Qeedji NAPOE109ft Ethernet PoE Adapter User Manual
- June 16, 2024
- Qeedji
Table of Contents
Qeedji NAPOE109ft Ethernet PoE Adapter
Product Information
Specifications
- Product Name: NAPOE109ft
- Version: 1.10.12 (005A_en)
- Product Type: Ethernet PoE RJ45F to POGO adapter
- Compatibility: Suitable for TAB10s device
- Power Supply: Ethernet cable supporting PoE IEEE802.3af
- Indoor Use Only: Yes
Precautions for Use
- Installation and maintenance must be carried out by professionals.
- Do not use the device near water.
- Do not place anything on top of the device, including liquids or flammable materials.
- Do not expose the device to direct sunlight, near a heat source, or in a place susceptible to dust, vibration, or shock.
Description and Installation
Introduction
The NAPOE109ft device is an Ethernet PoE RJ45F to POGO adapter designed for
use with the TAB10s device. It provides power supply and IP network
connectivity when connected to an Ethernet cable supporting PoE IEEE802.3af.
Recommendations and Warnings
This device is intended for indoor use only.
Package Contents
- NAPOE109ft device x 1
- 3M double-sided tape (W x H x D): 65 mm x 19 mm x 0.6 mm x 3
Faces
Front Face
The front face of the NAPOE109ft device features electrical pads supporting
data and power delivery, beveled support to hang the TAB10s device, holes to
host screws to lock the TAB10s device on the NAPOE109ft device, LAN RJ45
connector PoE, holes to input the RJ45 cable by the left side or by the right
side of the NAPOE109ft device, bumpers (provided), and holes to fix the
NAPOE109ft device on a wall partition with screws.
Side Face
The side face of the NAPOE109ft device features electrical pads supporting
data and power delivery, beveled support to hang the TAB10s device, holes to
host screws to lock the TAB10s device on the NAPOE109ft device, LAN RJ45
connector PoE, holes to input the RJ45 cable by the bottom of the NAPOE109ft
device, bumpers (provided), and holes to fix the NAPOE109ft device on a wall
partition with screws.
FAQ
- Q: Can I use the NAPOE109ft device outdoors?
- A: No, the NAPOE109ft device is designed for indoor use only.
- Q: What type of Ethernet cable does the NAPOE109ft device support?
- A: The NAPOE109ft device supports Ethernet cables that are compatible with PoE IEEE802.3af.
- Q: How should I install the NAPOE109ft device?
- A: The NAPOE109ft device can be installed on a partition wall with screw-in dowels or a glass wall with adhesive tapes. Please refer to the installation instructions in the manual for detailed steps.
Legal notice
NAPOE109ft 1.10.12 (005A_en) © 2021 Qeedji
Rights and Responsibilities
All rights reserved. No part of this manual may be reproduced in any form or
by any means whatsoever. or by any means whatsoever without the written
permission of the publisher. The products and services mentioned herein may be
trademarks and/or service marks of the publisher. or trademarks of their
respective owners. The publisher and the author do not claim any rights to
these Marks.
Although every precaution has been taken in the preparation of this document, the publisher and the author assume no liability for errors or omissions, or for damages resulting from the use of the information contained in this document or the use of programs and source code that can go with it. Under no circumstances can the publisher and the author be held responsible for any loss of profits or any other commercial prejudice caused or alleged to have been caused directly or indirectly by this document.
Product information
Product design and specifications are subject to change at any time and
Qeedji reserves the right to modify them without notice. This includes the
hardware, the embedded software, and this manual, which should be considered
as a general guide to the product. The accessories supplied with the product
may differ slightly from those described in this manual, depending on the
developments of the various suppliers.
Precautions for use
Please read and heed the following warnings before turning on the power: –
installation and maintenance must be carried out by professionals. – do not
use the device near water. – do not place anything on top of the device,
including liquids (beverages) or flammable materials (fabrics, paper). – do not
expose the device to direct sunlight, near a heat source, or in a place
susceptible to dust, vibration, or shock.
Warranty clauses
The Qeedji device is guaranteed against material and manufacturing defects
for a certain duration. Check the device warranty duration value at the end of
the document. These warranty conditions do not apply if the failure is the
result of improper use of the device, inappropriate maintenance, unauthorized
modification, operation in an unspecified environment (see operating precautions
at the beginning of the manual), or if the device has been damaged by shock or
fall, incorrect operation, improper connection, lightning, insufficient
protection against heat, humidity or frost.
WEEE Directive
This symbol means that your appliance at the end of its service life must
not be disposed of with household waste, but must be taken to a collection
point for waste electrical and electronic equipment or returned to your
dealer. Your action will protect the environment. In this context, a
collection and recycling system has been set up by the European Union.
Description and installation
Introduction
The NAPOE109ft device is an Ethernet PoE RJ45F to POGO adapter suitable for
TAB10s devices. Once connected to an Ethernet cable supporting PoE, it can
provide power supply and IP network connectivity to a TAB10s device. The
NAPOE109ft device is intended to be plugged into an Ethernet RJ45 supporting
PoE IEEE802.3af.
This manual explains how to install the NAPOE109ft device:
- on a partition wall with screw-in dowels or
- on a glass wall with adhesive tape.
Recommendations and warnings
This device is designed for indoor use only.
Package Contents
| Items | Description | Quantity |
|---|---|---|
| Device | NAPOE109ft device | 1 |
| Adhesive tapes | 3M double sided tape (W x H x D): 65 mm x 19 mm x 0.6 mm | 3 |
In this documentation, the unit of measurement for dimensions is done in millimeters followed by its equivalent value in inches.
Faces
Front face
- 1 beveled support to hang the TAB10s device¹,
- 2 electrical pads supporting data and power delivery,
- 3 4 5 6 holes to fix the device to the wall with screws,
- 7 8 holes to host black screws² to lock the TAB10s device on the beveled support,
- 9 10 screws mounted at the factory (must never be unmounted),
- 11 metal frames.
- The beveled support is fixed at the factory to the metal frame of the NAPOE109ft device with grey screws which must never be unmounted.
- TSuitablescrews are provided with the TAB10s device.
Side face
- electrical pads supporting data and power delivery,
- beveled support to hang the TAB10s device,
- holes to host screws to lock the TAB10s device on the NAPOE109ft device,
- LAN RJ45 connector PoE,
- holes to input the RJ45 cable by the left side or by the right side of the NAPOE109ft device,
- bumpers (provided),
- holes to fix the NAPOE109ft device on a wall partition with screws.
Bottom face
- electrical pads supporting data and power delivery,
- beveled support to hang and lock the TAB10s device.
- holes to host screws to lock the TAB10s device on the NAPOE109ft device,
- LAN RJ45 connector PoE,
- holes to input the RJ45 cable by the bottom of the NAPOE109ft device,
- bumpers (provided),
- holes to fix the NAPOE109ft device on a wall partition with screws.
Device dimensions
Labeling
Product label
The model of the device, the power supply characteristics, the serial
number (PSN), and the MAC address are written on a label stuck on the case.
☛ The QR code on the product label corresponds to the product identification URL, for example, i.qeedji.tech?model=NAPOE109ft&sn=01420-00001&mac.lan1=00-1C-E6-02-52-63 .
☛ FCC certification is pending.
Packing box label
This is the label stuck also on the packing box. It shows:
- the device model,
- the product serial number (PSN) (embedded also in the QR code),
- and the manufacturer’s Website.
☛ The QR code on the packing box label corresponds to the product PSN, for
example, PSN01420-00001 CD4.
☛ The serial number of the device could be requested in case of technical
support.
Connectors
LAN connector
Ethernet RJ-45. 10/100 BaseT. It is recommended to use shielded cables.
POGO connector
The electric pad of the POGO connector supports data and power delivery. This
is the POGO connector pinout.
| PIN | Information |
|---|---|
| 1 | VCC |
| 2 | DATA- |
| 3 | DATA+ |
| 4 | GND |
Drilling pattern
In case the NAPOE109ft device must be fixed on a wall partition with pierceable
material, follow the drilling pattern information to drill the holes to
install the four dowels.
☛ The screws and dowels required to fix the NAPOE109ft device on the wall are not provided with the product. They depend on the wall material.
If the NAPOE109ft device must be fixed on a wall partition that is not pierceable, for example, a glass wall, follow the adhesive pattern information to stick with the two provided adhesive tapes.
Adhesive pattern
The adhesive pattern information is suitable for sticking the NAPOE109ft
product with the two provided adhesive tapes.
Clean carefully then degrease perfectly the surface of the wall and the surface of the metal frame before sticking the adhesive tapes.
☛ This is an example of a degreasing product preconized by Qeedji: manufacturer 3M, model 22779.
With your fingers, stick first the three adhesive tapes on the metal frame at
the back of the product explained.
- Place the product on the edge of a table as explained, taking care not to damage the electrical PADs of the POGO connector. Apply a very high pressure above all the surfaces of the three adhesive tapes 1, 2, and 3 with your thumb so that all the surfaces of the three adhesive tapes are perfectly stuck on the metal frame.
Once stuck on the glass wall, it should be very difficult to unstick the NAPOE109ft device from the wall. So, before sticking the NAPOE109ft device, information, reference chapter Device Tate marker on the wall to show at which height the NAPOET09 device must be installed. For further- Remove the remaining adhesive tape protection.
Turn the unit the right way around and help with a spirit level, stick the product horizontally on the glass wall at the right height. With your fingers, press firmly on the metal frame against the glass wall above the three adhesive tapes to ensure that all the surface of the adhesive tapes is perfectly stuck.
If the adhesive tape sticking is not homogeneous as shown below, press firmly again over the areas that need it.
Device fixture
Installation height
To know the NAPOE109ft device fixture height, refer to the legislation in
force in your country, related to the accessibility to disabled persons of
establishments open to the public during their construction and of facilities
open to the public during their development.
☛ The legislation in force in France implies installing the top of the screen area at 130 cm (or 51,18 “) maximum far from the floor. Remove 2.2 cm (or 0,78 “) to this height to determine the height of the two upper drilling holes. For example, for the France country, the hole center should be drilled at (130 – 2.2) = 127.8 cm (50,3 “) far from the floor.
Technical information
Technical specifications
| Model | Manufacturer |
|---|---|
| NAPOE109ft | Qeedji |
| Power supply | Information |
| --- | --- |
| PoE IEEE802.3af | POE power supply input: ES1 / PS2 (48 V – 0.27 A) |
Network: 1x Ethernet 10/100 BaseT PoE
| Data | Information |
|---|---|
| POGO connector | USB 2.0 |
| Power delivery | Information |
| --- | --- |
POGO connector
| Output power supply: 5.15 V – 1.45 A type.
Max. absolute values: 5.47 V max., 1.92 A max., 9.4 W max.
| Operating temperature | Storage temperature |
|---|---|
| +0 °C to +35 °C | -20 °C to +60 °C |
| +32 °F to +95 °F | -4 °F to +140 °F |
| Operating humidity | Storage humidity |
| --- | --- |
| < 80 % | < 85 % |
| Weight | Dimensions (W x H x D) |
| --- | --- |
| 354 g | 195 mm x 138.5 mm x 16 mm |
| 0.780 lb | 7.67 ” x 5.43 ” x 0.63 “ |
Plastic enclosure flame rating: UL 94 V-0
Warranty: 1 year
Conformities
EUROPE
In conformity with the following European directives:
- LVD 2014/35/EU
- EMC 2014/30/EU
- RED 2014/53/EU
Contacts
For further information, please contact us:
Technical support :
[email protected],
Sales department: [email protected]. Refer to
the Qeedji Website for FAQ, application notes, and software downloads:
https://www.qeedji.tech/
Qeedji FRANCE INNES SA 5A rue Pierre Joseph Colin 35700 RENNES
Tel : +33 (0)2 23 20 01 62
Fax : +33 (0)2 23 20 22 59