allen roth FSI 1331B DORB Kirby 72-in to 144-in Dark Oil-Rubbed Bronze Steel Single Curtain Rod Instruction Manual
- June 13, 2024
- Allen+Roth
Table of Contents
allen roth FSI 1331B DORB Kirby 72-in to 144-in Dark Oil-Rubbed Bronze
Steel Single Curtain Rod
Product Information
The ALLEN+ROTH Drapery Rod Set is a high-quality product designed for hanging curtains. It is trademarked and manufactured by LF, LLC. This set includes all the necessary hardware for installation, including rods, brackets, screws, and anchors. The estimated assembly time for this product is 30 minutes.
Product Usage Instructions
- Before starting the installation, make sure to use a level (not included) to ensure proper alignment.
- If needed, use the provided screws and anchors to secure the brackets in place.
- Attach the curtain hooks to the rod.
- Place the rod into the brackets and secure it in place by tightening the locking mechanism.
- Repeat the above steps for each rod in the set.
- Once all rods are installed, hang the curtains on the hooks and adjust them as desired.
For care and maintenance, regularly clean the drapery rod set using a soft
cloth and mild detergent. Avoid using abrasive cleaners or harsh chemicals
that may damage the finish. Additionally, periodically tighten any loose
screws or brackets to ensure stability and longevity of the product.
ALLEN+ROTH and logo design are trademarks or registered trademarks of LF, LLC.
All rights reserved.
Thank you for purchasing this allen + roth product. We’ve created these easy-
to-follow instructions to ensure you spend your time enjoying the product
instead of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item number and refer to the
Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at
866-439-9800, 8 a.m. – 8 p.m., EST,
Monday – Sunday. You could also contact us at
partsplus@lowes.com
Image is for example only. Appearance of actual product may vary
TROUBLESHOOTING
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is
missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 30 minutes
TOOLS REQUIRED (NOT INCLUDED)
FEELING CONFIDENT? START YOUR NEXT PROJECT
CARE AND MAINTENANCE
Clean with a soft cloth.
Do not use abrasive cleaning agents, solvents or polishes as they may damage
the finish.
PACKAGE CONTENTS
HARDWARE CONTENTS
INSTALLATION OVERVIEW
-
Using bracket as a guide, adjust to desired height and mark location on wall for mounting screws
-
Remove bracket from wall. Drill pilot hole using 3/16 in. bit (not included) and insert wall anchors.
NOTE
Anchors are not needed for all installation types.. -
Attach bracket to wall using screws provided
NOTE
Repeat steps 1 to 3 for additional brackets. Use level (not included) if necessary. -
Extend telescopic rod slightly. Remove finial from smaller diameter rod section.
-
Slide additional rod over smaller diameter rod.
NOTE
At this point you should have a complete telescopic rod with 2 large diameter rods connected with 1 smaller diameter rod section in the middle.
NOTE
Add drapery (sold separately), extend rod to desired length and hang ready rod in brackets. -
Reattach finial and tighten set screws on brackets to lock rod in place.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>