Gosky FBA_QHAP021 Universal Cell Phone Adapter Mount User Manual

Gosky Universal Digiscoping Smartphone Adapter

 FBA_QHAP021 Universal Cell Phone Adapter

• Compatible with microscope, telescope, binocular, monocular, nightvision, spotting scope etc.

• Two types. Standard type — for eyepiece diameter 28mm-47mm(1.10” -1.85” ).
  Big Type — for eyepiece diameter 32mm-62mm(1.26” – 2.44” ).

• Fits most phones on the market. Width Range: 54-90mm (2.12” -3.54” ).

• Main part is made of Aluminum. Phone clamp is made of high-strength plastic.

For any questions, issues, problems, concerns please contact Gosky customer service directly at email: service@gosky-optics.com.

Product Details

Tips for Spotting Scopes Telescopes

1. Align scope on a target and focus.

2. Insert into the adapter. Screw top kn0b into the end and tighten. Slide shield on adapter to align half-circle with center of eyepiece by sliding down the shicld.

3. Remove adapter from eyepiece and mount the camera. Align the camera lens with the shield half-circle.

4. Turn on your camera slowly insert the adapter.
   Note: Keep the phone VERTICAL to the axis of eyepiece Tighten the eyepiece clamp when it is sharp.
   The image will be clear and in the center of the screen when distance between the Eyepiece and Camera (Eyerelief) is right.

5. If the image is not in the centre, loose the back screw a little and slightly adjust the position of the phone.
   Tighten it when the image is in the center.

6.  Use smartphone zoom to get a full screen.

Tips for Binoculars Monoculars

1. Insert into adapter and tighten. Slide shield on adapter to align half-circle with center of eyepiece by shading down the shield.

2. Remove adapter from eyepiece and mount the camera.
   Align the camera lens with the shield half-circle.

3. Turn on your camera.
   Slowly insert the adapter Tighten the eyepiece clamp when it is sharp.
   Note: Keep the phone VERTICAL to the axis of eyepiece. The image will be clear and in the center of the screen when distance between the Eyepieces and Camera (Eyerelief) s right.

4. Use smartphone zoom to get a full image.

No image ?

Adjust  the distance between the camera and eyepiece(you can loose the top knob and move the adapter. You can also rotate the twist-up eyecup).

Half image ?

To get a whole image, you need to make the centre line of the phone camera and the centre line of the optical device coincide to each other.

Phone clamp just on the power on button ?

Dual lens

Documents / Resources

| Gosky FBA_QHAP021 Universal Cell Phone Adapter Mount [pdf] User Manual
FBA_QHAP021 Universal Cell Phone Adapter Mount, FBA_QHAP021, Universal Cell Phone Adapter Mount, Phone Adapter Mount, Adapter Mount
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>