2E F2422B LCD Monitor User Manual
- June 13, 2024
- 2E
Table of Contents
LCD MONITOR
F2422B; F2723B
User Manual
Read this manual carefully before use.
Warnings/Safety precautions
WARNINGS/SAFETY PRECAUTIONS
RISK OF ELECTRIC SHOCK DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER AND BACK PANEL THERE
ARE NO USER-SERVICEABLE PARTS INSIDE.
I CASE OF DAMAGE OR ERROR REFER SERVICING TO QUALIFIED PERSONNEL.
Lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of non-insulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock in case of improper usage of the product.
Exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance instructions
in the literature accompanying the product.
WARNING:
Do not put the monitor in rainy or foggy places to prevent from fire or
electric shock.
To prevent scratches or damages to the LCD screen, do not knock, apply or rub
the surface with sharp or hard objects or stiff cloths as well as try not to
touch the LCD screen with your hands.
Any modifications to this product that have not been clearly and explicitly
approved in advance by the manufacturer responsible for compliance with these
regulations are forbidden.
ATTENTION:
Excessive sound pressure from earphones and headphones can cause hearing loss.
Important safety instructions
- Please read all the instructions carefully before using this product.
- The instructions should be retained after reading for future reference.
- Please immediately pull out the AC power plug from an adapter if there is an abnormal sound or smell or the monitor has no picture, and contact after sales support.
- The monitor should be kept free from rain, damp and dust to prevent electrical shock and short circuits. Do not cover the ventilation openings with table clothes, curtains, newspapers etc.
- The monitor should be kept away from heating objects or direct sunlight. This product requires good ventilation. Allow 10 cm between the monitor and other appliances or built-in cabinet walls.
- You may clean the display panel with a soft clean cloth after pulling out the power plug. Do not repeatedly wipe the panel, nor scrape, tap or strike the panel with hard objects, etc.
- Do not wipe the monitor with any petrol chemical or alcohol-based solvents, as it will lead to product damage to the panel and cabinet.
- Do not place the monitor on an unstable surface.
- Do not place the power cord or other cables across a walkway in case it is trampled on, especially at the points of connection to the plug, sockets and the power cord to the appliance.
- Unplug the appliance during a lightning storm or when it is not used for a long period of time.
- Unplug this product when the device, power cord or plug are damaged or if the device has been exposed to liquid or moisture, has been mechanically damaged and does not work properly and contact an authorized service centre immediately.
- Keep this appliance away from liquids, splashes of water and do not place objects filled with liquids on it.
- Do not disassemble the back cover as it contains high voltages inside and will cause electric shock. There is no spare parts inside. Internal adjustments and checks should only be conducted by qualified professionals.
- Do not place naked flame sources, such as lit candles on or near the monitor. Please pull out the power plug and contact after sales support if there are abnormal objects or water in the monitor.
Operating Instructions
Components and auxiliary equipment
Before assembling and installing, check for following items to be included in
this display package.
Input voltage
F2422B: DC 12V 2.5A power input. External power supply: AС 100-240V – 50/60Hz
0.8A.
F2723B: DC 12V 3A power input. External power supply: AС 100-240V – 50/60Hz
1.0A.
Power indicator
| Indicator | Mode |
|---|---|
| No light | Power off |
| Light | Normal operation mode |
| Flash light | No input signal |
Functions
Statement: this document is a reference manual. Please refer tol the actual product.
| HDMI| HDMI input
---|---|---
| VGA| VGA input
| DC input 12V| DC 12V power input
Control monitor
Control with 5 buttons:
| MENU | MENU key |
|---|---|
| ◀ | LEFT key/Contrast hot key |
| ▶ | RIGHT key/Brightness hot key |
| AUTO | Auto/Exit key |
| **** | Power standby key |
Function Key Guide may vary depending on the function or product model. Please refer to the actual product.
OSD menu
BRIGHTNESS
In this section, you can adjust brightness, contrast, and other display
settings.
BRIGHTNESS – This setting adjusts dark color balance of the image. If the
value is set too high, the image will look blurred. If the value is set too
low, the image will be too dark and will not have clear outlines.
CONTRAST – This setting adjusts white balance of the image. If the value
is set too high, the image will be too bright and will not have clear
outlines. If the value is set too low, the image will look blurred.
ECO – This setting has several standard display modes: Standard, Movie,
Text, Game, FPS, RTS.
DCR (DYNAMIC CONTRAST) – Allows you to automatically adjust brightness
and contrast of the screen to display darker areas of the image.
IMAGE
In this section, you can adjust image position on the monitor screen.
H.POSITION – This setting adjusts horizontal position of the image.
V.POSITION – This setting adjusts vertical position of the image.
CLOCK – This setting changes width of the image.
PHASE – This setting reduces halos and makes the image clearer.
ASPECT – Allows you to select the following image formats: «Wide» (16:9)
or «4:3».
COLOR
In this section, you can adjust color temperature.
COLOR TEMP. – This setting allows you to select one of the color presets:
Cool, Custom, Warm, Normal.
RED – This setting adjusts display intensity of red color.
GREEN – This setting adjusts display intensity of green color.
BLUE – This setting adjusts display intensity of blue color.
LOW BLUE FILTER – Provides comfort when working for a long time, reduces
eye strain.
OSD SETTING
In this section, you can change and adjust the on-screen menu settings.
LANGUAGE – This setting allows you to select the on-screen menu language.
OSD H.POS. – This setting allows you to adjust horizontal position of the
on-screen menu.
OSD V.POS – This setting allows you to adjust vertical position of the
on-screen menu.
OSD TIMER – This setting allows you to set display time of the on-screen
menu.
TRANSPARENCY – This setting helps you adjust the transparency of the on-
screen menu.
RESET
In this section, you can automatically adjust basic image settings and reset
all settings to their default values.
IMAGE AUTO ADJUST – Automatically adjusts image settings.
COLOR AUTO ADJUST – Automatically adjusts image color settings.
RESET – This setting resets all the on-screen menu settings to their
default values.
MISC
Includes advanced image and sound settings.
SIGNAL SOURCE – Allows you to select the port through which the input
video signal will be fed to the monitor:
HDMI – Sets the HDMI port as the monitor video source.
VGA – Sets the VGA port as the monitor video source.
Please note: OSD description is for reference only. Some OSD items may not be available on your model.
Specifications
| Model | F2422B | F2723B |
|---|---|---|
| Screen size | 23.8’’ | 27’’ |
| Matrix type | IPS | IPS |
| Aspect ratio | 16:9 | |
| Viewing angles | 178 °/ 178 ° | |
| Displayable colours | 16.7M (8-bit) | |
| Resolution | 1920×1080 | |
| FPS | 75Hz | |
| Response time | 5 ms | |
| Brightness | 220 cd/m2 | 230 cd/m2 |
| Contrast | 1000:1 | |
| Interfaces | HDMI 1.4, VGA | |
| Frequency | HDMI 1.4 1920*1080 / 75Hz |
VGA 19201080 / 60Hz
Built-in speakers| No
Screen tilt| 15°/5°
Height adjustment| No| No
Screen rotation| No| No
Monitor Power Options| 12V-2.5A| 12V-3A
External power adapter parameters| 100-240V, 50/60Hz, 0.8A| 100-240V, 50/60Hz,
1.0A
Power consumption in operating mode (max)| <30W| <36W
Standby power consumption| ≤0.5W
Wall mounting| VESA 100×100
Package dimensions| 595125380mm| 675145*430mm
Weight (NET/GROSS):| 2.5 kg/4.45kg| 3.25kg/5.5kg
Troubleshooting
| Problem | Solution |
|---|---|
| Power cannot be turned on | Check that both ends of the power cable are plugged |
into the socket appropriately and the wall socket is operational
No Input signal message| Check that the signal line is connected properly.
Check that the power of the relevant peripherals is turned on.
Check that the Input option tnat has been selected matches with the input
signal.
Image colour or quality deteriarates| Check that all the video settings are
adjusted appropriately, such as brightness, contrast, colour etc.
Display warning message| Check that the input signal line is properly fixed.
Select the correct input signal source
Additional information
The production date is encrypted in the serial number in the format
ERC2E * YYYYMMDD *****, where: YYYYMMDD – year, month and day of
production.
Warranty card
Product information……………………………….
Product………………………………………………..
Model…………………………………………….
Serial number…………………………………..
Seller Information…………………………………
Trade organization name……………………………..
The address………………………………………
Date of sale……………………………………
Seller stamp………………………………………..
Coupon № 3
Seller stamp
Date of the application…………………………….
Cause of damage……………………………………..
Date of completion……………………………..
Coupon № 2
Seller stamp
Date of the application…………………………………
Cause of damage……………………………………………
Date of completion…………………………………………
Coupon № 1
Seller stamp
Date of the application………………………………………..
Cause of damage………………………………………………
Date of completion………………………………………………..
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>