end of the cover in and clip the sides into place.

Fig. 13

Customer service
First check whether you can rectify the fault yourself (see 7 Malfunctions) . If you cannot rectify the problem, contact Customer Services. You can find the address in the enclosed Customer Service Directory.

WARNING
Unprofessional repair!
Injuries.

• Have any repairs and action – not expressly specified – on the appliance and mains cable carried out by service personnel only. (see 6 Maintenance)

• A damaged mains cable may only be replaced by the manufacturer, the manufacturer’s Customer Service or a similarly qualified person.

• In the case of appliances with an IEC connector, the change may be made by the customer.

• Read the appli‐ ance designation Fig. 14 (1), service No. Fig. 14 (2) and serial No. Fig. 14 (3) off the model plate located inside the appliance on the left-hand side.

• Notify the customer service, specifying the fault, appliance designation Fig. 14 (1), service No. Fig. 14 (2) and serial No. Fig. 14 (3).

  • This will help us to provide you with a faster and more accurate service.

• Keep the appliance closed until the customer service arrives.

  • The food will stay cool longer.

• Pull out the mains plug (not by pulling the connecting cable) or switch off the fuse.

Energy efficiency class lighting

Lighting

Energy efficiency class1| Light source
This product contains an energy efficiency class G light source| LED

1. The appliance may contain light sources with different energy efficiency classes. The lowest energy efficiency class is indicated

Malfunctions

Your appliance is designed and manufactured for a long life span and reliable operation. If a malfunction none the‐ less occurs during operation, check whether it is due to a handling error. In this case you will have to be charged for the costs incurred, even during the warranty period. You may be able to rectify the following faults yourself:

Defect Causa LED on the bottom rear of the appliance (at the compressor) flashes regularly every 15 seconds.→ The inverter is equipped with a diagnostic LED. Excessive noise.→ Due to the various speed steps, speed- regulated compressors can generate different running noises. A bubbling and gurgling noise.→ This noise comes from the refrigerant flowing in the refrigeration circuit. A quiet clicking noise.→ The noise is produced whenever the refrigeration unit (motor) auto‐ magically switches on or Offa hum. It is briefly a little louder when the refrigeration unit (the motor) switches on.→ The refrigeration increases auto‐ magically when the Super Frost, function is activated, fresh  food has just been placed in the appliance or the door has been left open for a while.Vibration noises→ The appliance is not standing firmly on the floor. As a result objects and adjacent units  start to vibrate when the refrigerator is running. The temperature display indicates: F to F→ There is a fault. DEMO shines in the temperature display.→ The demo mode is activated. The outer surfaces of the appliance are warm.→ The heat of the refrigeration circuit is used to prevent condensate from forming. The temperature is not cold enough.→ The door of the appliance is not properly closed.

the appliance.
→ The power plug is not properly inserted in the wall socket.| ▶ Check power plug.
→ The fuse of the wall socket is not in order.| ▶ Check fuse.
The compressor runs for a long time.| → The  compressor  switches  to  a low speed when little cold is needed. Although the running time is increased as a result, energy is saved.| ▶ This is normal in energy-saving models.
→ SuperFrost is activated.| ▶ The compressor runs for longer in order to rapidly cool the food. This is normal.
Remedy
→ **SuperCool is activated.*| ▶ The compressor runs for longer in order to rapidly cool the food. This is normal.
▶ The flashing is normal.
▶ The sound is normal.
▶ The sound is normal.
▶ The sound is normal.
▶ The sound is normal.
→ The refrigeration increases auto‐ matically when the SuperCool function is activated, fresh  food has just been placed in the appli‐ ance or the door has been left open for a while.| ▶ The sound is normal.
→ The refrigeration increases auto‐ matically when fresh food has just been placed in the  appliance  or the door has been left open for a while.| ▶ The sound is normal.
→ The ambient temperature is too high .| ▶ Solution: (see 1.2 Appliance range of use)
▶ Align the appliance using the adjustable feet.▶ Keep bottles and jars apart.
▶ Please contact the after-sales service (see 6 Mainte‐ nance) .
▶ Please contact the after-sales service (see 6 Mainte‐ nance) .
▶ This is normal.
▶ Close the door of the appliance.
→ Insufficient ventilation.| ▶ Keep ventilation grille clear, and clean it.
→ The ambient temperature is too high.**| ▶ Solution: (see 1.2 Appliance range of use) .

Decommissioning

whether the appliance reaches the required temperature by itself. If not, please contact the after sales service (see 6 Maintenance) .
→ Too much fresh food was placed inside without SuperFrost.| ▶ Solution: (see 5.4.4 SuperFrost) *
→ The temperature is incorrectly set.| ▶ Set the temperature to a colder setting and check after 24 hours.
→ The appliance is too close to a source of heat (stove, heater etc).| ▶ Change the position of the appliance or the source of heat.
T he internal light does not come on .| → The appliance is not switched on.| ▶ Switch the appliance on.
→ The door was open for longer than 15 minutes.| ▶ The internal light switches itself off automatically after about 15 minutes if the door is open.
→ If the inside light does not come on but the temperature display is  lit up, the lamp (if model comes with an LED lamp) needs replacing.| WARNING
Risk of injury from LED light! The light intensity of the LED lighting corresponds to risk group RG 2.If the cover is removed:▶ Do not look directly into the light at close quarters through optical lenses. Doing so may damage your eyes.▶ Change the lamp (see 6 Maintenance) .
With an ambient temperature below 15 °C the device is slightly warmed in places on the inner surface of the fridge compart‐ ment’s right side wall.| → This is a necessary part of the function.| ▶ This is normal.

Decommissioning

• Switching off the appliance
• Press the On/Off button Fig. 3 (1) until the display goes dark. Release button.
  • If the appliance cannot be switched off, the child lock function is active (see 5.2 Child proofing) .

Taking the appliance out of service

• Empty the appliance.

• Switch off the appliance (see 8 Decommissioning) .

• Remove mains connector.

• Clean the appliance (see 6.2 Cleaning the appliance) .

• Leave the door open to prevent odour.

Disposal

Preparing appliance for disposal
Liebherr uses batteries in some of its appliances. In the EU, for environmental reasons, legislation obliges the end user to remove these batteries before disposing of old appli‐ ances. If your appliance contains batteries, a corresponding notice is attached.

Lamps If you can remove the lamps yourself without destroying them, also remove these before disposal.

• Take the appliance out of operation. (see 8.2 Taking the appliance out of service)
• Appliances with batteries: remove the batteries. For description, see Maintenance chapter.
• If possible: remove lamps without destroying them.

Disposing of the appliance in an environmentally friendly manner

The appliance still contains valuable materials and must be disposed of separately from unsorted municipal waste.

Dispose of batteries separately from the old appliance. To do this, you can return the batteries free of charge to retailers as well as recycling centers and collection centers for recyclable materials.

Lamps Dispose of removed lamps via the respective collection systems.
For Germany: You can dispose of the appli‐ ance free of charge via the class 1 collection containers at the local recycling and recyclable material collection centres. When purchasing a new fridge/freezer, if the sales area > 400 m2 , retailers will also take back the old appliance free of charge.
WARNING
Leaking coolant and oil!
Fire. The coolant contained in the appliance is eco-friendly, but also flammable. The oil contained in the appliance is flammable. Escaping coolant and oil can ignite if the concentration is high enough and in contact with an external heat source.

• Do not damage the pipelines of the coolant circuit and the compressor.
• Transport the appliance without damaging it.
• Dispose of batteries, lamps and the appliance according to the above specifications.

Depending on model and options

Liebherr-Hausgeräte Marica EOOD
4202 Radinovo
Bezirk Plovdiv
Bulgarien
home.liebherr.com

References

• Liebherr

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>