METRO MARINE BMR1-FS-90 High Output Submersible Underwater Light w/Intelligent Full Spectrum LED’s User Manual
- June 13, 2024
- METRO MARINE
Table of Contents
METRO MARINE BMR1-FS-90 High Output Submersible Underwater Light
w/Intelligent Full Spectrum LED’s
Product Information
The product is the Metro Marine F-Series RGBW Round Underwater Lighting Fixture. It is designed for underwater use and provides illumination with RGBW colors. The fixture comes with an installation mounting template and requires the use of a 4.60mm (#14 / 0.1820) drill bit and a 30mm (1 – 1/8) drill bit for installation. The template is also provided for the installation of the Metro Marine F-Series Single Color Round Underwater Lighting Fixture.
Product Usage Instructions
- Cut out the template with scissors along the marked line.
- Place the template in the desired location and use a light adhesive or tape to hold it in place.
- Using a 30mm or 1 – 1/8 drill bit or step drill bit, drill a center hole clean through.
- Using a 4.6mm or #14 drill bit, drill the three holes for the four 5.0mm mounting screws.
- Remove the template and discard it.
IMPORTANT Please print without scaling and confirm print out dimensions
are accurate to scale below:
INTSTALLATION TEMPLATE
INTSTALLATION TEMPLATE FOR METRO MARINE F-SERIES SINGLE COLOR ROUND UNDERWATER
LIGHTING FIXTURE:
- Cut out the template with scissors along the marked line.
- Place the template in the desired location, use a light adhesive or tape to hold it in place.
- Using a 30mm or 1 – 1/8” drill bit or step drill bit, drill center hole clean through.
- Using a 4.6mm or #14 drill bit, drill the 3 holes for the four 5.0mm mounting screws.
- Remove template and discard.
Questions or Concerns, please contact Metro Marine LLC: www.metro- marine.com • [email protected]