allen roth FSI 6802A MBLK Bexley 36-in to 72-in Matte Black Steel Single Curtain Rod Instruction Manual

FSI 6802A MBLK Bexley 36-in to 72-in Matte Black Steel Single Curtain Rod

Product Information

• Product Name: Drapery Rod Set
• Trademark: ALLEN+ROTH and logo design
• Trademarks owned by: LF, LLC

Product Usage Instructions

1. Estimated Assembly Time: 30 minutes
2. Make sure to use a level (not included) during installation.
3. If possible, place the curtain hooks on the rod.
4. Use the provided screws and anchor plugs if necessary.
5. Package Contents:
   • A – Quantity: 3
   • B – Quantity: 2
6. Hardware Contents:
   • AA – Quantity: 3
   • BB – Quantity: 6
   • CC – Quantity: 6
   • B – Quantity: 1
   • A – Quantity: 1
7. To lock the rod in place:
8. Put the end cap back in place and tighten it.
9. Hang the ready rod on the brackets.

ALLEN+ROTH and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.

MODEL
Thank you for purchasing this allen + roth product. We’ve created these easy- to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 866-439-9800, 8 a.m. – 8 p.m., EST, Monday – Sunday. You could also contact us at partsplus@lowes.com.

TROUBLESHOOTING

during installation .
|
|
|
Drapery rod hook is loose| Drapery hooks not anchored correctly.| Attach drapery hooks to wall studs if possible. Use anchors and screws supplied if you can’t attach to stud.

CARE AND MAINTENANCE

• Clean with a soft cloth.
• Do not use abrasive cleaning agents, solvents or polishes as they may damage the finish.

FEELING CONFIDENT? START YOUR NEXT PROJECT/CONFIANT?
Visit lowes.com for more information

PREPARATION

• Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
• If any part is missing or damaged, do not attempt to assemble the product

Estimated Assembly Time: 30 minutes

TOOLS REQUIRED (NOT INCLUDED)

PACKAGE CONTENTS HARDWARE CONTENTS

INSTALLATION OVERVIEW

1. Using bracket as a guide, adjust to desired height and mark location on wall for mounting screws

2. Remove bracket from wall. Drill pilot hole using 3/16 in. bit (not included) and insert wall anchors
   NOTE: Anchors are not needed for all installation types

3. Attach bracket to wall using screws provided NOTE: Repeat steps 1 to 3 for additional brackets. Use level (not included) if necessary

4. Extend telescopic rod slightly. Remove finial from smaller diameter rod section.

5. Slide additional rod over smaller diameter rod

6. NOTE: At this point you should have a complete telescopic rod with 2 large diameter rods connected with 1 smaller diameter rod section in the middle

7. NOTE: Add drapery (sold separately), extend rod to desired length and hang ready rod in brackets.

8. Reattach finial and tighten set screws on brackets to lock rod in place

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>