2E-AHC2000 Series Industrial Fan Heater User Manual

: June 13, 2024
: 2E

Table of Contents

2E-AHC2000 Series Industrial Fan Heater
Product Information
Product Usage Instructions
WARNING
Special safety regulations
Introduction
Technical specifications
Description of Control Panel
Using Instructions
Cleaning and Maintenance
Trouble shooting
Disposal
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

2E-AHC2000 Series Industrial Fan Heater

2E-AHC2000-Series-Industrial-Fan-Heater-image

Product Information

Product Name: Industrial Fan Heater
Model: 2E-AHC2000; 2E-AHC3000
Technical Specifications:
- Dimensions: 265x210x290 mm
- Weight: 2.85 Kg
- Housing Material: Steel plate coated with heat-resistant powder
- Control Panel: Left Knob for heat setting, Right Knob for thermostat dial
- Power Source: Voltage required
- Frequency: Frequency current
- Thermostat: Self-resetting
- Heating Area: Indicators of the heating area are valid only under the condition of sufficient thermal insulation of the room
- Air Output: Air output value

Product Usage Instructions

Read and follow all instructions in the user manual carefully.
Place the user manual in a safe place for future reference.
Ensure that anyone assembling, lighting, adjusting, or operating the heater has read and understood the instructions.
This product is only suitable for well-insulated spaces or occasional use.
To operate the heater:
- Ensure that the plug is securely connected to the socket.
- If there is no power in the socket outlet, check the power supply.
- Use the appropriate voltage according to the rating on the label.
- Ensure that the air inlet grill is not blocked by any objects.
- Turn the left knob to select the desired heat setting.
- Adjust the thermostat dial on the right knob to set the desired room temperature.
To clean and maintain the heater:
- Turn off the heater and unplug it from the power source.
- Inspect and clean the inlet and outlet for any blockages.
If you encounter any issues with the heater, refer to the troubleshooting section in the user manual before calling for service.
For abnormal noise, ensure that the heater is placed on a level surface.

READ INSTRUCTIONS CAREFULLY: Read and follow all instructions. Place instructions in a safe place for future reference. Do not allow anyone who has not read these instructions to assemble, light, adjust or operate the heater.
This product is only suitable for well insulated spaces or occasional use.
All indicators of the heating area are valid only under the condition of sufficient thermal insulation of the room where the heat gun will be used.

WARNING

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Children should not play with the device. Cleaning and maintenance by the consumer should not be carried out by children without supervision.
WARNING: To prevent overheating, it is forbidden to cover the heater!
Children under the age of 3 should be kept as far away from the devices as possible if they are not constantly monitored.
Children aged 3 to 8 years can only turn the appliance on/off, provided that the appliance is placed/installed in the normal operating position provided for it. In addition, children should be provided with appropriate supervision or instructions for the safe use of the appliance, and they are aware of the risks of danger that may arise when using the appliance. Children aged 3 to 8 years should not connect the appliance to the power supply network (plug socket), adjust and clean the appliance or perform maintenance work carried out by the user.
CAUTION! Some parts of this product can be very hot and cause burns. Particular attention should be paid to where children and vulnerable people are.

Special safety regulations

Check the integrity of the product before use.
When using electrical appliance basic precautions should always be followed including below:
The fan heater is not suitable for use outdoors in damp weather, in bathrooms or in other wet or damp environments.
Please note that the fan heater can become very hot and should, therefore, be placed at a safe distance from flammable objects such as furniture, curtains and similar.
Do not cover the fan heater.
The fan heater must not be located immediately below a socket outlet.
Do not connect the fan heater using an on/off timer or other equipment which can automatically switch the device on.
The fan heater must not be placed in rooms where flammable liquids or gases are used or stored.
If an extension cord is used, it must be as short as possible and always be fully extended.
You must not connect other appliances to the same mains socket as the fan heater.
Do not use this fan heater in the immediate surroundings of a bath, a shower or a swimming pool.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Make sure heater is always under surveillance and keep children and animals away from it.
Do not place the appliance on moving vehicles or some where easy to be tipped over.
When you don’t use the appliance for a long time, unplug the appliance. Don’t leave the heater for a considerable amount of time when in use. Pull the plug straight out, never remove the plug by pulling on the cord.
Keep the heater far from curtain or places where the air inlet can easily be blocked.
The power coupler is waterproof when not in use. In order to prevent possible electric shock or leakage current ,never use the appliance with wet hand or operate the appliance when there is water on the power cord.
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact you local government for information regarding the collection systems available. If electrical appliance are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.

Introduction

It incorporates a thermostat and a self-resetting thermal cut-out to control the heating elements. The thermostat feels the air temperature and controls the surrounding temperature. The fan motor is controlled by thermostat and it stops when the thermostat cuts off the heating element. The self-resetting thermal cut-out will switch off the heater to ensure the safety when overheating.

Technical specifications

Model	2E- AHC2000	2E- AHC3000
Voltage	220-240 V~	220-240 V~
required power	2000 W	3000 W
Frequency	50 Hz	50 Hz
current	8.3-9.1 A	12.5-13.6A
Setting	1000-2000 W	1500-3000 W
Self-resetting Thermostat	68 °C	85 °C
Heating area	20 m2	30 m2
Air output	197 m3/h	280 m3/h
Product meas	210×160×217 mm	265x210x290 mm
N.W.	1.55 Kg	2.85 Kg

Housing of steel plate and coated by heat-resistant powder.
Supplied with the instruction manual.

Description of Control Panel

2E-AHC2000-Series-Industrial-Fan-Heater-fig1

Left Knob: selector with heat setting
Right Knob: Thermostat dial

Using Instructions

Position the fan heater so that it stands upright on a firm surface and at a safe distance from wet environments and flammable objects.
Connect the fan heater to the mains.
Set the thermostat knob to the MAX and let the heater operate with full power.
The fan heater will switch on when the heating selector is set to one of the power settings.
Once the room reaches the required temperature, heating element will stop working.Once the temperature decreased, the heating element will be working. The fan heater now starts and stops automatically and thus keeps the room temperature constant.
Before switch off the heater, please turn the thermostat to MIN position and turn the switch to fan position, let the appliance cool down for two minutes then turn off the heater and pull out the plug.

Cleaning and Maintenance

Before cleaning the appliance,disconnect it from the socket and let it cool down. The enclosure is easily to get dirty, wipe it often with soft sponge. For every dirty parts, wipe with a sponge dipped in < 50 °C water and mild detergent,then dry the heater enclosure with clean cloth. Be careful not to let the water enter the appliance inner. Don’t splash water onto the heater,never use solvent like gasoline etc. to clean the heater,in order to protect the enclosure.
Clean the cord and plug,dry and pack it in a plastic bag.
When you store the heater, let it cool down first, keep it dry. Then cover it with a plastic bag, put in a packing box and store it in a dry, ventilated place.

Trouble shooting

You can solve many common problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the service center.

Problem	Possible cause	Treatment

The heater does not operate,even when it is plugged in and the switch, thermostat are switched on .| The plug is loose, bad connection| Pull out the plug, check the connection of the plug and socket. Then connect again.
No power in socket outlet| Insert the plug in a proper socket

The heating element glowing

| The input voltage is too high or too low| Use power supply according to the rating on the label

The air inlet grill is blocked

| Keep the heater far way from articles like curtain, plastic bag, paper and other things which can cover the inlet or can be easily cover on the air inlet

The appliance didn’t heat up, or only ventilator worked

| The switch was not put at heating setting| Turn the switch to heat setting

The thermostat operated

| Turn the thermostat and listen if there is open/close voice. If there is no click and the thermostat is not damaged, the heater will automatic switch on when the appliance cooled down

Manual reset cut-out operated

| Turn the heater off and inspect the blockage of inlet or outlet. Disconnect the plug and wait at least 10 minutes for the protection system to reset before attempting to restart the heater.
Abnormal noise| The appliance is not stands upright| Put the heater on a level surface
Model identifier(s): 2E-AHC2000

Pmin

|

1.0

|

kW

| Manual heat charge control with room and/or outdoor temperature feedback| [no]
Maximum continuous heat output|

Pmax

|

2

|

kW

| Electronic heat charge control with room and/or outdoor temperature feedback| [no]
Auxiliary electricity consumption| Fan assisted heat output| [no]
At nominal heat output| elmax| N/A| kW| Type of heat output/room temperature control (select one)
At minimum heat output| elmin| N/A| kW| Single stage heat output and no room temperature control| [no]
In standby mode| elSB| N/A| W| Two or more manual stages, no room temperature control| [no]
| | | | With mechanic thermostat room temperature control| [yes]
| | | | With electronic room temperature control| [no]
| | | | Electronic room temperature control plus day timer| [no]
| | | | Electronic room temperature control plus week timer| [no]
| | | | Other control options (multiple selections possible)
| | | | Room temperature control, with presence detection| [no]
| | | | Room temperature control, with open window detection| [no]
| | | | With distance control option| [no]
| | | | With adaptive start control| [no]
| | | | With working time limitation| [no]
| | | | With black bulb sensor| [no]
Remark:

For electric local space heaters, the measured seasonal space heating energy efficiency ηs cannot be worse than the declared value at the nominal heat output of the unit.

Model identifier(s): 2E-AHC3000

Pmin

|

1.5

|

kW

| Manual heat charge control with room and/or outdoor temperature feedback| [no]
Maximum continuous heat output|

Pmax

|

3

|

kW

| Electronic heat charge control with room and/or outdoor temperature feedback| [no]
Auxiliary electricity consumption| Fan assisted heat output| [no]
At nominal heat output| elmax| N/A| kW| Type of heat output/room temperature control (select one)
At minimum heat output| elmin| N/A| kW| Single stage heat output and no room temperature control| [no]
In standby mode| elSB| N/A| W| Two or more manual stages, no room temperature control| [no]
| | | | With mechanic thermostat room temperature control| [yes]
| | | | With electronic room temperature control| [no]
| | | | Electronic room temperature control plus day timer| [no]
| | | | Electronic room temperature control plus week timer| [no]
| | | | Other control options (multiple selections possible)
| | | | Room temperature control, with presence detection| [no]
| | | | Room temperature control, with open window detection| [no]
| | | | With distance control option| [no]
| | | | With adaptive start control| [no]
| | | | With working time limitation| [no]
| | | | With black bulb sensor| [no]
Remark:

For electric local space heaters, the measured seasonal space heating energy efficiency ηs cannot be worse than the declared value at the nominal heat output of the unit.

Disposal

Environmental Protection
Waste electrical production should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.

Тel.: 0 800 300 345; (044) 230 34 84; 390 55 12
www.erc.ua/service