METRO MARINE HB-2-FS5 Full Spectrum Hub User Manual
- June 13, 2024
- METRO MARINE
Table of Contents
METRO MARINE F-SERIES
RGBW
HUB
Installation Mounting Template
HB-2-FS5 Full Spectrum Hub
IMPORTANT
Please print without scaling and confirm print out dimensions are accurate to
scale below
Drill Bit
4.60mm
(#14 / 0.1820”)| Drill Bit
4.60mm
(#14 / 0.1820”)
---|---
INTSTALLATION TEMPLATE FOR
METRO MARINE F-SERIES
HUB FOR RGBW
UNDERWATER LIGHTING FIXTURE(S)
- Cut the template along the marked line with scissors.
- Place the template in the desired location, use a light adhesive or tape to hold it in place.
- Using a 4.6mm or #14 drill bit, drill the 4 holes for the four 5.0mm mounting screws.
- Remove template and discard.
https://www.metro-marine.com/support
Questions or Concerns, please contact Metro Marine LLC:
www.metro-marine.com
• info@metro-marine.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>