METRO MARINE F-Series RGBW Elongated Vertical Underwater Lighting Fixture Instructions
- June 13, 2024
- METRO MARINE
Table of Contents
F-Series RGBW Elongated Vertical Underwater Lighting Fixture
Product Information
Product Name: Metro Marine F-Series RGBW Elongated Vertical Underwater
Lighting Fixture
Installation Mounting Template: Yes Included Drill Bits: – Drill Bit
4.60mm (#14 / 0.1820) – Drill Bit 30mm (1 – 1/8)
Product Usage Instructions
- Cut the template along the marked line with scissors and align the arrow with the vertical.
- Place the template in the desired location and use a light adhesive or tape to hold it in place.+
- Using a 30mm or 1 – 1/8 drill bit or step drill bit, drill a center hole clean through.
- Using a 4.6mm or #14 drill bit, drill four holes for the four 5.0mm mounting screws.
- Remove the template and discard it.
Please ensure that you print this information without scaling and confirm that the printout dimensions are accurate to scale as provided.
IMPORTANT
Please print without scaling and confirm print out dimensions are accurate to scale below
RGBW ELONGATED VERTICAL
UNDERWATER LIGHTING FIXTURE
Installation Mounting Template
- Cut the template along the marked line with scissors and align arrow with vertical
- Place the template in the desired location, use a light adhesive or tape to hold it in place.
- Using a 30mm or 1 -1 /8” drill bit or step drill bit, drill center hole clean through.
- Using a 4.6mm or #14 drill bit, drill the 4 holes for the four 5.0mm mounting screws.
- Remove template and discard.
Contact
Questions or Concerns, please contact
- Metro Marine LLC: www.metro-marine.com
- info@metro-marine.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>