FOSCAM V8EP Outdoor POE IP Security Camera User Manual

FOSCAM V8EP Outdoor POE IP Security Camera User Manual

Overview

Key Features

• 8MP UHD Waterproof IP Camera
• H.264+/H.264 video Compression
• Supports Human detection, Motion Detection and Vehicle Detection
• Compatible with free Foscam Video Management Software
• Compatible with free Foscam iOS and Android APP
• Supports PoE Function
• Supports Full Duplex two-way Audio
• Supports HDR
• Supports 256GB Micro SD Card storage(External)
• Night Vision Range up to 20m(66 feet)
• P2P Feature for Easy Remote Access
• Supports image snapshot
• Supports dual-stream
• Supports remote viewing & record from anywhere anytime
• Multi-level users management with password protection
• Supports multiple network protocols: IP, TCP, UDP, SMTP, FTP, DHCP, RTSP
• Supports Alexa
• Supports Google Assistant

PoE
The Network Camera is PoE-compliant, allowing transmission of power and data via a single Ethernet cable. Such as the following picture: connect the Network Camera to a PoE-enabled router / switch viaEthernet cable.

Read before Use
Please first verify that all contents received are complete according to the Package Contents listed below. Before the Network Camera is installed, please carefully read and follow the instructions in the Quick Setup Guide to avoid damage due to faulty assembly and installation. This also ensures the product is used properlyas intended

Packing Contents

• Camera× 1

|

• Ethernet Cable× 1

---|---

• Quick Setup Guide × 1

|

• Expansion Screws× 1

• Waterproof Lid × 1

|

• Mounting Template × 1

• Surveillance sign× 1

|

Physical Description

Front Panel

Interface

LAN
10/100M adaptive Ethernet interface. Through this interface, IP camera can be connected with various network devices, such as hub, router, etc.

Power Interface
Connect the external power adapter, request for 12V / 1A power.

SD Card Management

This camera supports Micro SD Card. When you plug in the SD card during the camera work process, please reboot the camera again, or else the SD card might not work well. On Foscam app go to the SettingsDevice StatusDevice Status page, you can see the SDcard status .c

Add Device: Connection via the FoscamApp

Scan the QR code below to download and install the Foscam APP.

http://www.foscam.com/d

Please refer to the Quick Setup Guide.

Installation
Please refer to the Quick Setup Guide.

Point the camera at the desired location and use the screws provided to mount it.
Please Note:
Ensure that rain or water will not reach the connector ports at the end of the tail cable. These connectors are not weather-resistant.

Waterproof Lid Installation Guide

When mounting your PoE camera outdoors, you are suggested to install the waterproof lid for it. You may follow the steps for installation

1. Thread the Ethernet cable through the top cover and then the waterproof connector.
   

2. Put the rubber seal ring around the Ethernet cable between the top cover and the waterproof connector.
   
   Note: The rubber seal ring provided has been cut. If not, you may manually cut it.

3. Put on the rubber O-ring to the Ethernet port of the camera and plug the Ethernet cable into the Ethernet port.
   

4.  Align the waterproof connector with the Ethernet port, then twist it clockwise to tighten the two parts.
   

5. Push the rubber seal ring into the waterproof connector, then screw the top cover and lock it into position firmly to finish installation
   

Default Parameters

Default network parameters
IP address : obtain dynamically
Subnet mask: obtain dynamically
Gateway: obtain dynamically

Specification

fps,1080P(19201080)1M/25fps,720P(1280720)1M/15fps
Stream| Dual stream
Image Adjustment| The hue, brightness, contrast, saturation, sharpness are adjustable
Flip Image| flip and mirror
Night Mode| Manual and automatic modes, when the white light is on, the nightvision image is colored
| Night Visibility| With 4pcs IR-LED and spotlight, Night Vision Range up to 20m
---|---|---
**Audio| Input/Output| Built-in mic and speaker, supports full duplex 2-way Audio
Audio Compression| PCM/AAC
Siren| Support maximum 100dB alarm siren
****Network| Ethernet| One 10/100Mbps RJ45 port
Remote Access| P2P
Network Protocol| IP, TCP, UDP, SMTP, FTP, DHCP, RTSP
System Requirements| ** Operating System| Microsoft Windows (Foscam VMS), MacOS (Foscam VMS), Android(Foscam app), iOS (Foscam app)
**Other Features| Motion Detection| Alarm via E-Mail, upload alarm snapshot to FTP
Human Detection| Alarm via E-Mail, upload alarm snapshot to FTP
Vehicle Detection| Alarm via E-Mail, upload alarm snapshot to FTP
User Accounts| Three levels user role
WDR| Improve image clarity in complex scenario
Zoom| 6X digital zoom function
** Storage| Support max. 256GB Micro SD card, local and FTP storage, Foscamcloud storage
Reset| Reset button is available
Intelligent Assistant| Supports Alexa, Google Assistant
**Power| Power Supply| DC 12V/1.0A (Not standard)
POE Standard| 802.3af
Power Consumption| 5 Watts (Max.)
Physical| Dimension(LxWxH)| 170(L)x66 (W)x66 (H)
Net Weight| 342g
****Environment| Waterproof| IP66
Operating Temperature| -20°C ~ 50°C (-4°F ~ 122°F)
Operating Humidity| 10% ~ 80% non-condensing
Storage Temperature| -20°C ~ 50°C (-4°F ~ 122°F)
Storage Humidity| 0% ~ 90% non-condensing
Certification**| FCC, CE, RoHS, IP66, UKCA

For other parts, please refer to the “FOSCAM Camera User Manual

Documents / Resources

| FOSCAM V8EP Outdoor POE IP Security Camera [pdf] User Manual
V8EP Outdoor POE IP Security Camera, V8EP, Outdoor POE IP Security Camera, POE IP Security Camera, IP Security Camera, Security Camera, Camera
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>