KONKR 20220223 AYANEO Next Handheld Gaming PC Instruction Manual
- June 6, 2024
- KONKR
Table of Contents
POWER ON / SLEEP / WAKE UP / FINGERPRINT
- In the shutdown state, press and hold the switch button for 2 seconds to turn on AYANEO.
- In the power-on state, click the power button to put it into sleep state, and in the sleep state, click to wake it up.
- Support fingerprint recognition, log in with a Microsoft account, Settings > Account > Login options > Fingerprint recognition (Windows Hello), enter and enable fingerprint security login.
- Windows Hello users who have configured fingerprint security to log in can wake up directly to the OS interface by tapping the power button with their registered fingerprints for about 2 seconds, or tap the power button to wake up the screen and then tap to identify the fingerprint to enter the OS inter face , No need to enter PIN and password to log in.
- Long press for 8 seconds to force shutdown.
VOLUME－ / VOLUME＋
- When the machine is turned on, tap Volume＋ to increase the volume step by step, long press to continuously increase the volume. Tap Volume－ to decrease the volume.
AUDIO INTERFACE
- 5 mm headphone jack.
FULL-FEATURED TYPE-C INTERFACE
- USB 3.2
- PD 3.0 fast charge
- DP 1.4 video output
Read the manual at https://[www.ayaneo.com](http://www.ayaneowww.ayaneo.com.com)/manual before using AYANEO . You can also read the paper manual that comes with the package.
BOOT AND SHUT DOWN
Press the power button for 2 seconds to start AYANEO . During the boot process, the indicator light between the two Type-C at the top is always on. The fan will work at the maximum speed. After the self-check, it will return to normal speed and the indicator light will go out. Press and hold the power button for two seconds in the power-on state, and a pull-down shutdown menu will pop up at the top of the screen. Press and hold the power button, touch and slide down (slide to turn off the computer) to complete the AYANEO shutdown operation. Or click on the lower left corner of the screen: Window button> Power> Shut down to turn off AYANEO. Press and hold the power button for 8 seconds in the power-on state to forcibly shut down AYANEO. It is not recommended to force this operation in normal use scenarios.
SLEEP AND WAKE
Press the power button in the power-on state to quickly enter the sleep state,
or click the window button in the lower left corner of the screen>Power>Sleep
to put AYANEO into the sleep state. In the sleep state, the indicator light
between the two Type-Cs at the top is in a regular breathing state. The
cooling fan will stop rotating. Click the power button in sleep state to wake
up AYANEO, Windows Hello has been configured for fingerprint security login.
In the sleep state, touch the power button with the registered fingerprint
finger for about 2 seconds to wake up directly, or touch the power button to
wake up the screen and then touch the fingerprint to enter the OS interface
without entering the PIN and password to log in. After successfully
recognizing and waking up, the indicator light between the two Type-Cs on the
top goes off, and the cooling fan rotates normally. It takes 1~3 seconds to
wake up under
different interfaces to complete the wake-up.
BATTERY AND CHARGING
Do not try to replace the AYANEO battery by yourself, you may damage the
battery, resulting in overheating, fire and personal injury. The lithium-ion
battery of AYANEO should be operated or recycled under the instructions
provided by AYANEO. It must be recycled separately from household waste.
Please dispose of the battery in accordance with local environmental
regulations. The battery can only be replaced by AYANEO or AYANEO authorized
service provider. Replacement with the wrong type of battery may cause an
explosion. When Type-C is plugged into the power supply, avoid prolonged
contact between the skin and the plug, otherwise it may cause
discomfort or injury. Please use the included adapter to charge AYANEO . Do
not use an adapter without safety certification to charge AYANEO. It may cause
damage to internal components and unpredictable danger.
CLEANING
Please use a lint-free cloth to clean AYANEO . Do not let any opening get damp
or use aerosol sprays, solvents or abrasives.
MEDICAL EQUIPMENT INTERFERENCE
Some components inside AYANEO include magnets and radio emission electromagnetic fields. These electromagnetic fields may interfere with medical equipment, pacemakers, defibrillators, or other medical equipment. Please keep a safe distance between the medical equipment and AYANEO . Please consult your physician and medical device manufacturer for medical device information. If you suspect that AYANEO interferes with your pacemaker, defibrillator or other medical equipment, please stop using AYANEO .
AYANEO guarantees that all hardware products and accessories will be within one year from the date of the original retail purchase. AYANEO does not guarantee normal wear and tear, nor does it guarantee damage caused by accidents or abuse. To obtain services, please visit AYANEO mall or AYA
authorized service provider. The available service options depend on the country or region where the requested service is located, and may be restricted to the original country and region of sale. Depending on your location, you may have to pay for phone calls and international shipping costs. When you submit a valid claim according to the warranty service policy, AYANEO will repair, replace or refund your AYANEO as appropriate. Your warranty rights are in addition to the powers provided by local consumer laws. When you make a claim under this warranty policy, you may need to provide details of the proof of purchase.
SUPPORT
For support and troubleshooting information, driver software, and the latest AYA Space downloads, please visit www.ayaneo.com.
FCC COMPPLIANCE
This device complies with the specifications in Part 15 of the FCC Rules. The operating device must meet the following two conditions; (1) This device will not cause harmful interference; (2) This device can withstand any external interference, including interference that may cause unintended operation.
EU COMPPLIANCE
AYANEO hereby declares that this wireless device complies with the directive
2014/53/EU.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party.
Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
The SAR limit adopted by USA and Canada is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The highest SAR value reported to the Federal
Communications Commission (FCC) and the Industry Canada (IC) for this device type when it is tested with hotspot is 0.50W/kg, and that when it is properly worn on the body is 0.48W/kg.
The device complies with the RF specifications when the device is used near your ear or at a distance of 0 mm from your body. Ensure that the device accessories
Such as a device case and a device holster are not composed of metal components. Keep your device 0 mm away from your body to meet the requirement earlier mentioned.
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0 mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
400-039-8088
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>