eufy E100 Pan-Tilt Outdoor Camera User Guide

: June 10, 2024
: Eufy

Table of Contents

AT A GLANCE
STUP
MOUNTING
SAFETY
NOTICE
Notice (United States Of America)
Customer Service
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

eufy E100 Pan-Tilt Outdoor Camera User Guide

AT A GLANCE

STUP

Connect the camera to power.
Download and install the eufy Security app, then sign up for an account
Follow in-app instructions to complete the setup and connect the camera to your Wi-Fi network.

MOUNTING

Disconnect the camera from power before mounting

Select a Location
Select a location for the desired view:

Make sure the camera can reach a power outlet and receive a strong Wi-Fi signal.
For best results, mount the camera 7-10 ft (2-3 m) above the ground.

Mount the Camera
Mount the camera onto the wall or the ceiling with the provided screws.

Mount the Camera

SAFETY

Do not use the device in the environment at too high or too low temperature, never expose the device to strong sunshine or too wet environment.
The suitable temperature for the device and accessories is temperature is 0°C to 40°C.
It is recommended to supply the device in an environment with a temperature that ranges from 5°C~25°C.
When supplying, please place the device in an environment that has a normal room temperature and good ventilation.
The adapter shall be installed near the equipment and shall be easily accessible.
Please ensure to use only the adapter offered by the manufacturer. Using unauthorized adapter may cause danger and violate the authorization of the device and the guarantee article.

NOTICE

Notice (EU and the United Kingdom)
This product complies with the radio interference requirements of the European Community.

Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.For the declaration of conformity, visit the website: https:// uk.eufylife.com.

This product complies with the radio interference requirements of the United Kingdom

Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance with Radio Equipment Regulations 2017(SI 2017/1206). The full text of the UK declaration of conformity is available at the following internet address:
https://uk.eufylife.com.

This adapter is for indoor use only. The adapter type is TPQ-236A120100VW01 , rated output voltage/current is 12Vdc/1A. The plug is considered as disconnect device of adapter.

RF exposure information:
The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body. Frequency bands and power as below:

Function	Bands	Operation Frequency	Max. Power
Wi-Fi	2.4GHz	2412-2472MHz	EIRP 17.5dBm
5GHz	5725-5850MH	EIRP 13.38dBm

Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
The following importer is the responsible party (contract for EU matters):
Anker Innovations Deutschland GmbH I Georg-MucheStrasse 3, 80807 Munich, Germany
The following importer is the responsible party (contract for UK matters):
Anker Technology (UK) Limited I GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

Notice (United States Of America)

FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, thereis no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.

FCC Radio Frequency Exposure Statement The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/ mobile exposure condition. The min separation distance is 20cm.
Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.

The following importer is the responsible party Company Name: POWER MOBILE LIFE, LLC Address:: 10900 NE 8th St, Ste 501, Bellevue WA 98004 Telephone: 1-800-988-7973